[RFC v3 PATCH v2 10/16] drm/exynos: dsi: add driver data to support Exynos5420
YoungJun Cho
yj44.cho at samsung.com
Tue May 6 17:48:25 PDT 2014
Hi Andrzej,
Thank you for comments.
On 05/05/2014 08:27 PM, Andrzej Hajda wrote:
> On 04/27/2014 03:50 AM, YoungJun Cho wrote:
>> The offset of register DSIM_PLLTMR_REG in Exynos5420 is different
>> from the one in Exynos4 SoC.
>>
>> In case of Exynos5420 SoC, there is no frequency band bit in DSIM_PLLCTRL_REG,
>> and it uses DSIM_PHYCTRL_REG and DSIM_PHYTIMING*_REG instead.
>> So this patch adds driver data to distinguish it.
>>
>> Changelog v2:
>> - Moves exynos_dsi_enable_clocks() after exynos_dsi_reset()
>> (commented by Andrzej Hajda)
>> - Splits D-PHY control setting routines from PLL setting one
>> (commented by Andrzej Hajda)
>>
>> Signed-off-by: YoungJun Cho <yj44.cho at samsung.com>
>> Acked-by: Inki Dae <inki.dae at samsung.com>
>> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
>> ---
>> drivers/gpu/drm/exynos/exynos_drm_dsi.c | 154 ++++++++++++++++++++++++++-----
>> 1 file changed, 132 insertions(+), 22 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> index 4a918ec..c18dba3 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> @@ -17,6 +17,7 @@
>>
>> #include <linux/clk.h>
>> #include <linux/irq.h>
>> +#include <linux/of_device.h>
>> #include <linux/phy/phy.h>
>> #include <linux/regulator/consumer.h>
>>
>> @@ -54,9 +55,12 @@
>>
>> /* FIFO memory AC characteristic register */
>> #define DSIM_PLLCTRL_REG 0x4c /* PLL control register */
>> -#define DSIM_PLLTMR_REG 0x50 /* PLL timer register */
>> #define DSIM_PHYACCHR_REG 0x54 /* D-PHY AC characteristic register */
>> #define DSIM_PHYACCHR1_REG 0x58 /* D-PHY AC characteristic register1 */
>> +#define DSIM_PHYCTRL_REG 0x5c
>> +#define DSIM_PHYTIMING_REG 0x64
>> +#define DSIM_PHYTIMING1_REG 0x68
>> +#define DSIM_PHYTIMING2_REG 0x6c
>>
>> /* DSIM_STATUS */
>> #define DSIM_STOP_STATE_DAT(x) (((x) & 0xf) << 0)
>> @@ -200,6 +204,21 @@
>> #define DSIM_PLL_M(x) ((x) << 4)
>> #define DSIM_PLL_S(x) ((x) << 1)
>>
>> +/* DSIM_PHYTIMING */
>> +#define DSIM_PHYTIMING_LPX(x) ((x) << 8)
>> +#define DSIM_PHYTIMING_HS_EXIT(x) ((x) << 0)
>> +
>> +/* DSIM_PHYTIMING1 */
>> +#define DSIM_PHYTIMING1_CLK_PREPARE(x) ((x) << 24)
>> +#define DSIM_PHYTIMING1_CLK_ZERO(x) ((x) << 16)
>> +#define DSIM_PHYTIMING1_CLK_POST(x) ((x) << 8)
>> +#define DSIM_PHYTIMING1_CLK_TRAIL(x) ((x) << 0)
>> +
>> +/* DSIM_PHYTIMING2 */
>> +#define DSIM_PHYTIMING2_HS_PREPARE(x) ((x) << 16)
>> +#define DSIM_PHYTIMING2_HS_ZERO(x) ((x) << 8)
>> +#define DSIM_PHYTIMING2_HS_TRAIL(x) ((x) << 0)
>> +
>> #define DSI_MAX_BUS_WIDTH 4
>> #define DSI_NUM_VIRTUAL_CHANNELS 4
>> #define DSI_TX_FIFO_SIZE 2048
>> @@ -233,6 +252,12 @@ struct exynos_dsi_transfer {
>> #define DSIM_STATE_INITIALIZED BIT(1)
>> #define DSIM_STATE_CMD_LPM BIT(2)
>>
>> +struct exynos_dsi_driver_data {
>> + unsigned int plltmr_reg;
>> +
>> + unsigned int has_freqband:1;
>> +};
>> +
>> struct exynos_dsi {
>> struct mipi_dsi_host dsi_host;
>> struct drm_connector connector;
>> @@ -262,11 +287,39 @@ struct exynos_dsi {
>>
>> spinlock_t transfer_lock; /* protects transfer_list */
>> struct list_head transfer_list;
>> +
>> + struct exynos_dsi_driver_data *driver_data;
>> };
>>
>> #define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
>> #define connector_to_dsi(c) container_of(c, struct exynos_dsi, connector)
>>
>> +static struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
>> + .plltmr_reg = 0x50,
>> + .has_freqband = 1,
>> +};
>> +
>> +static struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
>> + .plltmr_reg = 0x58,
>> +};
>> +
>> +static struct of_device_id exynos_dsi_of_match[] = {
>> + { .compatible = "samsung,exynos4210-mipi-dsi",
>> + .data = &exynos4_dsi_driver_data },
>> + { .compatible = "samsung,exynos5420-mipi-dsi",
>> + .data = &exynos5_dsi_driver_data },
>> + { }
>> +};
>
> I raise again issue of compatible string.
> Since exynos5410 DSIM contains DSIM_VERSION register, it is better
> to use this register instead of compatible string to distinguish
> device versions. So as a compatible we should use the first exynos
> chipset containing this field. AFAIK it is exynos5410.
> So the only thing you should do is to change compatible string from
> samsung,exynos5420-mipi-dsi to samsung,exynos5410-mipi-dsi.
>
>>
>> I posted RFC v3 without this try.
>>
>> Because there is no exynos5410 relevant DTS yet,
>> and making exynos5410 DTS is out of scope for this RFC.
>
>
> It is irrelevant.
>
Ok, I'll fix it.
Thank you.
Best regards YJ
> Regards
> Andrzej
>
>
>> +
>> +static inline struct exynos_dsi_driver_data *exynos_dsi_get_driver_data(
>> + struct platform_device *pdev)
>> +{
>> + const struct of_device_id *of_id =
>> + of_match_device(exynos_dsi_of_match, &pdev->dev);
>> +
>> + return (struct exynos_dsi_driver_data *)of_id->data;
>> +}
>> +
>> static void exynos_dsi_wait_for_reset(struct exynos_dsi *dsi)
>> {
>> if (wait_for_completion_timeout(&dsi->completed, msecs_to_jiffies(300)))
>> @@ -340,14 +393,9 @@ static unsigned long exynos_dsi_pll_find_pms(struct exynos_dsi *dsi,
>> static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
>> unsigned long freq)
>> {
>> - static const unsigned long freq_bands[] = {
>> - 100 * MHZ, 120 * MHZ, 160 * MHZ, 200 * MHZ,
>> - 270 * MHZ, 320 * MHZ, 390 * MHZ, 450 * MHZ,
>> - 510 * MHZ, 560 * MHZ, 640 * MHZ, 690 * MHZ,
>> - 770 * MHZ, 870 * MHZ, 950 * MHZ,
>> - };
>> + struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
>> unsigned long fin, fout;
>> - int timeout, band;
>> + int timeout;
>> u8 p, s;
>> u16 m;
>> u32 reg;
>> @@ -368,18 +416,30 @@ static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
>> "failed to find PLL PMS for requested frequency\n");
>> return -EFAULT;
>> }
>> + dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d)\n", fout, p, m, s);
>>
>> - for (band = 0; band < ARRAY_SIZE(freq_bands); ++band)
>> - if (fout < freq_bands[band])
>> - break;
>> + writel(500, dsi->reg_base + driver_data->plltmr_reg);
>> +
>> + reg = DSIM_PLL_EN | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
>> +
>> + if (driver_data->has_freqband) {
>> + static const unsigned long freq_bands[] = {
>> + 100 * MHZ, 120 * MHZ, 160 * MHZ, 200 * MHZ,
>> + 270 * MHZ, 320 * MHZ, 390 * MHZ, 450 * MHZ,
>> + 510 * MHZ, 560 * MHZ, 640 * MHZ, 690 * MHZ,
>> + 770 * MHZ, 870 * MHZ, 950 * MHZ,
>> + };
>> + int band;
>> +
>> + for (band = 0; band < ARRAY_SIZE(freq_bands); ++band)
>> + if (fout < freq_bands[band])
>> + break;
>>
>> - dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d), band %d\n", fout,
>> - p, m, s, band);
>> + dev_dbg(dsi->dev, "band %d\n", band);
>>
>> - writel(500, dsi->reg_base + DSIM_PLLTMR_REG);
>> + reg |= DSIM_FREQ_BAND(band);
>> + }
>>
>> - reg = DSIM_FREQ_BAND(band) | DSIM_PLL_EN
>> - | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
>> writel(reg, dsi->reg_base + DSIM_PLLCTRL_REG);
>>
>> timeout = 1000;
>> @@ -433,6 +493,59 @@ static int exynos_dsi_enable_clock(struct exynos_dsi *dsi)
>> return 0;
>> }
>>
>> +static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
>> +{
>> + struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
>> + u32 reg;
>> +
>> + if (driver_data->has_freqband)
>> + return;
>> +
>> + /* B D-PHY */
>> + reg = 0x0af & 0x1ff;
>> + writel(reg, dsi->reg_base + DSIM_PHYCTRL_REG);
>> +
>> + /*
>> + * T LPX: Transmitted length of any Low-Power state period
>> + * T HS-EXIT: Time that the transmitter drives LP-11 following a HS
>> + * burst
>> + */
>> + reg = DSIM_PHYTIMING_LPX(0x06) | DSIM_PHYTIMING_HS_EXIT(0x0b);
>> + writel(reg, dsi->reg_base + DSIM_PHYTIMING_REG);
>> +
>> + /*
>> + * T CLK-PREPARE: Time that the transmitter drives the Clock Lane LP-00
>> + * Line state immediately before the HS-0 Line state starting the
>> + * HS transmission
>> + * T CLK-ZERO: Time that the transmitter drives the HS-0 state prior to
>> + * transmitting the Clock.
>> + * T CLK_POST: Time that the transmitter continues to send HS clock
>> + * after the last associated Data Lane has transitioned to LP Mode
>> + * Interval is defined as the period from the end of T HS-TRAIL to
>> + * the beginning of T CLK-TRAIL
>> + * T CLK-TRAIL: Time that the transmitter drives the HS-0 state after
>> + * the last payload clock bit of a HS transmission burst
>> + */
>> + reg = DSIM_PHYTIMING1_CLK_PREPARE(0x07) |
>> + DSIM_PHYTIMING1_CLK_ZERO(0x27) |
>> + DSIM_PHYTIMING1_CLK_POST(0x0d) |
>> + DSIM_PHYTIMING1_CLK_TRAIL(0x08);
>> + writel(reg, dsi->reg_base + DSIM_PHYTIMING1_REG);
>> +
>> + /*
>> + * T HS-PREPARE: Time that the transmitter drives the Data Lane LP-00
>> + * Line state immediately before the HS-0 Line state starting the
>> + * HS transmission
>> + * T HS-ZERO: Time that the transmitter drives the HS-0 state prior to
>> + * transmitting the Sync sequence.
>> + * T HS-TRAIL: Time that the transmitter drives the flipped differential
>> + * state after last payload data bit of a HS transmission burst
>> + */
>> + reg = DSIM_PHYTIMING2_HS_PREPARE(0x09) | DSIM_PHYTIMING2_HS_ZERO(0x0d) |
>> + DSIM_PHYTIMING2_HS_TRAIL(0x0b);
>> + writel(reg, dsi->reg_base + DSIM_PHYTIMING2_REG);
>> +}
>> +
>> static void exynos_dsi_disable_clock(struct exynos_dsi *dsi)
>> {
>> u32 reg;
>> @@ -947,10 +1060,11 @@ static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
>>
>> static int exynos_dsi_init(struct exynos_dsi *dsi)
>> {
>> - exynos_dsi_enable_clock(dsi);
>> exynos_dsi_reset(dsi);
>> enable_irq(dsi->irq);
>> + exynos_dsi_enable_clock(dsi);
>> exynos_dsi_wait_for_reset(dsi);
>> + exynos_dsi_set_phy_ctrl(dsi);
>> exynos_dsi_init_link(dsi);
>>
>> return 0;
>> @@ -1412,6 +1526,7 @@ static int exynos_dsi_probe(struct platform_device *pdev)
>> dsi->dsi_host.dev = &pdev->dev;
>>
>> dsi->dev = &pdev->dev;
>> + dsi->driver_data = exynos_dsi_get_driver_data(pdev);
>>
>> ret = exynos_dsi_parse_dt(dsi);
>> if (ret)
>> @@ -1516,11 +1631,6 @@ static const struct dev_pm_ops exynos_dsi_pm_ops = {
>> SET_SYSTEM_SLEEP_PM_OPS(exynos_dsi_suspend, exynos_dsi_resume)
>> };
>>
>> -static struct of_device_id exynos_dsi_of_match[] = {
>> - { .compatible = "samsung,exynos4210-mipi-dsi" },
>> - { }
>> -};
>> -
>> struct platform_driver dsi_driver = {
>> .probe = exynos_dsi_probe,
>> .remove = exynos_dsi_remove,
>>
>
>
More information about the dri-devel
mailing list