[PATCH 0/2] make imx hdmi publicly used by dw hdmi compatible platform

[Kuankuan.Yang]

Hi Russell

I'm working on Designware hdmi-audio, also add it as a standard ALSA device.
Before I saw this email, I also planed to submit my patchs to upsteam.
I'm very grateful if you can email those patchs to us.

Best Regards.

于 2014年11月04日 22:29, Russell King - ARM Linux 写道:
> On Tue, Nov 04, 2014 at 09:33:10PM +0800, Andy Yan wrote:
>> From: Andy yan <andy.yan at rock-chips.com>
>>
>> We found freescale imx6 and rockchip rk3288 and Ingenic JZ4780 (Xburst/MIPS)
>> use the interface compatible Designware HDMI IP, but they also have some
>> lightly difference, such as phy pll configuration, register width(imx hdmi
>> register is one byte, but rk3288 is 4 bytes width and can only access by word),
>> 4K support(imx6 doesn't support 4k, but rk3288 does).
>>
>> To reuse the imx-hdmi driver, we do this patch set:
>> patch (1): split out imx-soc code from imx-hdmi to dw_hdmi-imx.c
>> patch (2): move imx-hdmi to bridge/, and rename to dw-hdmi to
>> make this driver indepent of drm-imx . And we will add rockchip
>> platform specific code dw_hdmi-rockchip.c later, this is depend
>> on drm-rockchip.
> Great - I fully agree that this needs to be renamed as it is a Designware
> IP.
>
> Should it be moved into bridge/ ?  It isn't implemented as a DRM bridge
> driver at present, so this seems illogical.  Is the longer term plan to
> convert it to be a DRM bridge?
>
> Secondly, if you want HDMI audio support, you may find the patches I
> maintain for the SolidRun devices useful, which add this as a standard
> ALSA device.  I also have CEC support for it as well.  If you're
> interested, I'll email those.
>