[PATCH 02/34] drm/doc: Fix up kerneldoc in drm_edid.c

[Daniel Vetter]

v2: Also do s/RETURNS/Returns/, less yelling in docs is always good.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/drm_edid.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index f3cde90c1d98..af656cfe1e21 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -1098,10 +1098,14 @@ EXPORT_SYMBOL(drm_edid_is_valid);
 /**
  * Get EDID information via I2C.
  *
- * \param adapter : i2c device adaptor
- * \param buf     : EDID data buffer to be filled
- * \param len     : EDID data buffer length
- * \return 0 on success or -1 on failure.
+ * @adapter : i2c device adaptor
+ * @buf: EDID data buffer to be filled
+ * @block: 128 byte EDID block to start fetching from
+ * @len: EDID data buffer length to fetch
+ *
+ * Returns:
+ *
+ * 0 on success or -1 on failure.
  *
  * Try to fetch EDID information by calling i2c driver function.
  */
@@ -1243,9 +1247,11 @@ out:
 
 /**
  * Probe DDC presence.
+ * @adapter: i2c adapter to probe
+ *
+ * Returns:
  *
- * \param adapter : i2c device adaptor
- * \return 1 on success
+ * 1 on success
  */
 bool
 drm_probe_ddc(struct i2c_adapter *adapter)
@@ -1586,8 +1592,10 @@ bad_std_timing(u8 a, u8 b)
 
 /**
  * drm_mode_std - convert standard mode info (width, height, refresh) into mode
+ * @connector: connector of for the EDID block
+ * @edid: EDID block to scan
  * @t: standard timing params
- * @timing_level: standard timing level
+ * @revision: standard timing level
  *
  * Take the standard timing params (in this case width, aspect, and refresh)
  * and convert them into a real mode using CVT/GTF/DMT.
@@ -2132,6 +2140,7 @@ do_established_modes(struct detailed_timing *timing, void *c)
 
 /**
  * add_established_modes - get est. modes from EDID and add them
+ * @connector: connector of for the EDID block
  * @edid: EDID block to scan
  *
  * Each EDID block contains a bitmap of the supported "established modes" list
@@ -2194,6 +2203,7 @@ do_standard_modes(struct detailed_timing *timing, void *c)
 
 /**
  * add_standard_modes - get std. modes from EDID and add them
+ * @connector: connector of for the EDID block
  * @edid: EDID block to scan
  *
  * Standard modes can be calculated using the appropriate standard (DMT,
@@ -3303,6 +3313,7 @@ EXPORT_SYMBOL(drm_detect_hdmi_monitor);
 
 /**
  * drm_detect_monitor_audio - check monitor audio capability
+ * @edid: EDID block to scan
  *
  * Monitor should have CEA extension block.
  * If monitor has 'basic audio', but no CEA audio blocks, it's 'basic
@@ -3348,6 +3359,7 @@ EXPORT_SYMBOL(drm_detect_monitor_audio);
 
 /**
  * drm_rgb_quant_range_selectable - is RGB quantization range selectable?
+ * @edid: EDID block to scan
  *
  * Check whether the monitor reports the RGB quantization range selection
  * as supported. The AVI infoframe can then be used to inform the monitor
-- 
1.8.5.2