[PATCH 03/17] drm: fixup kerneldoc in drm_crtc.h
Daniel Vetter
daniel at ffwll.ch
Sun Nov 2 11:19:09 PST 2014
On Sun, Nov 02, 2014 at 02:19:16PM +0100, Daniel Vetter wrote:
> I've tried to cc all the people who have recently added new stuff
> but forgotten to update documentation.
>
> I've also decided not to bother documenting the massive property list
> in struct drm_mode_config. If that beast keeps on growing we might want
> to extract it into a separate structure which we won't document.
>
> Cc: Thomas Wood <thomas.wood at intel.com>
> Cc: Sean Paul <seanpaul at chromium.org>
> Cc: Russell King <rmk+kernel at arm.linux.org.uk>
> Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
Oops, I've somehow lost Sean's r-b on this and the preceeding patch.
Resent the preceeding patch since that had one small change Sean requested
and added his r-b locally to both.
-Daniel
> ---
> include/drm/drm_crtc.h | 51 +++++++++++++++++++++++++++++++++++---------------
> 1 file changed, 36 insertions(+), 15 deletions(-)
>
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 21a15850a4d5..a68e02be7e37 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -231,6 +231,7 @@ struct drm_bridge;
> * @restore: restore CRTC state
> * @reset: reset CRTC after state has been invalidated (e.g. resume)
> * @cursor_set: setup the cursor
> + * @cursor_set2: setup the cursor with hotspot, superseeds @cursor_set if set
> * @cursor_move: move the cursor
> * @gamma_set: specify color ramp for CRTC
> * @destroy: deinit and free object
> @@ -292,11 +293,14 @@ struct drm_crtc_funcs {
> /**
> * struct drm_crtc - central CRTC control structure
> * @dev: parent DRM device
> + * @port: OF node used by drm_of_find_possible_crtcs()
> * @head: list management
> * @mutex: per-CRTC locking
> * @base: base KMS object for ID tracking etc.
> * @primary: primary plane for this CRTC
> * @cursor: cursor plane for this CRTC
> + * @cursor_x: current x position of the cursor, used for universal cursor planes
> + * @cursor_y: current y position of the cursor, used for universal cursor planes
> * @enabled: is this CRTC enabled?
> * @mode: current mode timings
> * @hwmode: mode timings as programmed to hw regs
> @@ -309,10 +313,12 @@ struct drm_crtc_funcs {
> * @gamma_size: size of gamma ramp
> * @gamma_store: gamma ramp values
> * @framedur_ns: precise frame timing
> - * @framedur_ns: precise line timing
> + * @linedur_ns: precise line timing
> * @pixeldur_ns: precise pixel timing
> * @helper_private: mid-layer private data
> * @properties: property tracking for this CRTC
> + * @acquire_ctx: per-CRTC implicit acquire context used by atomic drivers for
> + * legacy ioctls
> *
> * Each CRTC may have one or more connectors associated with it. This structure
> * allows the CRTC to be controlled.
> @@ -483,6 +489,7 @@ struct drm_encoder {
> * @connector_type_id: index into connector type enum
> * @interlace_allowed: can this connector handle interlaced modes?
> * @doublescan_allowed: can this connector handle doublescan?
> + * @stereo_allowed: can this connector handle stereo modes?
> * @modes: modes available on this connector (from fill_modes() + user)
> * @status: one of the drm_connector_status enums (connected, not, or unknown)
> * @probed_modes: list of modes derived directly from the display
> @@ -490,10 +497,13 @@ struct drm_encoder {
> * @funcs: connector control functions
> * @edid_blob_ptr: DRM property containing EDID if present
> * @properties: property tracking for this connector
> + * @path_blob_ptr: DRM blob property data for the DP MST path property
> * @polled: a %DRM_CONNECTOR_POLL_<foo> value for core driven polling
> * @dpms: current dpms state
> * @helper_private: mid-layer private data
> + * @cmdline_mode: mode line parsed from the kernel cmdline for this connector
> * @force: a %DRM_FORCE_<foo> state for forced mode sets
> + * @override_edid: has the EDID been overwritten through debugfs for testing?
> * @encoder_ids: valid encoders for this connector
> * @encoder: encoder driving this connector, if any
> * @eld: EDID-like data, if present
> @@ -503,6 +513,8 @@ struct drm_encoder {
> * @video_latency: video latency info from ELD, if found
> * @audio_latency: audio latency info from ELD, if found
> * @null_edid_counter: track sinks that give us all zeros for the EDID
> + * @bad_edid_counter: track sinks that give us an EDID with invalid checksum
> + * @debugfs_entry: debugfs directory for this connector
> *
> * Each connector may be connected to one or more CRTCs, or may be clonable by
> * another connector if they can share a CRTC. Each connector also has a specific
> @@ -570,6 +582,7 @@ struct drm_connector {
> * @update_plane: update the plane configuration
> * @disable_plane: shut down the plane
> * @destroy: clean up plane resources
> + * @reset: reset plane after state has been invalidated (e.g. resume)
> * @set_property: called when a property is changed
> */
> struct drm_plane_funcs {
> @@ -603,6 +616,8 @@ enum drm_plane_type {
> * @format_count: number of formats supported
> * @crtc: currently bound CRTC
> * @fb: currently bound fb
> + * @old_fb: Temporary tracking of the old fb while a modeset is ongoing. Used by
> + * drm_mode_set_config_internal() to implement correct refcounting.
> * @funcs: helper functions
> * @properties: property tracking for this plane
> * @type: type of plane (overlay, primary, cursor)
> @@ -620,8 +635,6 @@ struct drm_plane {
> struct drm_crtc *crtc;
> struct drm_framebuffer *fb;
>
> - /* Temporary tracking of the old fb while a modeset is ongoing. Used
> - * by drm_mode_set_config_internal to implement correct refcounting. */
> struct drm_framebuffer *old_fb;
>
> const struct drm_plane_funcs *funcs;
> @@ -680,7 +693,6 @@ struct drm_bridge {
>
> /**
> * struct drm_mode_set - new values for a CRTC config change
> - * @head: list management
> * @fb: framebuffer to use for new config
> * @crtc: CRTC whose configuration we're about to change
> * @mode: mode timings to use
> @@ -722,10 +734,11 @@ struct drm_mode_config_funcs {
> };
>
> /**
> - * drm_mode_group - group of mode setting resources for potential sub-grouping
> + * struct drm_mode_group - group of mode setting resources for potential sub-grouping
> * @num_crtcs: CRTC count
> * @num_encoders: encoder count
> * @num_connectors: connector count
> + * @num_bridges: bridge count
> * @id_list: list of KMS object IDs in this group
> *
> * Currently this simply tracks the global mode setting state. But in the
> @@ -745,10 +758,14 @@ struct drm_mode_group {
> };
>
> /**
> - * drm_mode_config - Mode configuration control structure
> + * struct drm_mode_config - Mode configuration control structure
> * @mutex: mutex protecting KMS related lists and structures
> + * @connection_mutex: ww mutex protecting connector state and routing
> + * @acquire_ctx: global implicit acquire context used by atomic drivers for
> + * legacy ioctls
> * @idr_mutex: mutex for KMS ID allocation and management
> * @crtc_idr: main KMS ID tracking object
> + * @fb_lock: mutex to protect fb state and lists
> * @num_fb: number of fbs available
> * @fb_list: list of framebuffers available
> * @num_connector: number of connectors on this device
> @@ -757,17 +774,28 @@ struct drm_mode_group {
> * @bridge_list: list of bridge objects
> * @num_encoder: number of encoders on this device
> * @encoder_list: list of encoder objects
> + * @num_overlay_plane: number of overlay planes on this device
> + * @num_total_plane: number of universal (i.e. with primary/curso) planes on this device
> + * @plane_list: list of plane objects
> * @num_crtc: number of CRTCs on this device
> * @crtc_list: list of CRTC objects
> + * @property_list: list of property objects
> * @min_width: minimum pixel width on this device
> * @min_height: minimum pixel height on this device
> * @max_width: maximum pixel width on this device
> * @max_height: maximum pixel height on this device
> * @funcs: core driver provided mode setting functions
> * @fb_base: base address of the framebuffer
> - * @poll_enabled: track polling status for this device
> + * @poll_enabled: track polling support for this device
> + * @poll_running: track polling status for this device
> * @output_poll_work: delayed work for polling in process context
> + * @property_blob_list: list of all the blob property objects
> * @*_property: core property tracking
> + * @preferred_depth: preferred RBG pixel depth, used by fb helpers
> + * @prefer_shadow: hint to userspace to prefer shadow-fb rendering
> + * @async_page_flip: does this device support async flips on the primary plane?
> + * @cursor_width: hint to userspace for max cursor width
> + * @cursor_height: hint to userspace for max cursor height
> *
> * Core mode resource tracking structure. All CRTC, encoders, and connectors
> * enumerated by the driver are added here, as are global properties. Some
> @@ -781,14 +809,7 @@ struct drm_mode_config {
> struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */
> /* this is limited to one for now */
>
> -
> - /**
> - * fb_lock - mutex to protect fb state
> - *
> - * Besides the global fb list his also protects the fbs list in the
> - * file_priv
> - */
> - struct mutex fb_lock;
> + struct mutex fb_lock; /* proctects global and per-file fb lists */
> int num_fb;
> struct list_head fb_list;
>
> --
> 2.1.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the dri-devel
mailing list