[PATCH 3/9] Doc/DT: Add DT binding documentation for DVI Connector

Geert Uytterhoeven geert at linux-m68k.org
Thu Mar 6 00:39:40 PST 2014


On Wed, Mar 5, 2014 at 9:41 AM, Tomi Valkeinen <tomi.valkeinen at ti.com> wrote:
> On 28/02/14 18:23, Russell King - ARM Linux wrote:
>
>> That's rather a lot of compatible strings.  Another possibility is:
>>
>>       compatible = "dvi-connector";
>>       analog;
>>       digital;
>>       single-link;
>>       dual-link;
>
> I made the following changes compared to the posted version. I decided
> to leave the "single-link" out, as it's implied if "digital" is set.
>
>  Tomi
>
> @@ -6,11 +6,16 @@ Required properties:
>
>  Optional properties:
>  - label: a symbolic name for the connector
> -- i2c-bus: phandle to the i2c bus that is connected to DVI DDC
> +- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC
> +- analog: the connector has DVI analog pins
> +- digital: the connector has DVI digital pins
> +- dual-link: the connector has pins for DVI dual-link
>
>  Required nodes:
>  - Video port for DVI input
>
> +Note: One (or both) of 'analog' or 'digital' must be set.

So dual-link needs both "digital" and "dual-link"?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds


More information about the dri-devel mailing list