[PATCH V4 04/10] drm/panel: Add driver for lvds/edp based panels
Ajay kumar
ajaynumb at gmail.com
Fri Jun 20 01:07:22 PDT 2014
ping.
On Wed, Jun 11, 2014 at 11:57 PM, Ajay Kumar <ajaykumar.rs at samsung.com> wrote:
> This patch adds a simple driver to handle all the LCD and LED
> powerup/down routines needed to support eDP/LVDS panels.
>
> The LCD and LED units are usually powered up via regulators,
> and almost on all boards, we will have a BACKLIGHT_EN pin to
> enable/ disable the backlight.
> Sometimes, we can have LCD_EN switches as well.
>
> The routines in this driver can be used to control
> panel power sequence on such boards.
>
> Signed-off-by: Ajay Kumar <ajaykumar.rs at samsung.com>
> Signed-off-by: Rahul Sharma <Rahul.Sharma at samsung.com>
> ---
> .../devicetree/bindings/panel/panel-lvds.txt | 50 ++++
> drivers/gpu/drm/panel/Kconfig | 10 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-lvds.c | 262 ++++++++++++++++++++
> 4 files changed, 323 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/panel/panel-lvds.txt
> create mode 100644 drivers/gpu/drm/panel/panel-lvds.c
>
> diff --git a/Documentation/devicetree/bindings/panel/panel-lvds.txt b/Documentation/devicetree/bindings/panel/panel-lvds.txt
> new file mode 100644
> index 0000000..7cb6084
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/panel-lvds.txt
> @@ -0,0 +1,50 @@
> +panel interface for eDP/lvds panels
> +
> +Required properties:
> + - compatible: "panel-lvds"
> +
> +Optional properties:
> + -lcd-en-gpio:
> + panel LCD poweron GPIO.
> + Indicates which GPIO needs to be powered up as output
> + to powerup/enable the switch to the LCD panel.
> + -led-en-gpio:
> + panel LED enable GPIO.
> + Indicates which GPIO needs to be powered up as output
> + to enable the backlight.
> + -panel-prepare-delay:
> + delay value in ms required for panel_prepare process
> + Delay in ms needed for the panel LCD unit to
> + powerup completely.
> + ex: delay needed till eDP panel throws HPD.
> + delay needed so that we cans tart reading edid.
> + -panel-enable-delay:
> + delay value in ms required for panel_enable process
> + Delay in ms needed for the panel backlight/LED unit
> + to powerup, and delay needed between video_enable and
> + backlight_enable.
> + -panel-disable-delay:
> + delay value in ms required for panel_disable process
> + Delay in ms needed for the panel backlight/LED unit
> + powerdown, and delay needed between backlight_disable
> + and video_disable.
> + -panel-unprepare-delay:
> + delay value in ms required for panel_post_disable process
> + Delay in ms needed for the panel LCD unit to
> + to powerdown completely, and the minimum delay needed
> + before powering it on again.
> + -panel-width-mm: physical panel width [mm]
> + -panel-height-mm: physical panel height [mm]
> +
> +Example:
> +
> + panel-lvds {
> + compatible = "panel-lvds";
> + led-en-gpio = <&gpx3 0 1>;
> + panel-prepare-delay = <40>;
> + panel-enable-delay = <20>;
> + panel-disable-delay = <20>;
> + panel-unprepare-delay = <30>;
> + panel-width-mm = <256>;
> + panel-height-mm = <144>;
> + };
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 4ec874d..8fe7ee5 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -30,4 +30,14 @@ config DRM_PANEL_S6E8AA0
> select DRM_MIPI_DSI
> select VIDEOMODE_HELPERS
>
> +config DRM_PANEL_EDP_LVDS
> + tristate "support for eDP/LVDS panels"
> + depends on OF && DRM_PANEL
> + select VIDEOMODE_HELPERS
> + help
> + DRM panel driver for direct eDP panels or LVDS connected
> + via DP bridges, that need at most a regulator for LCD unit,
> + a regulator for LED unit and/or enable GPIOs for LCD or LED units.
> + Delay values can also be specified to support powerup and
> + powerdown process.
> endmenu
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 8b92921..eaafa01 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -1,3 +1,4 @@
> obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
> obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o
> obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
> +obj-$(CONFIG_DRM_PANEL_EDP_LVDS) += panel-lvds.o
> diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
> new file mode 100644
> index 0000000..2124fcb
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-lvds.c
> @@ -0,0 +1,262 @@
> +/*
> + * panel driver for lvds and eDP panels
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd
> + *
> + * Ajay Kumar <ajaykumar.rs at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/module.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/of_videomode.h>
> +#include <video/videomode.h>
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_panel.h>
> +
> +struct panel_lvds {
> + struct drm_panel base;
> + struct regulator *backlight_fet;
> + struct regulator *lcd_fet;
> + struct videomode vm;
> + int width_mm;
> + int height_mm;
> + bool backlight_fet_enabled;
> + bool lcd_fet_enabled;
> + int led_en_gpio;
> + int lcd_en_gpio;
> + int panel_prepare_delay;
> + int panel_enable_delay;
> + int panel_disable_delay;
> + int panel_unprepare_delay;
> +};
> +
> +static inline struct panel_lvds *to_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct panel_lvds, base);
> +}
> +
> +static int panel_lvds_prepare(struct drm_panel *panel)
> +{
> + struct panel_lvds *lvds_panel = to_panel(panel);
> +
> + if (!IS_ERR_OR_NULL(lvds_panel->lcd_fet))
> + if (!lvds_panel->lcd_fet_enabled) {
> + if (regulator_enable(lvds_panel->lcd_fet))
> + DRM_ERROR("failed to enable LCD fet\n");
> + lvds_panel->lcd_fet_enabled = true;
> + }
> +
> + if (gpio_is_valid(lvds_panel->lcd_en_gpio))
> + gpio_set_value(lvds_panel->lcd_en_gpio, 1);
> +
> + msleep(lvds_panel->panel_prepare_delay);
> +
> + return 0;
> +}
> +
> +static int panel_lvds_enable(struct drm_panel *panel)
> +{
> + struct panel_lvds *lvds_panel = to_panel(panel);
> +
> + if (!IS_ERR_OR_NULL(lvds_panel->backlight_fet))
> + if (!lvds_panel->backlight_fet_enabled) {
> + if (regulator_enable(lvds_panel->backlight_fet))
> + DRM_ERROR("failed to enable LED fet\n");
> + lvds_panel->backlight_fet_enabled = true;
> + }
> +
> + msleep(lvds_panel->panel_enable_delay);
> +
> + if (gpio_is_valid(lvds_panel->led_en_gpio))
> + gpio_set_value(lvds_panel->led_en_gpio, 1);
> +
> + return 0;
> +}
> +
> +static int panel_lvds_disable(struct drm_panel *panel)
> +{
> + struct panel_lvds *lvds_panel = to_panel(panel);
> +
> + if (gpio_is_valid(lvds_panel->led_en_gpio))
> + gpio_set_value(lvds_panel->led_en_gpio, 0);
> +
> + if (!IS_ERR_OR_NULL(lvds_panel->backlight_fet))
> + if (lvds_panel->backlight_fet_enabled) {
> + regulator_disable(lvds_panel->backlight_fet);
> + lvds_panel->backlight_fet_enabled = false;
> + }
> +
> + msleep(lvds_panel->panel_disable_delay);
> +
> + return 0;
> +}
> +
> +static int panel_lvds_unprepare(struct drm_panel *panel)
> +{
> + struct panel_lvds *lvds_panel = to_panel(panel);
> +
> + if (gpio_is_valid(lvds_panel->lcd_en_gpio))
> + gpio_set_value(lvds_panel->lcd_en_gpio, 0);
> +
> + if (!IS_ERR_OR_NULL(lvds_panel->lcd_fet))
> + if (lvds_panel->lcd_fet_enabled) {
> + regulator_disable(lvds_panel->lcd_fet);
> + lvds_panel->lcd_fet_enabled = false;
> + }
> +
> + msleep(lvds_panel->panel_unprepare_delay);
> +
> + return 0;
> +}
> +
> +static int panel_lvds_get_modes(struct drm_panel *panel)
> +{
> + struct drm_connector *connector = panel->connector;
> + struct panel_lvds *lvds_panel = to_panel(panel);
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_create(connector->dev);
> + if (!mode) {
> + DRM_ERROR("failed to create a new display mode.\n");
> + return 0;
> + }
> +
> + drm_display_mode_from_videomode(&lvds_panel->vm, mode);
> + mode->width_mm = lvds_panel->width_mm;
> + mode->height_mm = lvds_panel->height_mm;
> + connector->display_info.width_mm = mode->width_mm;
> + connector->display_info.height_mm = mode->height_mm;
> +
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> + drm_mode_set_name(mode);
> + drm_mode_probed_add(connector, mode);
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs panel_lvds_funcs = {
> + .unprepare = panel_lvds_unprepare,
> + .disable = panel_lvds_disable,
> + .prepare = panel_lvds_prepare,
> + .enable = panel_lvds_enable,
> + .get_modes = panel_lvds_get_modes,
> +};
> +
> +static int panel_lvds_probe(struct platform_device *pdev)
> +{
> + struct panel_lvds *panel;
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node;
> + int ret;
> +
> + panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL);
> + if (!panel)
> + return -ENOMEM;
> +
> + ret = of_get_videomode(node, &panel->vm, 0);
> + if (ret) {
> + DRM_ERROR("failed: of_get_videomode() : %d\n", ret);
> + return ret;
> + }
> +
> + panel->lcd_fet = devm_regulator_get_optional(dev, "lcd_vdd");
> + if (IS_ERR(panel->lcd_fet))
> + return -EPROBE_DEFER;
> +
> + panel->backlight_fet = devm_regulator_get_optional(dev, "vcd_led");
> + if (IS_ERR(panel->backlight_fet))
> + return -EPROBE_DEFER;
> +
> + panel->lcd_en_gpio = of_get_named_gpio(node, "lcd-en-gpio", 0);
> + panel->led_en_gpio = of_get_named_gpio(node, "led-en-gpio", 0);
> +
> + of_property_read_u32(node, "panel-width-mm", &panel->width_mm);
> + of_property_read_u32(node, "panel-height-mm", &panel->height_mm);
> +
> + of_property_read_u32(node, "panel-prepare-delay",
> + &panel->panel_prepare_delay);
> + of_property_read_u32(node, "panel-enable-delay",
> + &panel->panel_enable_delay);
> + of_property_read_u32(node, "panel-disable-delay",
> + &panel->panel_disable_delay);
> + of_property_read_u32(node, "panel-unprepare-delay",
> + &panel->panel_unprepare_delay);
> +
> + if (gpio_is_valid(panel->lcd_en_gpio)) {
> + ret = devm_gpio_request_one(dev, panel->lcd_en_gpio,
> + GPIOF_OUT_INIT_LOW, "lcd_en_gpio");
> + if (ret) {
> + DRM_ERROR("failed to get lcd-en gpio [%d]\n", ret);
> + return 0;
> + }
> + } else {
> + panel->lcd_en_gpio = -ENODEV;
> + }
> +
> + if (gpio_is_valid(panel->led_en_gpio)) {
> + ret = devm_gpio_request_one(dev, panel->led_en_gpio,
> + GPIOF_OUT_INIT_LOW, "led_en_gpio");
> + if (ret) {
> + DRM_ERROR("failed to get led-en gpio [%d]\n", ret);
> + return 0;
> + }
> + } else {
> + panel->led_en_gpio = -ENODEV;
> + }
> +
> + drm_panel_init(&panel->base);
> + panel->base.dev = dev;
> + panel->base.funcs = &panel_lvds_funcs;
> +
> + ret = drm_panel_add(&panel->base);
> + if (ret < 0)
> + return ret;
> +
> + dev_set_drvdata(dev, panel);
> +
> + return 0;
> +}
> +
> +static int panel_lvds_remove(struct platform_device *pdev)
> +{
> + struct panel_lvds *panel = dev_get_drvdata(&pdev->dev);
> +
> + panel_lvds_disable(&panel->base);
> + panel_lvds_unprepare(&panel->base);
> +
> + drm_panel_remove(&panel->base);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id lvds_panel_dt_match[] = {
> + { .compatible = "panel-lvds" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, lvds_panel_dt_match);
> +
> +struct platform_driver lvds_panel_driver = {
> + .driver = {
> + .name = "panel_lvds",
> + .owner = THIS_MODULE,
> + .of_match_table = lvds_panel_dt_match,
> + },
> + .probe = panel_lvds_probe,
> + .remove = panel_lvds_remove,
> +};
> +module_platform_driver(lvds_panel_driver);
> +
> +MODULE_AUTHOR("Ajay Kumar <ajaykumar.rs at samsung.com>");
> +MODULE_DESCRIPTION("lvds/eDP panel driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.7.9.5
>
More information about the dri-devel
mailing list