[PATCH v3] drm/exynos: enable fimd clocks in probe before accessing fimd registers

[Sachin Kamat]

Hi Rahul,

On 22 May 2014 19:41, Rahul Sharma <rahul.sharma at samsung.com> wrote:
> Fimd probe is accessing fimd Registers without enabling the fimd
> gate clocks. If FIMD clocks are kept disabled in Uboot or disbaled
> during kernel boottime, the system hangs during boottime.
>
> This issue got surfaced when verifying with sysmmu enabled. Probe of
> fimd Sysmmu enables the master clock before accessing sysmmu regs and
> then disables. Later fimd probe tries to read the register without
> enabling the clock which is wrong and hangs the system.
>
> Signed-off-by: Rahul Sharma <Rahul.Sharma at samsung.com>
> ---
>  drivers/gpu/drm/exynos/exynos_drm_fimd.c |   17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> index bd30d0c..38b77ed 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> @@ -898,16 +898,31 @@ static int fimd_bind(struct device *dev, struct device *master, void *data)
>  {
>         struct fimd_context *ctx = fimd_manager.ctx;
>         struct drm_device *drm_dev = data;
> -       int win;
> +       int win, ret;
>
>         fimd_mgr_initialize(&fimd_manager, drm_dev);
>         exynos_drm_crtc_create(&fimd_manager);
>         if (ctx->display)
>                 exynos_drm_create_enc_conn(drm_dev, ctx->display);
>
> +       ret = clk_prepare_enable(ctx->bus_clk);
> +       if (ret) {
> +               dev_err(dev, "bus clock enable failed.\n");
> +               return ret;
> +       }
> +
> +       ret = clk_prepare_enable(ctx->lcd_clk);
> +       if (ret) {
> +               dev_err(dev, "lcd clock enable failed.\n");

Add clk_disable_unprepare(ctx->bus_clk) before returning on error.

> +               return ret;
> +       }
> +
>         for (win = 0; win < WINDOWS_NR; win++)
>                 fimd_clear_win(ctx, win);
>
> +       clk_disable_unprepare(ctx->lcd_clk);
> +       clk_disable_unprepare(ctx->bus_clk);
> +
>         return 0;
>
>  }
> --
> 1.7.9.5
>



-- 
With warm regards,
Sachin