[PATCH] drm/panel: add support for AUO B133XTN01 panel
Stéphane Marchesin
stephane.marchesin at gmail.com
Fri May 23 19:34:30 PDT 2014
On Thu, May 22, 2014 at 4:02 AM, Thierry Reding <thierry.reding at gmail.com>wrote:
> On Tue, May 20, 2014 at 04:36:48PM -0700, Stéphane Marchesin wrote:
> > This panel is used by my tegra board and supported by the simple-panel
> > driver.
>
> One thing I like to have is some indication in the commit message about
> which board this panel is used on. Of course if you can't disclose that
> yet I'll still take the patch, but perhaps you can be a little more
> specific than "my Tegra board".
>
> There also seem to be different variants of this panel. I've come across
> datasheets for B133XTN01.0 and B133XTN01.2. The 1.0 seems to be native
> LVDS whereas it looks as if the 1.2 comes with an additional module to
> connect it to eDP. Which one is it that you use? I guess independent of
> the specific model the timings will still work, but device tree mandates
> that the compatible for the most specific model be used. Perhaps this
> panel should be:
>
>
I'm using the B133XTN01.2. The panel specs are not exactly the same (the
1.2 has a single clock, 69.5MHz while the 1.0 does 60-80MHz), but the fixed
timing that I put in the DT will work on both.
Stéphane
> compatible = "auo,b133xtn01.2", "auo,b133xtn01", "simple-panel";
>
> That would allow the panel-simple driver to match on "auo,b133xtn01" and
> pick up the timing that presumably works for both.
>
> One other nit below:
>
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> b/drivers/gpu/drm/panel/panel-simple.c
> [...]
> > +static const struct panel_desc auo_b133xtn01 = {
> > + .modes = &auo_b133xtn01_mode,
> > + .num_modes = 1,
> > + .size = {
> > + .width = 293,
> > + .height = 164,
>
> According to the datasheet I found this is 164.97 mm, in which case I
> think it may be better to round up to get a more accurate value of the
> DPI.
>
> Thierry
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20140523/0f552ed4/attachment-0001.html>
More information about the dri-devel
mailing list