[PATCH v3 09/12] ARM: dts: exynos4210-trats: add panel node

[Andrzej Hajda]

The patch adds s6e8aa0 panel node for trats.
It adds also trats specific properties for DSI.

Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
---
 arch/arm/boot/dts/exynos4210-trats.dts | 57 ++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 63cc571..996c7e3 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -353,6 +353,63 @@
 		};
 	};
 
+	dsi_0: dsi at 11C80000 {
+		vddcore-supply = <&vusb_reg>;
+		vddio-supply = <&vmipi_reg>;
+		samsung,pll-clock-frequency = <24000000>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 1 {
+				reg = <1>;
+
+				dsi_out: endpoint {
+					remote-endpoint = <&dsi_in>;
+					samsung,burst-clock-frequency = <500000000>;
+					samsung,esc-clock-frequency = <20000000>;
+				};
+			};
+		};
+
+		panel at 0 {
+			reg = <0>;
+			compatible = "samsung,s6e8aa0";
+			vdd3-supply = <&vcclcd_reg>;
+			vci-supply = <&vlcd_reg>;
+			reset-gpios = <&gpy4 5 0>;
+			power-on-delay= <50>;
+			reset-delay = <100>;
+			init-delay = <100>;
+			flip-horizontal;
+			flip-vertical;
+			panel-width-mm = <58>;
+			panel-height-mm = <103>;
+
+			display-timings {
+				timing-0 {
+					clock-frequency = <57153600>;
+					hactive = <720>;
+					vactive = <1280>;
+					hfront-porch = <5>;
+					hback-porch = <5>;
+					hsync-len = <5>;
+					vfront-porch = <13>;
+					vback-porch = <1>;
+					vsync-len = <2>;
+				};
+			};
+
+			port {
+				dsi_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+		};
+	};
+
 	camera {
 		pinctrl-names = "default";
 		pinctrl-0 = <>;
-- 
1.8.3.2