[PATCH v4 14/16] drm/dsi: Implement DCS set_{column, page}_address commands

[Thierry Reding]

From: Thierry Reding <treding at nvidia.com>

Provide small convenience wrappers to set the column and page extents of
the frame memory accessed by the host processors.

Signed-off-by: Thierry Reding <treding at nvidia.com>
---
 drivers/gpu/drm/drm_mipi_dsi.c | 46 ++++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_mipi_dsi.h     |  4 ++++
 2 files changed, 50 insertions(+)

diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
index 226822a44457..97dcbaa6a301 100644
--- a/drivers/gpu/drm/drm_mipi_dsi.c
+++ b/drivers/gpu/drm/drm_mipi_dsi.c
@@ -650,6 +650,52 @@ int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi)
 EXPORT_SYMBOL(mipi_dsi_dcs_set_display_on);
 
 /**
+ * mipi_dsi_dcs_set_column_address() - define the column extent of the frame
+ *    memory accessed by the host processor
+ * @dsi: DSI peripheral device
+ * @start: first column of frame memory
+ * @end: last column of frame memory
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
+				    u16 end)
+{
+	u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, payload,
+				 sizeof(payload));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+/**
+ * mipi_dsi_dcs_set_page_address() - define the page extent of the frame
+ *    memory accessed by the host processor
+ * @dsi: DSI peripheral device
+ * @start: first page of frame memory
+ * @end: last page of frame memory
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
+				  u16 end)
+{
+	u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PAGE_ADDRESS, payload,
+				 sizeof(payload));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+/**
  * mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect
  *    output signal on the TE signal line
  * @dsi: DSI peripheral device
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index 415d01f90086..6031593ee231 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -202,6 +202,10 @@ int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi);
 int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi);
 int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi);
 int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
+				    u16 end);
+int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
+				  u16 end);
 int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
 int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
 			     enum mipi_dsi_dcs_tear_mode mode);
-- 
2.1.2