[PATCH] drivers/gpu/drm/i915/intel_display: coding style fixes

[Daniel Vetter]

On Sun, May 18, 2014 at 02:24:50AM +0200, Robin Schroer wrote:
> Fixed several switch statements, curly braces, dereference operators
> and keywords.
> 
> Signed-off-by: Robin Schroer <sulamiification at gmail.com>

Queued for -next, thanks for the patch.
-Daniel
> ---
>  drivers/gpu/drm/i915/intel_display.c | 18 ++++++++----------
>  1 file changed, 8 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index b9256aa..ff21924 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -962,7 +962,7 @@ bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
>  	u32 bit;
> 
>  	if (HAS_PCH_IBX(dev_priv->dev)) {
> -		switch(port->port) {
> +		switch (port->port) {
>  		case PORT_B:
>  			bit = SDE_PORTB_HOTPLUG;
>  			break;
> @@ -976,7 +976,7 @@ bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
>  			return true;
>  		}
>  	} else {
> -		switch(port->port) {
> +		switch (port->port) {
>  		case PORT_B:
>  			bit = SDE_PORTB_HOTPLUG_CPT;
>  			break;
> @@ -3221,9 +3221,8 @@ static void ironlake_fdi_disable(struct drm_crtc *crtc)
>  	udelay(100);
> 
>  	/* Ironlake workaround, disable clock pointer after downing FDI */
> -	if (HAS_PCH_IBX(dev)) {
> +	if (HAS_PCH_IBX(dev))
>  		I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
> -	}
> 
>  	/* still set train pattern 1 */
>  	reg = FDI_TX_CTL(pipe);
> @@ -5844,7 +5843,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
>  	} else {
>  		i9xx_update_pll(intel_crtc,
>  				has_reduced_clock ? &reduced_clock : NULL,
> -                                num_connectors);
> +				num_connectors);
>  	}
> 
>  skip_dpll:
> @@ -6220,8 +6219,7 @@ static void ironlake_init_pch_refclk(struct drm_device *dev)
>  			if (intel_panel_use_ssc(dev_priv) && can_ssc) {
>  				DRM_DEBUG_KMS("Using SSC on eDP\n");
>  				val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
> -			}
> -			else
> +			} else
>  				val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
>  		} else
>  			val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
> @@ -8844,7 +8842,7 @@ void intel_prepare_page_flip(struct drm_device *dev, int plane)
>  	spin_unlock_irqrestore(&dev->event_lock, flags);
>  }
> 
> -inline static void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
> +static inline void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
>  {
>  	/* Ensure that the work item is consistent when activating it ... */
>  	smp_wmb();
> @@ -9054,7 +9052,7 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
>  	if (ret)
>  		goto err;
> 
> -	switch(intel_crtc->plane) {
> +	switch (intel_crtc->plane) {
>  	case PLANE_A:
>  		plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
>  		break;
> @@ -9333,7 +9331,7 @@ static void intel_modeset_commit_output_state(struct drm_device *dev)
>  }
> 
>  static void
> -connected_sink_compute_bpp(struct intel_connector * connector,
> +connected_sink_compute_bpp(struct intel_connector *connector,
>  			   struct intel_crtc_config *pipe_config)
>  {
>  	int bpp = pipe_config->pipe_bpp;
> --
> 1.9.0
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch