[PATCH v2 02/18] drm/exynos: use wait_event_timeout() for safety usage

[YoungJun Cho]

Hi Daniel,

On 05/21/2014 03:45 PM, Daniel Kurtz wrote:
> On Wed, May 21, 2014 at 2:28 PM, YoungJun Cho <yj44.cho at samsung.com> wrote:
>> Hi Daniel
>>
>>
>> On 05/21/2014 03:01 PM, Daniel Kurtz wrote:
>>>
>>> On Wed, May 21, 2014 at 12:42 PM, YoungJun Cho <yj44.cho at samsung.com>
>>> wrote:
>>>>
>>>> There could be the case that the page flip operation isn't finished
>>>> correctly
>>>> with some abnormal condition such as panel reset. So this patch replaces
>>>> wait_event() with wait_event_timeout() to avoid waiting for page flip
>>>> completion
>>>> infinitely.
>>>> And clears exynos_crtc->pending_flip in exynos_drm_crtc_page_flip() when
>>>> exynos_drm_crtc_mode_set_commit() is failed.
>>>>
>>>> Signed-off-by: YoungJun Cho <yj44.cho at samsung.com>
>>>> Acked-by: Inki Dae <inki.dae at samsung.com>
>>>> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
>>>> ---
>>>>    drivers/gpu/drm/exynos/exynos_drm_crtc.c |    7 +++++--
>>>>    1 file changed, 5 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
>>>> b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
>>>> index 95c9435..3bf091d 100644
>>>> --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
>>>> +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
>>>> @@ -69,8 +69,10 @@ static void exynos_drm_crtc_dpms(struct drm_crtc
>>>> *crtc, int mode)
>>>>
>>>>           if (mode > DRM_MODE_DPMS_ON) {
>>>>                   /* wait for the completion of page flip. */
>>>> -               wait_event(exynos_crtc->pending_flip_queue,
>>>> -                               atomic_read(&exynos_crtc->pending_flip)
>>>> == 0);
>>>> +               if (!wait_event_timeout(exynos_crtc->pending_flip_queue,
>>>> +                               !atomic_read(&exynos_crtc->pending_flip),
>>>> +                               HZ/20))
>>>> +                       atomic_set(&exynos_crtc->pending_flip, 0);
>>>
>>>
>>> I meant that changing this to wait_event_timeout() seems to be masking
>>> the original problem, that pending_flip wasn't being cleared.
>>
>>
>> Yes, I agree.
>>
>> The original purpose of this patch is to avoid lock-up during modetest (with
>> test_vsync) with command mode panel.
>> In MIPI DSI command mode interface, the display controller can not generate
>> VSYNC signal and uses TE signal instead which is generated by panel.
>> If there is an abnormal power off or reset condition, it is possible that

At first, I omitted the keyword "panel" at previous reply.
The abnormal power off or reset condition could be happened in panel
which generates TE signal.

>> the display controller misses the TE signal and it makes lock-up.
>> So I needed this patch.
>
> If flips are not completing on MIPI DSI, may I recommend that you
> start a timer when scheduling such a flip in the MIPI DSI driver that
> will expire after a timeout.  In that timer's expiration handler, you

The MIPI DSI doesn't take care page flip operation at all.
And the exynos_drm_crtc_finish_page_flip() is called only by interrupt 
handler of display controllers.
So there is no suitable place to set time-out for this.

> can then go through the normal process of completing a flip.  This
> would make the timeout transparent to the generic exynos_drm_crtc
> layer, which can then do its normal flip complete processing: send
> pending vblank events, put vblank, clear pending_flip, etc.
> Does that make sense?
> Is it possible?

This function is exynos_drm_crtc_dpms() and my patch is for DPMS OFF case.
That means all page flip operations should be finished already to
control DPMS off and in almost every case, there is no problem.

But if there is an issue like this lock-up, I think it should escape 
this condition.

Thank you.
Best regards YJ

>
> -Dan
>
>>> Now that you are now clearing pending_flip in the error path, you
>>> don't need the timeout, right?
>>>
>>
>> There might be my missing point. Would you explain more detail?
>>
>>
>> Thank you.
>> Best regards YJ
>>
>>> -Dan
>>>
>>>>                   drm_vblank_off(crtc->dev, exynos_crtc->pipe);
>>>>           }
>>>>
>>>> @@ -259,6 +261,7 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc
>>>> *crtc,
>>>>                           spin_lock_irq(&dev->event_lock);
>>>>                           drm_vblank_put(dev, exynos_crtc->pipe);
>>>>                           list_del(&event->base.link);
>>>> +                       atomic_set(&exynos_crtc->pending_flip, 0);
>>>>                           spin_unlock_irq(&dev->event_lock);
>>>>
>>>>                           goto out;
>>>> --
>>>> 1.7.9.5
>>>>
>>>
>>
>