3.14 radeon regression: radeon is broken (pci bug?)
Bjorn Helgaas
bhelgaas at google.com
Thu Mar 27 10:30:37 PDT 2014
On Mon, Mar 24, 2014 at 4:04 PM, Bjorn Helgaas <bhelgaas at google.com> wrote:
> On Sat, Mar 22, 2014 at 9:18 AM, Andy Lutomirski <luto at amacapital.net> wrote:
>> On Fri, Mar 21, 2014 at 9:37 AM, Bjorn Helgaas <bhelgaas at google.com> wrote:
>>> On Fri, Mar 21, 2014 at 9:49 AM, Andy Lutomirski <luto at amacapital.net> wrote:
>>>> On Fri, Mar 21, 2014 at 7:41 AM, Alex Deucher <alexdeucher at gmail.com> wrote:
>>>>> On Thu, Mar 20, 2014 at 10:17 PM, Andy Lutomirski <luto at amacapital.net> wrote:
>>>>>> My system works on a 3.13 Fedora kernel. It does not work on a
>>>>>> more-or-less identically configured 3.14-rc7+ kernel. The symptom is
>>>>>> that the Plymouth password prompt flashes and them the screen goes
>>>>>> blank. Hitting escape brings back the text console, and all is well
>>>>>> until X tries to start. Then I get a blank screen. killall -9 Xorg
>>>>>> from ssh causes these errors to be logged:
>>>>>>
>>>>>>
>>>>>> [ 226.239747] [drm:atom_op_jump] *ERROR* atombios stuck in loop for
>>>>>> more than 5secs aborting
>>>>>> [ 226.239751] [drm:atom_execute_table_locked] *ERROR* atombios stuck
>>>>>> executing CD34 (len 55, WS 0, PS 0) @ 0xCD57
>>>>>> [ 231.241492] [drm:atom_op_jump] *ERROR* atombios stuck in loop for
>>>>>> more than 5secs aborting
>>>>>> [ 231.241496] [drm:atom_execute_table_locked] *ERROR* atombios stuck
>>>>>> executing CD6C (len 62, WS 0, PS 0) @ 0xCD88
>>>>>> [ 236.243111] [drm:atom_op_jump] *ERROR* atombios stuck in loop for
>>>>>> more than 5secs aborting
>>>>>> [ 236.243115] [drm:atom_execute_table_locked] *ERROR* atombios stuck
>>>>>> executing CD6C (len 62, WS 0, PS 0) @ 0xCD88
>>>>>> [ 241.244625] [drm:atom_op_jump] *ERROR* atombios stuck in loop for
>>>>>> more than 5secs aborting
>>>>>> [ 241.244628] [drm:atom_execute_table_locked] *ERROR* atombios stuck
>>>>>> executing CD6C (len 62, WS 0, PS 0) @ 0xCD88
>>>>>>
>>>>>>
>>>>>> lspci -vvvxxxnn on 3.14-rc7+ says:
>>>>>>
>>>>>> 09:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
>>>>>> [AMD/ATI] Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM] [1002:6779]
>>>>>> (rev ff) (prog-if ff)
>>>>>> !!! Unknown header type 7f
>>>>>> Kernel driver in use: radeon
>>>>>> 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>>> 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>>> 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>>> 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>>>
>>>>>> 09:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI]
>>>>>> Caicos HDMI Audio [Radeon HD 6400 Series] [1002:aa98] (rev ff)
>>>>>> (prog-if ff)
>>>>>> !!! Unknown header type 7f
>>>>>> Kernel driver in use: snd_hda_intel
>>>>>> 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>>> 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>>> 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>>> 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>>>
>>>>>> (oops!)
>>>>>>
>>>>>> On 3.13, it says:
>>>>>>
>>>>>> 09:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
>>>>>> [AMD/ATI] Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM] [1002:6779]
>>>>>> (prog-if 00 [VGA controller])
>>>>>> Subsystem: PC Partner Limited / Sapphire Technology Radeon HD
>>>>>> 6450 1 GB DDR3 [174b:e164]
>>>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>>>> ParErr- Stepping- SERR- FastB2B- DisINTx+
>>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>> Latency: 0, Cache Line Size: 64 bytes
>>>>>> Interrupt: pin A routed to IRQ 92
>>>>>> Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
>>>>>> Region 2: Memory at f4a20000 (64-bit, non-prefetchable) [size=128K]
>>>>>> Region 4: I/O ports at c000 [size=256]
>>>>>> Expansion ROM at f4a00000 [disabled] [size=128K]
>>>>>> Capabilities: <access denied>
>>>>>> Kernel driver in use: radeon
>>>>>> 00: 02 10 79 67 07 04 10 00 00 00 00 03 10 00 80 00
>>>>>> 10: 0c 00 00 e0 00 00 00 00 04 00 a2 f4 00 00 00 00
>>>>>> 20: 01 c0 00 00 00 00 00 00 00 00 00 00 4b 17 64 e1
>>>>>> 30: 00 00 a0 f4 50 00 00 00 00 00 00 00 0a 01 00 00
>>>>>>
>>>>>> 09:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI]
>>>>>> Caicos HDMI Audio [Radeon HD 6400 Series] [1002:aa98]
>>>>>> Subsystem: PC Partner Limited / Sapphire Technology Radeon HD
>>>>>> 6450 1GB DDR3 [174b:aa98]
>>>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>>>> ParErr- Stepping- SERR- FastB2B- DisINTx+
>>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>> Latency: 0, Cache Line Size: 64 bytes
>>>>>> Interrupt: pin B routed to IRQ 96
>>>>>> Region 0: Memory at f4a40000 (64-bit, non-prefetchable) [size=16K]
>>>>>> Capabilities: <access denied>
>>>>>> Kernel driver in use: snd_hda_intel
>>>>>> 00: 02 10 98 aa 06 04 10 00 00 00 03 04 10 00 80 00
>>>>>> 10: 04 00 a4 f4 00 00 00 00 00 00 00 00 00 00 00 00
>>>>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 98 aa
>>>>>> 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 02 00 00
>>>>>>
>>>>>> Logs attached.
>>>
>>> Hi Andy,
>>>
>>> I'm really sorry that you tripped over this, but thanks a lot for the
>>> report. Is there any chance the box is currently running v3.13, and
>>> you could collect the dmesg log from it? I don't see anything unusual
>>> from a PCI perspective in the v3.14-rc7 dmesg; all the PCI device
>>> resources look fine, and we didn't reassign anything. It seems like
>>> the 0000:09:00.x devices just stopped responding for some reason, and
>>> the PCI core shouldn't really be involved after the radeon driver
>>> claims and enables those devices. But it's possible I'd get a clue by
>>> comparing the v3.13 and v3.14-rc7 dmesg logs.
>>
>> Attached. I also clearly screwed something up about my 3.14 config --
>> I meant for it to match the Fedora config, but it doesn't. At least
>> NR_CPUs is too low. That shoudn't break radeon, but maybe something
>> odd happens.
>>
>> 3.14 also complains that it can't find an AGP bridge. 3.13 does not
>> complain about that.
>
> CONFIG_GART_IOMMU is not defined for the 3.13.6-200.rc20.x86_64
> kernel, but apparently it is for your v3.14-rc7 kernel. That explains
> the "No AGP bridge found" difference.
>
> I'm afraid I still can't shed any light on the problem with the radeon device.
Is there any news on this? It would be a shame to release v3.14 with
a known regression.
I opened https://bugzilla.kernel.org/show_bug.cgi?id=73041 as a place
to archive the dmesg, etc.
I looked at the lspci output again (by the way, if you have occasion
to collect that again, do it as root so we can see the capabilites as
well). Apart from the fact that 09:00.0 and 09:00.1 stopped
responding completely, the only differences are that the "Received
Master-Abort" bit is set in some of the bridges. I think this
difference is related to 5b764b834ea9 ("PCI: Stop clearing bridge
Secondary Status when setting up I/O aperture"), which appeared in
v3.14-rc1. I don't think this is related to the problem with the
Radeon device, though.
Bjorn
More information about the dri-devel
mailing list