[PATCH 4/9] exynos/fimd: add parallel output related bindings

[Andrzej Hajda]

The patch adds bindings required to add support
for parallel output.

Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
---
 Documentation/devicetree/bindings/video/samsung-fimd.txt | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt
index 36b7895..2dad41b 100644
--- a/Documentation/devicetree/bindings/video/samsung-fimd.txt
+++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt
@@ -41,6 +41,21 @@ Optional Properties:
 - samsung,power-domain: a phandle to FIMD power domain node.
 - samsung,invert-vden: video enable signal is inverted
 - samsung,invert-vclk: video clock signal is inverted
+- display-timings: timing settings for FIMD, as described in document [1].
+		Can be used in case timings cannot be provided otherwise
+		or to override timings provided by the panel.
+
+The device node can contain 'port' child nodes according to the bindings defined
+in [2]. The following are properties specific to those nodes:
+- reg: (required) port index, can be:
+		0 - for CAMIF0 input,
+		1 - for CAMIF1 input,
+		2 - for CAMIF2 input,
+		3 - for parallel output,
+		4 - for write-back interface
+
+[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:
 
-- 
1.8.3.2