[PATCH] drm: Perform cmdline mode parsing during connector initialisation
Chris Wilson
chris at chris-wilson.co.uk
Thu May 15 02:54:36 PDT 2014
i915.ko has a custom fbdev initialisation routine that aims to preserve
the current mode set by the BIOS, unless overruled by the user. The
user's wishes are determined by what, if any, mode is specified on the
command line (via the video= parameter). However, that command line mode
is first parsed by drm_fb_helper_initial_config() which is called after
i915.ko's custom initial_config() as a fallback method. So in order for
us to honour it, we need to move the cmdline parser earlier. If we
perform the connector cmdline parsing as soon as we initialise the
connector, that cmdline mode and forced status is then available even if
the fbdev helper is not compiled in or never called.
We also then expose the cmdline user mode in the connector mode lists.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes at virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/drm_crtc.c | 56 +++++++++++++++++++++++++++++++
drivers/gpu/drm/drm_fb_helper.c | 64 ++----------------------------------
drivers/gpu/drm/drm_modes.c | 1 +
drivers/gpu/drm/drm_probe_helper.c | 17 ++++++++++
drivers/gpu/drm/i915/intel_drv.h | 5 ---
include/drm/drm_crtc.h | 1 +
include/drm/drm_fb_helper.h | 1 -
7 files changed, 78 insertions(+), 67 deletions(-)
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 461d19b..93c9198 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -799,6 +799,60 @@ static void drm_mode_remove(struct drm_connector *connector,
}
/**
+ * drm_connector_get_cmdline_mode - reads the user's cmdline mode
+ * @connector: connector to quwery
+ * @mode: returned mode
+ *
+ * The kernel supports per-connector configration of its consoles through
+ * use of the video= parameter. This function parses that option and
+ * extracts the user's specified mode (or enable/disable status) for a
+ * particular connector. This is typically only used during the early fbdev
+ * setup.
+ */
+static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
+{
+ struct drm_cmdline_mode *mode = &connector->cmdline_mode;
+ char *option = NULL;
+
+ if (fb_get_options(drm_get_connector_name(connector), &option))
+ return;
+
+ if (!drm_mode_parse_command_line_for_connector(option,
+ connector,
+ mode))
+ return;
+
+ if (mode->force) {
+ const char *s;
+
+ switch (mode->force) {
+ case DRM_FORCE_OFF:
+ s = "OFF";
+ break;
+ case DRM_FORCE_ON_DIGITAL:
+ s = "ON - dig";
+ break;
+ default:
+ case DRM_FORCE_ON:
+ s = "ON";
+ break;
+ }
+
+ DRM_INFO("forcing %s connector %s\n",
+ drm_get_connector_name(connector), s);
+ connector->force = mode->force;
+ }
+
+ DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
+ drm_get_connector_name(connector),
+ mode->xres, mode->yres,
+ mode->refresh_specified ? mode->refresh : 60,
+ mode->rb ? " reduced blanking" : "",
+ mode->margins ? " with margins" : "",
+ mode->interlace ? " interlaced" : "");
+}
+
+/**
* drm_connector_init - Init a preallocated connector
* @dev: DRM device
* @connector: the connector to init
@@ -842,6 +896,8 @@ int drm_connector_init(struct drm_device *dev,
connector->edid_blob_ptr = NULL;
connector->status = connector_status_unknown;
+ drm_connector_get_cmdline_mode(connector);
+
list_add_tail(&connector->head, &dev->mode_config.connector_list);
dev->mode_config.num_connector++;
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index e95ed58..c3b53f9 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -105,60 +105,6 @@ fail:
}
EXPORT_SYMBOL(drm_fb_helper_single_add_all_connectors);
-static int drm_fb_helper_parse_command_line(struct drm_fb_helper *fb_helper)
-{
- struct drm_fb_helper_connector *fb_helper_conn;
- int i;
-
- for (i = 0; i < fb_helper->connector_count; i++) {
- struct drm_cmdline_mode *mode;
- struct drm_connector *connector;
- char *option = NULL;
-
- fb_helper_conn = fb_helper->connector_info[i];
- connector = fb_helper_conn->connector;
- mode = &fb_helper_conn->cmdline_mode;
-
- /* do something on return - turn off connector maybe */
- if (fb_get_options(drm_get_connector_name(connector), &option))
- continue;
-
- if (drm_mode_parse_command_line_for_connector(option,
- connector,
- mode)) {
- if (mode->force) {
- const char *s;
- switch (mode->force) {
- case DRM_FORCE_OFF:
- s = "OFF";
- break;
- case DRM_FORCE_ON_DIGITAL:
- s = "ON - dig";
- break;
- default:
- case DRM_FORCE_ON:
- s = "ON";
- break;
- }
-
- DRM_INFO("forcing %s connector %s\n",
- drm_get_connector_name(connector), s);
- connector->force = mode->force;
- }
-
- DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
- drm_get_connector_name(connector),
- mode->xres, mode->yres,
- mode->refresh_specified ? mode->refresh : 60,
- mode->rb ? " reduced blanking" : "",
- mode->margins ? " with margins" : "",
- mode->interlace ? " interlaced" : "");
- }
-
- }
- return 0;
-}
-
static void drm_fb_helper_save_lut_atomic(struct drm_crtc *crtc, struct drm_fb_helper *helper)
{
uint16_t *r_base, *g_base, *b_base;
@@ -910,7 +856,7 @@ static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper,
struct drm_fb_helper_connector *fb_helper_conn = fb_helper->connector_info[i];
struct drm_cmdline_mode *cmdline_mode;
- cmdline_mode = &fb_helper_conn->cmdline_mode;
+ cmdline_mode = &fb_helper_conn->connector->cmdline_mode;
if (cmdline_mode->bpp_specified) {
switch (cmdline_mode->bpp) {
@@ -1158,9 +1104,7 @@ EXPORT_SYMBOL(drm_has_preferred_mode);
static bool drm_has_cmdline_mode(struct drm_fb_helper_connector *fb_connector)
{
- struct drm_cmdline_mode *cmdline_mode;
- cmdline_mode = &fb_connector->cmdline_mode;
- return cmdline_mode->specified;
+ return fb_connector->connector->cmdline_mode.specified;
}
struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_connector *fb_helper_conn,
@@ -1170,7 +1114,7 @@ struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_connector *f
struct drm_display_mode *mode = NULL;
bool prefer_non_interlace;
- cmdline_mode = &fb_helper_conn->cmdline_mode;
+ cmdline_mode = &fb_helper_conn->connector->cmdline_mode;
if (cmdline_mode->specified == false)
return mode;
@@ -1555,8 +1499,6 @@ bool drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel)
struct drm_device *dev = fb_helper->dev;
int count = 0;
- drm_fb_helper_parse_command_line(fb_helper);
-
mutex_lock(&dev->mode_config.mutex);
count = drm_fb_helper_probe_connector_modes(fb_helper,
dev->mode_config.max_width,
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index bedf189..d1b7d20 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1259,6 +1259,7 @@ drm_mode_create_from_cmdline_mode(struct drm_device *dev,
if (!mode)
return NULL;
+ mode->type |= DRM_MODE_TYPE_USERDEF;
drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
return mode;
}
diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 79f07f2..006e3f9 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -82,6 +82,22 @@ static void drm_mode_validate_flag(struct drm_connector *connector,
return;
}
+static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector)
+{
+ struct drm_display_mode *mode;
+
+ if (!connector->cmdline_mode.specified)
+ return 0;
+
+ mode = drm_mode_create_from_cmdline_mode(connector->dev,
+ &connector->cmdline_mode);
+ if (mode == NULL)
+ return 0;
+
+ drm_mode_probed_add(connector, mode);
+ return 1;
+}
+
static int drm_helper_probe_single_connector_modes_merge_bits(struct drm_connector *connector,
uint32_t maxX, uint32_t maxY, bool merge_type_bits)
{
@@ -134,6 +150,7 @@ static int drm_helper_probe_single_connector_modes_merge_bits(struct drm_connect
if (count == 0 && connector->status == connector_status_connected)
count = drm_add_modes_noedid(connector, 1024, 768);
+ count += drm_helper_probe_add_cmdline_mode(connector);
if (count == 0)
goto prune;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 32a74e1..f38f941 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -828,7 +828,6 @@ void intel_dvo_init(struct drm_device *dev);
/* legacy fbdev emulation in intel_fbdev.c */
#ifdef CONFIG_DRM_I915_FBDEV
extern int intel_fbdev_init(struct drm_device *dev);
-extern void intel_fbdev_initial_config(struct drm_device *dev);
extern void intel_fbdev_fini(struct drm_device *dev);
extern void intel_fbdev_set_suspend(struct drm_device *dev, int state);
extern void intel_fbdev_output_poll_changed(struct drm_device *dev);
@@ -839,10 +838,6 @@ static inline int intel_fbdev_init(struct drm_device *dev)
return 0;
}
-static inline void intel_fbdev_initial_config(struct drm_device *dev)
-{
-}
-
static inline void intel_fbdev_fini(struct drm_device *dev)
{
}
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index c061bb3..4dde1fb 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -508,6 +508,7 @@ struct drm_connector {
void *helper_private;
/* forced on connector */
+ struct drm_cmdline_mode cmdline_mode;
enum drm_connector_force force;
uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
struct drm_encoder *encoder; /* currently active encoder */
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 6e622f7..a8ae1b9 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -77,7 +77,6 @@ struct drm_fb_helper_funcs {
struct drm_fb_helper_connector {
struct drm_connector *connector;
- struct drm_cmdline_mode cmdline_mode;
};
struct drm_fb_helper {
--
1.7.9.5
More information about the dri-devel
mailing list