[PATCH 1/2] drm/msm: Initial add eDP support in msm drm driver
Hai Li
hali at codeaurora.org
Wed Nov 19 15:10:42 PST 2014
This change adds a new eDP connector in msm drm driver. With this
change, eDP panel can work with msm platform under drm framework.
Signed-off-by: Hai Li <hali at codeaurora.org>
---
drivers/gpu/drm/msm/Makefile | 6 +
drivers/gpu/drm/msm/edp/edp.c | 211 ++++
drivers/gpu/drm/msm/edp/edp.h | 83 ++
drivers/gpu/drm/msm/edp/edp_aux.c | 298 +++++
drivers/gpu/drm/msm/edp/edp_bridge.c | 206 ++++
drivers/gpu/drm/msm/edp/edp_connector.c | 155 +++
drivers/gpu/drm/msm/edp/edp_ctrl.c | 1799 +++++++++++++++++++++++++++++++
drivers/gpu/drm/msm/edp/edp_phy.c | 123 +++
drivers/gpu/drm/msm/edp/edp_reg.h | 92 ++
drivers/gpu/drm/msm/msm_drv.h | 6 +
10 files changed, 2979 insertions(+)
create mode 100644 drivers/gpu/drm/msm/edp/edp.c
create mode 100644 drivers/gpu/drm/msm/edp/edp.h
create mode 100644 drivers/gpu/drm/msm/edp/edp_aux.c
create mode 100644 drivers/gpu/drm/msm/edp/edp_bridge.c
create mode 100644 drivers/gpu/drm/msm/edp/edp_connector.c
create mode 100644 drivers/gpu/drm/msm/edp/edp_ctrl.c
create mode 100644 drivers/gpu/drm/msm/edp/edp_phy.c
create mode 100644 drivers/gpu/drm/msm/edp/edp_reg.h
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 143d988..e5464a0 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -16,6 +16,12 @@ msm-y := \
hdmi/hdmi_phy_8960.o \
hdmi/hdmi_phy_8x60.o \
hdmi/hdmi_phy_8x74.o \
+ edp/edp.o \
+ edp/edp_aux.o \
+ edp/edp_bridge.o \
+ edp/edp_connector.o \
+ edp/edp_ctrl.o \
+ edp/edp_phy.o \
mdp/mdp_format.o \
mdp/mdp_kms.o \
mdp/mdp4/mdp4_crtc.o \
diff --git a/drivers/gpu/drm/msm/edp/edp.c b/drivers/gpu/drm/msm/edp/edp.c
new file mode 100644
index 0000000..779706e
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp.c
@@ -0,0 +1,211 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_irq.h>
+#include "edp.h"
+
+static irqreturn_t edp_irq(int irq, void *dev_id)
+{
+ struct msm_edp *edp = dev_id;
+
+ /* Process eDP irq */
+ return msm_edp_ctrl_irq(edp->ctrl_priv);
+}
+
+static void edp_destroy(struct platform_device *pdev)
+{
+ struct msm_edp *edp = platform_get_drvdata(pdev);
+
+ if (!edp)
+ return;
+
+ if (edp->ctrl_priv) {
+ msm_edp_ctrl_destroy(edp->ctrl_priv);
+ edp->ctrl_priv = NULL;
+ }
+
+ platform_set_drvdata(pdev, NULL);
+
+ kfree(edp);
+}
+
+/* construct hdmi at bind/probe time, grab all the resources. */
+static struct msm_edp *edp_init(struct platform_device *pdev)
+{
+ struct msm_edp *edp = NULL;
+ int ret;
+
+ if (!pdev) {
+ pr_err("no edp device\n");
+ ret = -ENXIO;
+ goto fail;
+ }
+
+ edp = kzalloc(sizeof(*edp), GFP_KERNEL);
+ if (!edp) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ DBG("edp probed=%p", edp);
+
+ edp->pdev = pdev;
+ platform_set_drvdata(pdev, edp);
+
+ ret = msm_edp_ctrl_init(edp);
+ if (ret)
+ goto fail;
+
+ return edp;
+
+fail:
+ if (edp)
+ edp_destroy(pdev);
+
+ return ERR_PTR(ret);
+}
+
+static int edp_bind(struct device *dev, struct device *master, void *data)
+{
+ struct drm_device *drm = dev_get_drvdata(master);
+ struct msm_drm_private *priv = drm->dev_private;
+ struct msm_edp *edp;
+
+ DBG("");
+ edp = edp_init(to_platform_device(dev));
+ if (IS_ERR(edp))
+ return PTR_ERR(edp);
+ priv->edp = edp;
+
+ return 0;
+}
+
+static void edp_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct drm_device *drm = dev_get_drvdata(master);
+ struct msm_drm_private *priv = drm->dev_private;
+
+ DBG("");
+ if (priv->edp) {
+ edp_destroy(to_platform_device(dev));
+ priv->edp = NULL;
+ }
+}
+
+static const struct component_ops edp_ops = {
+ .bind = edp_bind,
+ .unbind = edp_unbind,
+};
+
+static int edp_dev_probe(struct platform_device *pdev)
+{
+ DBG("");
+ return component_add(&pdev->dev, &edp_ops);
+}
+
+static int edp_dev_remove(struct platform_device *pdev)
+{
+ DBG("");
+ component_del(&pdev->dev, &edp_ops);
+ return 0;
+}
+
+static const struct of_device_id dt_match[] = {
+ { .compatible = "qcom,mdss-edp" },
+ {}
+};
+
+static struct platform_driver edp_driver = {
+ .probe = edp_dev_probe,
+ .remove = edp_dev_remove,
+ .driver = {
+ .name = "msm_edp",
+ .of_match_table = dt_match,
+ },
+};
+
+void __init msm_edp_register(void)
+{
+ DBG("");
+ platform_driver_register(&edp_driver);
+}
+
+void __exit msm_edp_unregister(void)
+{
+ DBG("");
+ platform_driver_unregister(&edp_driver);
+}
+
+/* Second part of initialization, the drm/kms level modeset_init */
+int msm_edp_modeset_init(struct msm_edp *edp,
+ struct drm_device *dev, struct drm_encoder *encoder)
+{
+ struct platform_device *pdev = edp->pdev;
+ struct msm_drm_private *priv = dev->dev_private;
+ int ret;
+
+ edp->encoder = encoder;
+ edp->dev = dev;
+
+ edp->bridge = msm_edp_bridge_init(edp);
+ if (IS_ERR(edp->bridge)) {
+ ret = PTR_ERR(edp->bridge);
+ dev_err(dev->dev, "failed to create eDP bridge: %d\n", ret);
+ edp->bridge = NULL;
+ goto fail;
+ }
+
+ edp->connector = msm_edp_connector_init(edp);
+ if (IS_ERR(edp->connector)) {
+ ret = PTR_ERR(edp->connector);
+ dev_err(dev->dev, "failed to create eDP connector: %d\n", ret);
+ edp->connector = NULL;
+ goto fail;
+ }
+
+ edp->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ if (edp->irq < 0) {
+ ret = edp->irq;
+ dev_err(dev->dev, "failed to get irq: %d\n", ret);
+ goto fail;
+ }
+
+ ret = devm_request_irq(&pdev->dev, edp->irq,
+ edp_irq, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ "edp_isr", edp);
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to request IRQ%u: %d\n",
+ edp->irq, ret);
+ goto fail;
+ }
+
+ encoder->bridge = edp->bridge;
+
+ priv->bridges[priv->num_bridges++] = edp->bridge;
+ priv->connectors[priv->num_connectors++] = edp->connector;
+
+ return 0;
+
+fail:
+ /* bridge/connector are normally destroyed by drm */
+ if (edp->bridge) {
+ edp->bridge->funcs->destroy(edp->bridge);
+ edp->bridge = NULL;
+ }
+ if (edp->connector) {
+ edp->connector->funcs->destroy(edp->connector);
+ edp->connector = NULL;
+ }
+
+ return ret;
+}
diff --git a/drivers/gpu/drm/msm/edp/edp.h b/drivers/gpu/drm/msm/edp/edp.h
new file mode 100644
index 0000000..67954c7
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __EDP_CONNECTOR_H__
+#define __EDP_CONNECTOR_H__
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_gpio.h>
+#include <linux/pwm.h>
+#include <linux/i2c.h>
+#include <drm/drm_dp_helper.h>
+
+#include "drm_crtc.h"
+#include "msm_drv.h"
+
+#define edp_read(offset) msm_readl((offset))
+#define edp_write(offset, data) msm_writel((data), (offset))
+
+struct msm_edp {
+ struct drm_device *dev;
+ struct platform_device *pdev;
+
+ struct drm_connector *connector;
+ struct drm_bridge *bridge;
+
+ /* the encoder we are hooked to (outside of edp block) */
+ struct drm_encoder *encoder;
+
+ void *ctrl_priv;
+
+ int irq;
+};
+
+/* eDP bridge */
+struct drm_bridge *msm_edp_bridge_init(struct msm_edp *edp);
+
+/* eDP connector */
+struct drm_connector *msm_edp_connector_init(struct msm_edp *edp);
+
+/* AUX */
+void *msm_edp_aux_init(struct device *dev, void __iomem *regbase,
+ struct drm_dp_aux **drm_aux);
+void msm_edp_aux_destroy(void *edp_aux);
+irqreturn_t msm_edp_aux_irq(void *edp_aux, u32 isr);
+void msm_edp_aux_ctrl(void *edp_aux, int enable);
+
+/* Phy */
+bool msm_edp_phy_ready(void *edp_phy);
+void msm_edp_phy_ctrl(void *edp_phy, int enable);
+void msm_edp_phy_vm_pe_init(void *edp_phy);
+void msm_edp_phy_vm_pe_cfg(void *edp_phy, u32 v0, u32 v1);
+void msm_edp_phy_lane_power_ctrl(void *edp_phy, int up, int max_lane);
+void *msm_edp_phy_init(void __iomem *regbase);
+void msm_edp_phy_destroy(void *edp_phy);
+
+/* Ctrl */
+irqreturn_t msm_edp_ctrl_irq(void *edp_ctrl);
+int msm_edp_ctrl_set_backlight(void *edp_ctrl, u32 bl_level);
+void msm_edp_ctrl_power(void *edp_ctrl, bool on);
+int msm_edp_ctrl_init(struct msm_edp *edp);
+void msm_edp_ctrl_destroy(void *edp_ctrl);
+bool msm_edp_ctrl_panel_connected(void *edp_ctrl);
+int msm_edp_ctrl_get_edid(void *edp_ctrl,
+ struct drm_connector *connector, struct edid **edid);
+int msm_edp_ctrl_timing_cfg(void *edp_ctrl,
+ struct drm_display_mode *mode, struct drm_display_info *info);
+/* @pixel_rate is in kHz */
+bool msm_edp_ctrl_pixel_clock_valid(void *edp_ctrl,
+ u32 pixel_rate, u32 *pm, u32 *pn);
+
+#endif /* __EDP_CONNECTOR_H__ */
diff --git a/drivers/gpu/drm/msm/edp/edp_aux.c b/drivers/gpu/drm/msm/edp/edp_aux.c
new file mode 100644
index 0000000..11bcb86
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp_aux.c
@@ -0,0 +1,298 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/bug.h>
+
+#include "edp.h"
+#include "edp_reg.h"
+
+
+#define AUX_CMD_FIFO_LEN 144
+#define AUX_CMD_NATIVE_MAX 16
+#define AUX_CMD_I2C_MAX 128
+
+struct edp_aux {
+ void __iomem *base;
+ bool msg_err;
+
+ struct completion msg_comp;
+
+ /* To prevent the message transaction routine from reentry. */
+ struct mutex msg_mutex;
+
+ struct drm_dp_aux drm_aux;
+};
+#define to_edp_aux(x) container_of(x, struct edp_aux, drm_aux)
+
+static int edp_msg_fifo_tx(struct edp_aux *aux, struct drm_dp_aux_msg *msg)
+{
+ u32 data[4];
+ u32 reg, len;
+ bool native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
+ bool read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+ u8 *msgdata = msg->buffer;
+ int i;
+
+ if (read)
+ len = 4;
+ else
+ len = msg->size + 4;
+
+ /*
+ * cmd fifo only has depth of 144 bytes
+ */
+ if (len > AUX_CMD_FIFO_LEN)
+ return -EINVAL;
+
+ /* Pack cmd and write to HW */
+ data[0] = (msg->address >> 16) & 0xf; /* addr[19:16] */
+ if (read)
+ data[0] |= BIT(4); /* R/W */
+
+ data[1] = (msg->address >> 8) & 0xff; /* addr[15:8] */
+ data[2] = msg->address & 0xff; /* addr[7:0] */
+ data[3] = (msg->size - 1) & 0xff; /* len[7:0] */
+
+ for (i = 0; i < len; i++) {
+ reg = (i < 4) ? data[i] : msgdata[i - 4];
+ reg <<= 8;
+ reg &= 0x00ff00; /* index = 0, write */
+ if (i == 0)
+ reg |= BIT(31); /* INDEX_WRITE */
+ edp_write(aux->base + EDP_AUX_DATA, reg);
+
+ /* Write data 1 by 1 into the FIFO */
+ wmb();
+ }
+
+ reg = 0; /* Transaction number is always 1 */
+ if (!native) /* i2c */
+ reg |= BIT(8);
+
+ reg |= BIT(9); /* GO */
+ edp_write(aux->base + EDP_AUX_TRANS_CTRL, reg);
+
+ /* Make sure transaction is triggered */
+ wmb();
+
+ return 0;
+}
+
+static int edp_msg_fifo_rx(struct edp_aux *aux, struct drm_dp_aux_msg *msg)
+{
+ u32 data;
+ u8 *dp;
+ int i;
+ u32 len = msg->size;
+
+ data = 0; /* index = 0 */
+ data |= BIT(31); /* INDEX_WRITE */
+ data |= BIT(0); /* read */
+ edp_write(aux->base + EDP_AUX_DATA, data);
+
+ /* Make sure the FIFO is in read mode */
+ wmb();
+
+ dp = msg->buffer;
+
+ /* discard first byte */
+ data = edp_read(aux->base + EDP_AUX_DATA);
+ for (i = 0; i < len; i++) {
+ /* Read data 1 by 1 from the FIFO */
+ rmb();
+ data = edp_read(aux->base + EDP_AUX_DATA);
+ dp[i] = (u8)((data >> 8) & 0xff);
+ }
+
+ return 0;
+}
+
+/*
+ * This function does the real job to process an aux transaction.
+ * It will call msm_edp_aux_ctrl() function to reset the aux channel,
+ * if the waiting is timeout.
+ * The caller who triggers the transaction should avoid the
+ * msm_edp_aux_ctrl() running concurrently in other threads, i.e.
+ * start transaction only when aux channel is fully enabled.
+ */
+ssize_t edp_aux_transfer(struct drm_dp_aux *drm_aux, struct drm_dp_aux_msg *msg)
+{
+ struct edp_aux *aux = to_edp_aux(drm_aux);
+ ssize_t ret;
+ bool native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
+ bool read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+
+ /* Ignore address only message */
+ if ((msg->size == 0) || (msg->buffer == NULL)) {
+ msg->reply = native ?
+ DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
+ return msg->size;
+ }
+
+ /* msg sanity check */
+ if ((native && (msg->size > AUX_CMD_NATIVE_MAX)) ||
+ (msg->size > AUX_CMD_I2C_MAX)) {
+ pr_err("%s: invalid msg: size(%d), request(%x)\n",
+ __func__, msg->size, msg->request);
+ return -EINVAL;
+ }
+
+ mutex_lock(&aux->msg_mutex);
+
+ aux->msg_err = false;
+ reinit_completion(&aux->msg_comp);
+
+ ret = edp_msg_fifo_tx(aux, msg);
+ if (ret < 0)
+ goto unlock_exit;
+
+ DBG("wait_for_completion");
+ ret = wait_for_completion_timeout(&aux->msg_comp, 300);
+ if (ret <= 0) {
+ /*
+ * Clear GO and reset aux channel
+ * to cancel the current transaction.
+ */
+ edp_write(aux->base + EDP_AUX_TRANS_CTRL, 0);
+ msm_edp_aux_ctrl(aux, 1);
+ pr_err("%s: aux timeout, %d\n", __func__, ret);
+ goto unlock_exit;
+ }
+ DBG("completion");
+
+ if (!aux->msg_err) {
+ if (read) {
+ ret = edp_msg_fifo_rx(aux, msg);
+ if (ret < 0)
+ goto unlock_exit;
+ }
+
+ msg->reply = native ?
+ DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
+ } else {
+ /* Reply defer to retry */
+ msg->reply = native ?
+ DP_AUX_NATIVE_REPLY_DEFER : DP_AUX_I2C_REPLY_DEFER;
+ /*
+ * The sleep time in caller is not long enough to make sure
+ * our H/W completes transactions. Add more defer time here.
+ */
+ msleep(100);
+ }
+
+ /* Return requested size for success or retry */
+ ret = msg->size;
+
+unlock_exit:
+ mutex_unlock(&aux->msg_mutex);
+ return ret;
+}
+
+void *msm_edp_aux_init(struct device *dev, void __iomem *regbase,
+ struct drm_dp_aux **drm_aux)
+{
+ struct edp_aux *aux = NULL;
+ int ret;
+
+ DBG("");
+ aux = kzalloc(sizeof(*aux), GFP_KERNEL);
+ if (!aux)
+ return NULL;
+
+ aux->base = regbase;
+ mutex_init(&aux->msg_mutex);
+ init_completion(&aux->msg_comp);
+
+ aux->drm_aux.name = "msm_edp_aux";
+ aux->drm_aux.dev = dev;
+ aux->drm_aux.transfer = edp_aux_transfer;
+ ret = drm_dp_aux_register(&aux->drm_aux);
+ if (ret) {
+ pr_err("%s: failed to register drm aux: %d\n", __func__, ret);
+ mutex_destroy(&aux->msg_mutex);
+ kfree(aux);
+ aux = NULL;
+ }
+
+ if (drm_aux && aux)
+ *drm_aux = &aux->drm_aux;
+
+ return aux;
+}
+
+void msm_edp_aux_destroy(void *edp_aux)
+{
+ struct edp_aux *aux = edp_aux;
+
+ if (aux) {
+ drm_dp_aux_unregister(&aux->drm_aux);
+ mutex_destroy(&aux->msg_mutex);
+ kfree(aux);
+ }
+}
+
+irqreturn_t msm_edp_aux_irq(void *edp_aux, u32 isr)
+{
+ struct edp_aux *aux = edp_aux;
+
+ if (isr & EDP_INTR_TRANS_STATUS) {
+ DBG("isr=%x", isr);
+ edp_write(aux->base + EDP_AUX_TRANS_CTRL, 0);
+
+ if (isr & EDP_INTR_AUX_I2C_ERR)
+ aux->msg_err = true;
+ else
+ aux->msg_err = false;
+
+ complete(&aux->msg_comp);
+ }
+
+ return IRQ_HANDLED;
+}
+
+void msm_edp_aux_ctrl(void *edp_aux, int enable)
+{
+ struct edp_aux *aux = edp_aux;
+ u32 data;
+
+ DBG("enable=%d", enable);
+ data = edp_read(aux->base + EDP_AUX_CTRL);
+
+ if (enable) {
+ data |= BIT(1); /* Reset */
+ edp_write(aux->base + EDP_AUX_CTRL, data);
+ /* Make sure full reset */
+ wmb();
+ usleep_range(500, 1000);
+
+ data &= ~BIT(1); /* Clear Reset */
+ data |= BIT(0); /* Enable */
+ edp_write(aux->base + EDP_AUX_CTRL, data);
+ } else {
+ data &= ~BIT(0); /* Clear Enable */
+ edp_write(aux->base + EDP_AUX_CTRL, data);
+ }
+}
+
diff --git a/drivers/gpu/drm/msm/edp/edp_bridge.c b/drivers/gpu/drm/msm/edp/edp_bridge.c
new file mode 100644
index 0000000..6957bdd
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp_bridge.c
@@ -0,0 +1,206 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "edp.h"
+
+struct edp_bridge {
+ struct drm_bridge base;
+ struct msm_edp *edp;
+};
+#define to_edp_bridge(x) container_of(x, struct edp_bridge, base)
+
+static inline bool edp_bridge_helper_mode_match(
+ const struct list_head *modes,
+ const struct drm_display_mode *req_mode,
+ struct drm_display_mode **suggested_mode)
+{
+ struct drm_display_mode *m;
+
+ if (!modes || !req_mode || !suggested_mode)
+ return false;
+
+ /*
+ * Return suggested_mode as the matching mode if found,
+ * or the first good mode in the mode list if existed,
+ * or NULL
+ */
+ *suggested_mode = NULL;
+
+ list_for_each_entry(m, modes, head) {
+ if (m->status == MODE_OK) {
+ if (*suggested_mode == NULL)
+ *suggested_mode = m;
+
+ if ((m->hdisplay == req_mode->hdisplay) &&
+ (m->vdisplay == req_mode->vdisplay) &&
+ (m->htotal == req_mode->htotal) &&
+ (m->vtotal == req_mode->vtotal) &&
+ (m->clock == req_mode->clock)) {
+ *suggested_mode = m;
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+static void edp_bridge_destroy(struct drm_bridge *bridge)
+{
+ struct edp_bridge *edp_bridge = to_edp_bridge(bridge);
+
+ DBG("");
+ drm_bridge_cleanup(bridge);
+ kfree(edp_bridge);
+}
+
+static void edp_bridge_pre_enable(struct drm_bridge *bridge)
+{
+ struct edp_bridge *edp_bridge = to_edp_bridge(bridge);
+ struct msm_edp *edp = edp_bridge->edp;
+
+ DBG("");
+ msm_edp_ctrl_power(edp->ctrl_priv, true);
+}
+
+static void edp_bridge_enable(struct drm_bridge *bridge)
+{
+ DBG("");
+}
+
+static void edp_bridge_disable(struct drm_bridge *bridge)
+{
+ DBG("");
+}
+
+static void edp_bridge_post_disable(struct drm_bridge *bridge)
+{
+ struct edp_bridge *edp_bridge = to_edp_bridge(bridge);
+ struct msm_edp *edp = edp_bridge->edp;
+
+ DBG("");
+ msm_edp_ctrl_power(edp->ctrl_priv, false);
+}
+
+static void edp_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = bridge->dev;
+ struct drm_connector *connector;
+ struct edp_bridge *edp_bridge = to_edp_bridge(bridge);
+ struct msm_edp *edp = edp_bridge->edp;
+
+ DBG("set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
+ mode->base.id, mode->name,
+ mode->vrefresh, mode->clock,
+ mode->hdisplay, mode->hsync_start,
+ mode->hsync_end, mode->htotal,
+ mode->vdisplay, mode->vsync_start,
+ mode->vsync_end, mode->vtotal,
+ mode->type, mode->flags);
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ if ((connector->encoder != NULL) &&
+ (connector->encoder->bridge == bridge)) {
+ msm_edp_ctrl_timing_cfg(edp->ctrl_priv,
+ adjusted_mode, &connector->display_info);
+ break;
+ }
+ }
+}
+
+static bool edp_bridge_mode_fixup(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = bridge->dev;
+ struct drm_connector *connector;
+ struct list_head head;
+ struct drm_mode_object base;
+ struct drm_display_mode *suggested_mode = NULL;
+
+ DBG("");
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ if ((connector->encoder != NULL) &&
+ (connector->encoder->bridge == bridge)) {
+ if (edp_bridge_helper_mode_match(&connector->modes,
+ adjusted_mode,
+ &suggested_mode))
+ return true;
+
+ /*
+ * Can not find a matching mode.
+ * Copy the suggested mode if existed.
+ * Preserve display mode header while copying.
+ */
+ if (suggested_mode) {
+ head = adjusted_mode->head;
+ base = adjusted_mode->base;
+ memcpy(adjusted_mode,
+ suggested_mode,
+ sizeof(*suggested_mode));
+ adjusted_mode->head = head;
+ adjusted_mode->base = base;
+
+ return true;
+ }
+
+ break;
+ }
+ }
+
+ /* No matching connector, or suggested mode found */
+ return false;
+}
+
+static const struct drm_bridge_funcs edp_bridge_funcs = {
+ .pre_enable = edp_bridge_pre_enable,
+ .enable = edp_bridge_enable,
+ .disable = edp_bridge_disable,
+ .post_disable = edp_bridge_post_disable,
+ .mode_set = edp_bridge_mode_set,
+ .destroy = edp_bridge_destroy,
+ .mode_fixup = edp_bridge_mode_fixup,
+};
+
+/* initialize bridge */
+struct drm_bridge *msm_edp_bridge_init(struct msm_edp *edp)
+{
+ struct drm_bridge *bridge = NULL;
+ struct edp_bridge *edp_bridge;
+ int ret;
+
+ edp_bridge = kzalloc(sizeof(*edp_bridge), GFP_KERNEL);
+ if (!edp_bridge) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ edp_bridge->edp = edp;
+
+ bridge = &edp_bridge->base;
+
+ ret = drm_bridge_init(edp->dev, bridge, &edp_bridge_funcs);
+ if (ret)
+ goto fail;
+
+ return bridge;
+
+fail:
+ if (bridge)
+ edp_bridge_destroy(bridge);
+
+ return ERR_PTR(ret);
+}
diff --git a/drivers/gpu/drm/msm/edp/edp_connector.c b/drivers/gpu/drm/msm/edp/edp_connector.c
new file mode 100644
index 0000000..2935cd4
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp_connector.c
@@ -0,0 +1,155 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "drm/drm_edid.h"
+#include "msm_kms.h"
+#include "edp.h"
+
+struct edp_connector {
+ struct drm_connector base;
+ struct msm_edp *edp;
+};
+#define to_edp_connector(x) container_of(x, struct edp_connector, base)
+
+static enum drm_connector_status edp_connector_detect(
+ struct drm_connector *connector, bool force)
+{
+ struct edp_connector *edp_connector = to_edp_connector(connector);
+ struct msm_edp *edp = edp_connector->edp;
+
+ DBG("");
+ return msm_edp_ctrl_panel_connected(edp->ctrl_priv) ?
+ connector_status_connected : connector_status_disconnected;
+}
+
+static void edp_connector_destroy(struct drm_connector *connector)
+{
+ struct edp_connector *edp_connector = to_edp_connector(connector);
+
+ DBG("");
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+
+ kfree(edp_connector);
+}
+
+static int edp_connector_get_modes(struct drm_connector *connector)
+{
+ struct edp_connector *edp_connector = to_edp_connector(connector);
+ struct msm_edp *edp = edp_connector->edp;
+
+ struct edid *drm_edid = NULL;
+ int ret = 0;
+
+ DBG("");
+ ret = msm_edp_ctrl_get_edid(edp->ctrl_priv, connector, &drm_edid);
+ if (ret)
+ return ret;
+
+ if (drm_edid) {
+ drm_mode_connector_update_edid_property(connector, drm_edid);
+ ret = drm_add_edid_modes(connector, drm_edid);
+ }
+
+ return ret;
+}
+
+static int edp_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct edp_connector *edp_connector = to_edp_connector(connector);
+ struct msm_edp *edp = edp_connector->edp;
+ struct msm_drm_private *priv = connector->dev->dev_private;
+ struct msm_kms *kms = priv->kms;
+ long actual, requested;
+
+ requested = 1000 * mode->clock;
+ actual = kms->funcs->round_pixclk(kms,
+ requested, edp_connector->edp->encoder);
+
+ DBG("requested=%ld, actual=%ld", requested, actual);
+ if (actual != requested)
+ return MODE_CLOCK_RANGE;
+
+ if (!msm_edp_ctrl_pixel_clock_valid(
+ edp->ctrl_priv, mode->clock, NULL, NULL))
+ return MODE_CLOCK_RANGE;
+
+ return MODE_OK;
+}
+
+static struct drm_encoder *
+edp_connector_best_encoder(struct drm_connector *connector)
+{
+ struct edp_connector *edp_connector = to_edp_connector(connector);
+
+ DBG("");
+ return edp_connector->edp->encoder;
+}
+
+static const struct drm_connector_funcs edp_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .detect = edp_connector_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = edp_connector_destroy,
+};
+
+static const struct drm_connector_helper_funcs edp_connector_helper_funcs = {
+ .get_modes = edp_connector_get_modes,
+ .mode_valid = edp_connector_mode_valid,
+ .best_encoder = edp_connector_best_encoder,
+};
+
+/* initialize connector */
+struct drm_connector *msm_edp_connector_init(struct msm_edp *edp)
+{
+ struct drm_connector *connector = NULL;
+ struct edp_connector *edp_connector;
+ int ret;
+
+ edp_connector = kzalloc(sizeof(*edp_connector), GFP_KERNEL);
+ if (!edp_connector) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ edp_connector->edp = edp;
+
+ connector = &edp_connector->base;
+
+ ret = drm_connector_init(edp->dev, connector, &edp_connector_funcs,
+ DRM_MODE_CONNECTOR_eDP);
+ if (ret)
+ goto fail;
+
+ drm_connector_helper_add(connector, &edp_connector_helper_funcs);
+
+ /* We don't support HPD, so only poll status until connected. */
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+
+ /* Display driver doesn't support interlace now. */
+ connector->interlace_allowed = 0;
+ connector->doublescan_allowed = 0;
+
+ ret = drm_connector_register(connector);
+ if (ret)
+ goto fail;
+
+ return connector;
+
+fail:
+ if (connector)
+ edp_connector_destroy(connector);
+
+ return ERR_PTR(ret);
+}
diff --git a/drivers/gpu/drm/msm/edp/edp_ctrl.c b/drivers/gpu/drm/msm/edp/edp_ctrl.c
new file mode 100644
index 0000000..928cf58
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp_ctrl.c
@@ -0,0 +1,1799 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include "edp.h"
+#include "edp_reg.h"
+#include "drm_dp_helper.h"
+#include "drm_edid.h"
+#include "drm_crtc.h"
+
+#define VDDA_MIN_UV 1800000 /* uV units */
+#define VDDA_MAX_UV 1800000 /* uV units */
+#define VDDA_UA_ON_LOAD 100000 /* uA units */
+#define VDDA_UA_OFF_LOAD 100 /* uA units */
+
+#define RGB_COMPONENTS 3
+
+#define DPCD_LINK_VOLTAGE_MAX 4
+#define DPCD_LINK_PRE_EMPHASIS_MAX 4
+
+#define EDP_LINK_BW_MAX DP_LINK_BW_2_7
+
+/* Link training return value */
+#define EDP_TRAIN_FAIL -1
+#define EDP_TRAIN_SUCCESS 0
+#define EDP_TRAIN_RECONFIG 1
+
+#define EDP_CLK_MASK_AHB BIT(0)
+#define EDP_CLK_MASK_AUX BIT(1)
+#define EDP_CLK_MASK_LINK BIT(2)
+#define EDP_CLK_MASK_PIXEL BIT(3)
+#define EDP_CLK_MASK_MDP_CORE BIT(4)
+#define EDP_CLK_MASK_LINK_CHAN (EDP_CLK_MASK_LINK | EDP_CLK_MASK_PIXEL)
+#define EDP_CLK_MASK_AUX_CHAN \
+ (EDP_CLK_MASK_AHB | EDP_CLK_MASK_AUX | EDP_CLK_MASK_MDP_CORE)
+#define EDP_CLK_MASK_ALL (EDP_CLK_MASK_AUX_CHAN | EDP_CLK_MASK_LINK_CHAN)
+
+#define EDP_BACKLIGHT_MAX 255
+
+static int cont_splash; /* 1 to enable continuous splash screen */
+EXPORT_SYMBOL(cont_splash);
+
+module_param(cont_splash, int, 0);
+MODULE_PARM_DESC(cont_splash, "Enable continuous splash screen on eDP");
+
+struct edp_ctrl {
+ struct platform_device *pdev;
+
+ void __iomem *base;
+
+ /* regulators */
+ struct regulator *vdda_vreg;
+ struct regulator *lvl_reg;
+
+ /* clocks */
+ struct clk *aux_clk;
+ struct clk *pixel_clk;
+ struct clk *ahb_clk;
+ struct clk *link_clk;
+ struct clk *mdp_core_clk;
+
+ /* gpios */
+ int gpio_panel_en;
+ int gpio_panel_hpd;
+ int gpio_lvl_en;
+ int gpio_bkl_en;
+
+ /* backlight */
+ struct pwm_device *bl_pwm;
+ u32 pwm_period;
+ u32 bl_level;
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+ struct backlight_device *backlight_dev;
+#endif
+
+ /* completion and mutex */
+ struct completion idle_comp;
+ struct mutex dev_mutex; /* To protect device power status */
+ struct mutex bl_mutex; /* To protect bl_level and pwm status */
+
+ /* work queue */
+ struct work_struct on_work;
+ struct work_struct off_work;
+ struct workqueue_struct *workqueue;
+
+ /* Interrupt register lock */
+ spinlock_t irq_lock;
+
+ int cont_splash;
+ bool edp_connected;
+ bool power_on;
+
+ /* edid raw data */
+ struct edid *edid;
+
+ struct drm_dp_link dp_link;
+ struct drm_dp_aux *drm_aux;
+
+ /* dpcd raw data */
+ u8 dpcd[DP_RECEIVER_CAP_SIZE];
+
+ /* Link status */
+ u8 link_rate;
+ u8 lane_cnt;
+ u8 v_level;
+ u8 p_level;
+
+ /* Timing status */
+ u8 interlaced;
+ u32 pixel_rate; /* in kHz */
+ u32 color_depth;
+
+ void *aux_priv;
+ void *phy_priv;
+};
+
+struct edp_pixel_clk_div {
+ u32 rate; /* in kHz */
+ u32 m;
+ u32 n;
+};
+
+#define EDP_PIXEL_CLK_NUM 8
+static const struct edp_pixel_clk_div clk_divs[2][EDP_PIXEL_CLK_NUM] = {
+ { /* Link clock = 162MHz, source clock = 810MHz */
+ {119000, 31, 211}, /* WSXGA+ 1680x1050 at 60Hz CVT */
+ {130250, 32, 199}, /* UXGA 1600x1200 at 60Hz CVT */
+ {148500, 11, 60}, /* FHD 1920x1080 at 60Hz */
+ {154000, 50, 263}, /* WUXGA 1920x1200 at 60Hz CVT */
+ {209250, 31, 120}, /* QXGA 2048x1536 at 60Hz CVT */
+ {268500, 119, 359}, /* WQXGA 2560x1600 at 60Hz CVT */
+ {138530, 33, 193}, /* AUO B116HAN03.0 Panel */
+ {141400, 48, 275}, /* AUO B133HTN01.2 Panel */
+ },
+ { /* Link clock = 270MHz, source clock = 675MHz */
+ {119000, 52, 295}, /* WSXGA+ 1680x1050 at 60Hz CVT */
+ {130250, 11, 57}, /* UXGA 1600x1200 at 60Hz CVT */
+ {148500, 11, 50}, /* FHD 1920x1080 at 60Hz */
+ {154000, 47, 206}, /* WUXGA 1920x1200 at 60Hz CVT */
+ {209250, 31, 100}, /* QXGA 2048x1536 at 60Hz CVT */
+ {268500, 107, 269}, /* WQXGA 2560x1600 at 60Hz CVT */
+ {138530, 63, 307}, /* AUO B116HAN03.0 Panel */
+ {141400, 53, 253}, /* AUO B133HTN01.2 Panel */
+ },
+};
+
+static void edp_clk_deinit(struct edp_ctrl *ctrl)
+{
+ if (ctrl->aux_clk)
+ clk_put(ctrl->aux_clk);
+ if (ctrl->pixel_clk)
+ clk_put(ctrl->pixel_clk);
+ if (ctrl->ahb_clk)
+ clk_put(ctrl->ahb_clk);
+ if (ctrl->link_clk)
+ clk_put(ctrl->link_clk);
+ if (ctrl->mdp_core_clk)
+ clk_put(ctrl->mdp_core_clk);
+}
+
+static int edp_clk_init(struct edp_ctrl *ctrl)
+{
+ struct device *dev = &ctrl->pdev->dev;
+
+ ctrl->aux_clk = clk_get(dev, "core_clk");
+ if (IS_ERR(ctrl->aux_clk)) {
+ pr_err("%s: Can't find aux_clk", __func__);
+ ctrl->aux_clk = NULL;
+ goto edp_clk_err;
+ }
+
+ ctrl->pixel_clk = clk_get(dev, "pixel_clk");
+ if (IS_ERR(ctrl->pixel_clk)) {
+ pr_err("%s: Can't find pixel_clk", __func__);
+ ctrl->pixel_clk = NULL;
+ goto edp_clk_err;
+ }
+
+ ctrl->ahb_clk = clk_get(dev, "iface_clk");
+ if (IS_ERR(ctrl->ahb_clk)) {
+ pr_err("%s: Can't find ahb_clk", __func__);
+ ctrl->ahb_clk = NULL;
+ goto edp_clk_err;
+ }
+
+ ctrl->link_clk = clk_get(dev, "link_clk");
+ if (IS_ERR(ctrl->link_clk)) {
+ pr_err("%s: Can't find link_clk", __func__);
+ ctrl->link_clk = NULL;
+ goto edp_clk_err;
+ }
+
+ /* need mdss clock to receive irq */
+ ctrl->mdp_core_clk = clk_get(dev, "mdp_core_clk");
+ if (IS_ERR(ctrl->mdp_core_clk)) {
+ pr_err("%s: Can't find mdp_core_clk", __func__);
+ ctrl->mdp_core_clk = NULL;
+ goto edp_clk_err;
+ }
+
+ return 0;
+
+edp_clk_err:
+ edp_clk_deinit(ctrl);
+ return -EPERM;
+}
+
+static int edp_clk_enable(struct edp_ctrl *ctrl, u32 clk_mask)
+{
+ int ret = 0;
+
+ DBG("mask=%x", clk_mask);
+ /* ahb_clk should be enabled first */
+ if (clk_mask & EDP_CLK_MASK_AHB) {
+ ret = clk_prepare_enable(ctrl->ahb_clk);
+ if (ret) {
+ pr_err("%s: Failed to enable ahb clk\n", __func__);
+ goto f0;
+ }
+ }
+ if (clk_mask & EDP_CLK_MASK_AUX) {
+ ret = clk_set_rate(ctrl->aux_clk, 19200000);
+ if (ret) {
+ pr_err("%s: Failed to set rate aux clk\n", __func__);
+ goto f1;
+ }
+ ret = clk_prepare_enable(ctrl->aux_clk);
+ if (ret) {
+ pr_err("%s: Failed to enable aux clk\n", __func__);
+ goto f1;
+ }
+ }
+ /* Need to set rate and enable link_clk prior to pixel_clk */
+ if (clk_mask & EDP_CLK_MASK_LINK) {
+ DBG("edp->link_clk, set_rate %ld",
+ (unsigned long)ctrl->link_rate * 27000000);
+ ret = clk_set_rate(ctrl->link_clk,
+ (unsigned long)ctrl->link_rate * 27000000);
+ if (ret) {
+ pr_err("%s: Failed to set rate to link clk\n",
+ __func__);
+ goto f2;
+ }
+
+ ret = clk_prepare_enable(ctrl->link_clk);
+ if (ret) {
+ pr_err("%s: Failed to enable link clk\n", __func__);
+ goto f2;
+ }
+ }
+ if (clk_mask & EDP_CLK_MASK_PIXEL) {
+ DBG("edp->pixel_clk, set_rate %ld",
+ (unsigned long)ctrl->pixel_rate * 1000);
+ ret = clk_set_rate(ctrl->pixel_clk,
+ (unsigned long)ctrl->pixel_rate * 1000);
+ if (ret) {
+ pr_err("%s: Failed to set rate to pixel clk\n",
+ __func__);
+ goto f3;
+ }
+
+ ret = clk_prepare_enable(ctrl->pixel_clk);
+ if (ret) {
+ pr_err("%s: Failed to enable pixel clk\n", __func__);
+ goto f3;
+ }
+ }
+ if (clk_mask & EDP_CLK_MASK_MDP_CORE) {
+ ret = clk_prepare_enable(ctrl->mdp_core_clk);
+ if (ret) {
+ pr_err("%s: Failed to enable mdp core clk\n", __func__);
+ goto f4;
+ }
+ }
+
+ return 0;
+
+f4:
+ if (clk_mask & EDP_CLK_MASK_PIXEL)
+ clk_disable_unprepare(ctrl->pixel_clk);
+f3:
+ if (clk_mask & EDP_CLK_MASK_LINK)
+ clk_disable_unprepare(ctrl->link_clk);
+f2:
+ if (clk_mask & EDP_CLK_MASK_AUX)
+ clk_disable_unprepare(ctrl->aux_clk);
+f1:
+ if (clk_mask & EDP_CLK_MASK_AHB)
+ clk_disable_unprepare(ctrl->ahb_clk);
+f0:
+ return ret;
+}
+
+static void edp_clk_disable(struct edp_ctrl *ctrl, u32 clk_mask)
+{
+ if (clk_mask & EDP_CLK_MASK_MDP_CORE)
+ clk_disable_unprepare(ctrl->mdp_core_clk);
+ if (clk_mask & EDP_CLK_MASK_PIXEL)
+ clk_disable_unprepare(ctrl->pixel_clk);
+ if (clk_mask & EDP_CLK_MASK_LINK)
+ clk_disable_unprepare(ctrl->link_clk);
+ if (clk_mask & EDP_CLK_MASK_AUX)
+ clk_disable_unprepare(ctrl->aux_clk);
+ if (clk_mask & EDP_CLK_MASK_AHB)
+ clk_disable_unprepare(ctrl->ahb_clk);
+}
+
+static void edp_regulator_deinit(struct edp_ctrl *ctrl)
+{
+ if (ctrl->vdda_vreg) {
+ regulator_disable(ctrl->vdda_vreg);
+ regulator_set_optimum_mode(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD);
+ devm_regulator_put(ctrl->vdda_vreg);
+ ctrl->vdda_vreg = NULL;
+ }
+}
+
+static int edp_regulator_init(struct edp_ctrl *ctrl)
+{
+ struct device *dev = &ctrl->pdev->dev;
+ int ret;
+
+ DBG("");
+ ctrl->vdda_vreg = devm_regulator_get(dev, "vdda");
+ if (IS_ERR(ctrl->vdda_vreg)) {
+ pr_err("%s: Could not get vdda reg, ret = %ld\n", __func__,
+ PTR_ERR(ctrl->vdda_vreg));
+ ctrl->vdda_vreg = NULL;
+ ret = -ENODEV;
+ goto f0;
+ }
+
+ ret = regulator_set_voltage(ctrl->vdda_vreg, VDDA_MIN_UV, VDDA_MAX_UV);
+ if (ret) {
+ pr_err("%s:vdda_vreg set_voltage failed, %d\n", __func__, ret);
+ goto f1;
+ }
+
+ ret = regulator_set_optimum_mode(ctrl->vdda_vreg, VDDA_UA_ON_LOAD);
+ if (ret < 0) {
+ pr_err("%s: vdda_vreg set regulator mode failed.\n", __func__);
+ goto f1;
+ }
+
+ ret = regulator_enable(ctrl->vdda_vreg);
+ if (ret) {
+ pr_err("%s: Failed to enable vdda_vreg regulator.\n", __func__);
+ goto f2;
+ }
+
+ DBG("exit");
+ return 0;
+
+f2:
+ regulator_set_optimum_mode(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD);
+f1:
+ devm_regulator_put(ctrl->vdda_vreg);
+ ctrl->vdda_vreg = NULL;
+f0:
+ return ret;
+}
+
+static int edp_gpio_config(struct edp_ctrl *ctrl, bool on)
+{
+ struct device *dev = &ctrl->pdev->dev;
+ int ret, enable;
+
+ if (on) {
+ if (ctrl->cont_splash)
+ enable = 1;
+ else
+ enable = 0;
+
+ ctrl->gpio_panel_hpd = of_get_named_gpio(
+ dev->of_node, "panel-hpd-gpio", 0);
+
+ if (!gpio_is_valid(ctrl->gpio_panel_hpd)) {
+ pr_err("%s gpio_panel_hpd %d is not valid ", __func__,
+ ctrl->gpio_panel_hpd);
+ ret = -ENODEV;
+ goto f0;
+ }
+
+ ret = gpio_request(ctrl->gpio_panel_hpd, "edp_hpd_irq_gpio");
+ if (ret) {
+ pr_err("%s unable to request gpio_panel_hpd %d",
+ __func__, ctrl->gpio_panel_hpd);
+ goto f0;
+ }
+
+ ret = gpio_direction_input(ctrl->gpio_panel_hpd);
+ if (ret) {
+ pr_err("%s: Set direction for hpd failed, ret = %d\n",
+ __func__, ctrl->gpio_panel_hpd);
+ goto f1;
+ }
+
+ ctrl->gpio_panel_en = of_get_named_gpio(dev->of_node,
+ "panel-en-gpio", 0);
+ if (!gpio_is_valid(ctrl->gpio_panel_en)) {
+ pr_err("%s: gpio_panel_en=%d not specified\n", __func__,
+ ctrl->gpio_panel_en);
+ ret = -ENODEV;
+ goto f2;
+ }
+
+ ret = gpio_request(ctrl->gpio_panel_en, "disp_enable");
+ if (ret) {
+ pr_err("%s: Request gpio_panel_en failed, ret=%d\n",
+ __func__, ret);
+ goto f2;
+ }
+
+ ret = gpio_direction_output(ctrl->gpio_panel_en, enable);
+ if (ret) {
+ pr_err("%s: Set direction for panel_en failed, %d\n",
+ __func__, ret);
+ goto f3;
+ }
+
+ ctrl->gpio_bkl_en = of_get_named_gpio(dev->of_node,
+ "backlight-en-gpio", 0);
+ if (!gpio_is_valid(ctrl->gpio_bkl_en)) {
+ pr_err("%s: gpio_bkl_en=%d not specified\n", __func__,
+ ctrl->gpio_bkl_en);
+ ret = -ENODEV;
+ goto f4;
+ }
+
+ ret = gpio_request(ctrl->gpio_bkl_en, "edp_bkl_enable");
+ if (ret) {
+ pr_err("%s: Request reset gpio_bkl_en failed, ret=%d\n",
+ __func__, ret);
+ goto f4;
+ }
+
+ ret = gpio_direction_output(ctrl->gpio_bkl_en, enable);
+ if (ret) {
+ pr_err("%s: Set direction for bkl_en failed, %d\n",
+ __func__, ret);
+ goto f5;
+ }
+
+ DBG("gpio on");
+ } else {
+ if (gpio_is_valid(ctrl->gpio_bkl_en)) {
+ gpio_free(ctrl->gpio_bkl_en);
+ ctrl->gpio_bkl_en = -1;
+ }
+ if (gpio_is_valid(ctrl->gpio_panel_hpd)) {
+ gpio_free(ctrl->gpio_panel_hpd);
+ ctrl->gpio_panel_hpd = -1;
+ }
+ if (gpio_is_valid(ctrl->gpio_panel_en)) {
+ gpio_free(ctrl->gpio_panel_en);
+ ctrl->gpio_panel_en = -1;
+ }
+ DBG("gpio off");
+ }
+
+ return 0;
+
+f5:
+ gpio_free(ctrl->gpio_bkl_en);
+f4:
+ ctrl->gpio_bkl_en = -1;
+ gpio_set_value(ctrl->gpio_panel_en, 0);
+f3:
+ gpio_free(ctrl->gpio_panel_en);
+f2:
+ ctrl->gpio_panel_en = -1;
+f1:
+ gpio_free(ctrl->gpio_panel_hpd);
+f0:
+ ctrl->gpio_panel_hpd = -1;
+
+ return ret;
+}
+
+static int edp_pwm_config(struct edp_ctrl *ctrl, bool on)
+{
+ struct device *dev = &ctrl->pdev->dev;
+ int ret = 0;
+ u32 lpg_channel;
+
+ if (!on) {
+ if (ctrl->bl_pwm) {
+ pwm_free(ctrl->bl_pwm);
+ ctrl->bl_pwm = NULL;
+ }
+ return 0;
+ }
+
+ ret = of_property_read_u32(dev->of_node,
+ "qcom,panel-lpg-channel", &lpg_channel);
+ if (ret) {
+ pr_err("%s: panel lpg channel is not specified, %d", __func__,
+ lpg_channel);
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32(dev->of_node,
+ "qcom,panel-pwm-period", &ctrl->pwm_period);
+ if (ret) {
+ pr_err("%s: panel pwm period is not specified, %d", __func__,
+ ctrl->pwm_period);
+ ctrl->pwm_period = -EINVAL;
+ return -EINVAL;
+ }
+
+ ctrl->bl_pwm = pwm_request(lpg_channel, "lcd-backlight");
+ if (ctrl->bl_pwm == NULL || IS_ERR(ctrl->bl_pwm)) {
+ pr_err("%s: pwm request failed", __func__);
+ ctrl->bl_pwm = NULL;
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/* The power source of the level translation chip is different on different
+ * target boards, i.e. a gpio or a regulator.
+ */
+static int edp_level_trans_enable(struct edp_ctrl *ctrl)
+{
+ struct device *dev = &ctrl->pdev->dev;
+ int ret = 0;
+
+ ctrl->gpio_lvl_en = of_get_named_gpio(dev->of_node,
+ "lvl-en-gpio", 0);
+ if (!gpio_is_valid(ctrl->gpio_lvl_en)) {
+ DBG("gpio_lvl_en=%d not specified, try regulator",
+ ctrl->gpio_lvl_en);
+ ctrl->gpio_lvl_en = -1;
+ goto lvl_reg_enable;
+ }
+ ret = gpio_request(ctrl->gpio_lvl_en, "edp_lvl_enable");
+ if (ret) {
+ DBG("Request gpio_lvl_en failed, %d, try regulator", ret);
+ ctrl->gpio_lvl_en = -1;
+ goto lvl_reg_enable;
+ }
+ ret = gpio_direction_output(ctrl->gpio_lvl_en, 1);
+ if (ret) {
+ DBG("Set dir for lvl_en failed, %d, try regulator", ret);
+ gpio_free(ctrl->gpio_lvl_en);
+ ctrl->gpio_lvl_en = -1;
+ }
+ DBG("gpio_lvl is enabled");
+
+lvl_reg_enable:
+ ctrl->lvl_reg = devm_regulator_get(dev, "lvl-vdd");
+ if (IS_ERR(ctrl->lvl_reg)) {
+ DBG("Could not get lvl-vdd reg, %ld",
+ PTR_ERR(ctrl->vdda_vreg));
+ ctrl->lvl_reg = NULL;
+ goto exit;
+ }
+ ret = regulator_enable(ctrl->lvl_reg);
+ if (ret) {
+ DBG("Failed to enable lvl-vdd reg regulator, %d", ret);
+ devm_regulator_put(ctrl->lvl_reg);
+ ctrl->lvl_reg = NULL;
+ }
+ DBG("lvl regulator is enabled");
+
+exit:
+ if (ctrl->lvl_reg && gpio_is_valid(ctrl->gpio_lvl_en))
+ pr_warn("%s: both gpio and regulator are enabled\n", __func__);
+ else if (!ctrl->lvl_reg && !gpio_is_valid(ctrl->gpio_lvl_en))
+ pr_warn("%s: nothing is enabled\n", __func__);
+
+ return 0;
+}
+
+static void edp_level_trans_disable(struct edp_ctrl *ctrl)
+{
+ if (ctrl->lvl_reg) {
+ regulator_disable(ctrl->lvl_reg);
+ devm_regulator_put(ctrl->lvl_reg);
+ ctrl->lvl_reg = NULL;
+ }
+ if (gpio_is_valid(ctrl->gpio_lvl_en)) {
+ gpio_set_value(ctrl->gpio_lvl_en, 0);
+ gpio_free(ctrl->gpio_lvl_en);
+ ctrl->gpio_lvl_en = -1;
+ }
+}
+
+static void edp_ctrl_irq_enable(struct edp_ctrl *ctrl, int enable)
+{
+ unsigned long flags;
+
+ DBG("%d", enable);
+ spin_lock_irqsave(&ctrl->irq_lock, flags);
+ if (enable) {
+ edp_write(ctrl->base + EDP_INTERRUPT_REG_1, EDP_INTR_MASK1);
+ edp_write(ctrl->base + EDP_INTERRUPT_REG_2, EDP_INTR_MASK2);
+ } else {
+ edp_write(ctrl->base + EDP_INTERRUPT_REG_1, 0x0);
+ edp_write(ctrl->base + EDP_INTERRUPT_REG_2, 0x0);
+ }
+ spin_unlock_irqrestore(&ctrl->irq_lock, flags);
+ DBG("exit");
+}
+
+static void edp_fill_link_cfg(struct edp_ctrl *ctrl)
+{
+ u32 prate;
+ u32 lrate;
+ u32 bpp;
+ u8 max_lane = ctrl->dp_link.num_lanes;
+ u8 lane;
+
+ prate = ctrl->pixel_rate;
+ bpp = ctrl->color_depth * RGB_COMPONENTS;
+
+ /*
+ * By default, use the maximum link rate and minimum lane count,
+ * so that we can do rate down shift during link training.
+ */
+ ctrl->link_rate = drm_dp_link_rate_to_bw_code(ctrl->dp_link.rate);
+
+ prate *= bpp;
+ prate /= 8; /* in kByte */
+
+ lrate = 270000; /* in kHz */
+ lrate *= ctrl->link_rate;
+ lrate /= 10; /* in kByte, 10 bits --> 8 bits */
+
+ for (lane = 1; lane <= max_lane; lane <<= 1) {
+ if (lrate >= prate)
+ break;
+ lrate <<= 1;
+ }
+
+ ctrl->lane_cnt = lane;
+ DBG("rate=%d lane=%d", ctrl->link_rate, ctrl->lane_cnt);
+}
+
+static int edp_sink_power_state(struct edp_ctrl *ctrl, u8 state)
+{
+ u8 s = state;
+
+ DBG("%d", s);
+
+ if (ctrl->dp_link.revision < 0x11)
+ return 0;
+
+ if (drm_dp_dpcd_write(ctrl->drm_aux, DP_SET_POWER, &s, 1) < 1) {
+ pr_err("%s: Set power state to panel failed\n", __func__);
+ return -ENOLINK;
+ }
+
+ return 0;
+}
+
+static void edp_config_ctrl(struct edp_ctrl *ctrl)
+{
+ u32 data = 0;
+
+ data = ctrl->lane_cnt - 1;
+ data <<= 4;
+
+ if (ctrl->dp_link.capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
+ data |= 0x40;
+
+ if (ctrl->color_depth == 8)
+ data |= 0x100; /* 0 == 6 bits, 1 == 8 bits */
+
+ if (!ctrl->interlaced) /* progressive */
+ data |= 0x04;
+
+ data |= 0x03; /* sycn clock & static Mvid */
+
+ edp_write(ctrl->base + EDP_CONFIGURATION_CTRL, data);
+}
+
+static void edp_state_ctrl(struct edp_ctrl *ctrl, u32 state)
+{
+ edp_write(ctrl->base + EDP_STATE_CTRL, state);
+ /* Make sure H/W status is set */
+ wmb();
+}
+
+static int edp_lane_set_write(struct edp_ctrl *ctrl,
+ u8 voltage_level, u8 pre_emphasis_level)
+{
+ int i;
+ u8 buf[4];
+
+ if (voltage_level >= DPCD_LINK_VOLTAGE_MAX)
+ voltage_level |= 0x04;
+
+ if (pre_emphasis_level >= DPCD_LINK_PRE_EMPHASIS_MAX)
+ pre_emphasis_level |= 0x04;
+
+ pre_emphasis_level <<= 3;
+
+ for (i = 0; i < 4; i++)
+ buf[i] = voltage_level | pre_emphasis_level;
+
+ DBG("%s: p|v=0x%x", __func__, voltage_level | pre_emphasis_level);
+ if (drm_dp_dpcd_write(ctrl->drm_aux, 0x103, buf, 4) < 4) {
+ pr_err("%s: Set sw/pe to panel failed\n", __func__);
+ return -ENOLINK;
+ }
+
+ return 0;
+}
+
+static int edp_train_pattern_set_write(struct edp_ctrl *ctrl, u8 pattern)
+{
+ u8 p = pattern;
+
+ DBG("pattern=%x", p);
+ if (drm_dp_dpcd_write(ctrl->drm_aux, 0x102, &p, 1) < 1) {
+ pr_err("%s: Set training pattern to panel failed\n", __func__);
+ return -ENOLINK;
+ }
+
+ return 0;
+}
+
+static void edp_sink_train_set_adjust(struct edp_ctrl *ctrl,
+ const u8 *link_status)
+{
+ int i;
+ u8 max = 0;
+ u8 data;
+
+ /* use the max level across lanes */
+ for (i = 0; i < ctrl->lane_cnt; i++) {
+ data = drm_dp_get_adjust_request_voltage(link_status, i);
+ DBG("lane=%d req_voltage_swing=0x%x", i, data);
+ if (max < data)
+ max = data;
+ }
+
+ ctrl->v_level = max >> DP_TRAIN_VOLTAGE_SWING_SHIFT;
+
+ /* use the max level across lanes */
+ max = 0;
+ for (i = 0; i < ctrl->lane_cnt; i++) {
+ data = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
+ DBG("lane=%d req_pre_emphasis=0x%x", i, data);
+ if (max < data)
+ max = data;
+ }
+
+ ctrl->p_level = max >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
+ DBG("v_level=%d, p_level=%d", ctrl->v_level, ctrl->p_level);
+}
+
+static void edp_host_train_set(struct edp_ctrl *ctrl, u32 train)
+{
+ int cnt;
+ u32 data;
+ u32 bit;
+
+ bit = 1;
+ bit <<= (train - 1);
+ DBG("%s: bit=%d train=%d", __func__, bit, train);
+
+ edp_state_ctrl(ctrl, bit);
+ bit = 8;
+ bit <<= (train - 1);
+ cnt = 10;
+ while (cnt--) {
+ data = edp_read(ctrl->base + EDP_MAINLINK_READY);
+ if (data & bit)
+ break;
+ }
+
+ if (cnt == 0)
+ pr_err("%s: set link_train=%d failed\n", __func__, train);
+}
+
+static const u8 vm_pre_emphasis[4][4] = {
+ {0x03, 0x06, 0x09, 0x0C}, /* pe0, 0 db */
+ {0x03, 0x06, 0x09, 0xFF}, /* pe1, 3.5 db */
+ {0x03, 0x06, 0xFF, 0xFF}, /* pe2, 6.0 db */
+ {0x03, 0xFF, 0xFF, 0xFF} /* pe3, 9.5 db */
+};
+
+/* voltage swing, 0.2v and 1.0v are not support */
+static const u8 vm_voltage_swing[4][4] = {
+ {0x14, 0x18, 0x1A, 0x1E}, /* sw0, 0.4v */
+ {0x18, 0x1A, 0x1E, 0xFF}, /* sw1, 0.6 v */
+ {0x1A, 0x1E, 0xFF, 0xFF}, /* sw1, 0.8 v */
+ {0x1E, 0xFF, 0xFF, 0xFF} /* sw1, 1.2 v, optional */
+};
+
+static int edp_voltage_pre_emphasise_set(struct edp_ctrl *ctrl)
+{
+ u32 value0;
+ u32 value1;
+
+ DBG("v=%d p=%d", ctrl->v_level, ctrl->p_level);
+
+ value0 = vm_pre_emphasis[(int)(ctrl->v_level)][(int)(ctrl->p_level)];
+ value1 = vm_voltage_swing[(int)(ctrl->v_level)][(int)(ctrl->p_level)];
+
+ /* Configure host and panel only if both values are allowed */
+ if (value0 != 0xFF && value1 != 0xFF) {
+ msm_edp_phy_vm_pe_cfg(ctrl->phy_priv, value0, value1);
+ return edp_lane_set_write(ctrl, ctrl->v_level, ctrl->p_level);
+ }
+
+ return -EINVAL;
+}
+
+static int edp_start_link_train_1(struct edp_ctrl *ctrl)
+{
+ u8 link_status[DP_LINK_STATUS_SIZE];
+ u8 old_v_level;
+ int tries;
+ int ret = 0;
+ int rlen;
+
+ DBG("");
+
+ edp_host_train_set(ctrl, 0x01); /* train_1 */
+ ret = edp_voltage_pre_emphasise_set(ctrl);
+ if (ret)
+ return ret;
+ ret = edp_train_pattern_set_write(ctrl, 0x21); /* train_1 */
+ if (ret)
+ return ret;
+
+ tries = 0;
+ old_v_level = ctrl->v_level;
+ while (1) {
+ drm_dp_link_train_clock_recovery_delay(ctrl->dpcd);
+
+ rlen = drm_dp_dpcd_read_link_status(ctrl->drm_aux, link_status);
+ if (rlen < DP_LINK_STATUS_SIZE) {
+ pr_err("%s: read link status failed\n", __func__);
+ return -ENOLINK;
+ }
+ if (drm_dp_clock_recovery_ok(link_status, ctrl->lane_cnt)) {
+ ret = 0;
+ break;
+ }
+
+ if (ctrl->v_level == DPCD_LINK_VOLTAGE_MAX) {
+ ret = -1;
+ break; /* quit */
+ }
+
+ if (old_v_level == ctrl->v_level) {
+ tries++;
+ if (tries >= 5) {
+ ret = -1;
+ break; /* quit */
+ }
+ } else {
+ tries = 0;
+ old_v_level = ctrl->v_level;
+ }
+
+ edp_sink_train_set_adjust(ctrl, link_status);
+ ret = edp_voltage_pre_emphasise_set(ctrl);
+ if (ret)
+ return ret;
+ }
+
+ return ret;
+}
+
+static int edp_start_link_train_2(struct edp_ctrl *ctrl)
+{
+ u8 link_status[DP_LINK_STATUS_SIZE];
+ int tries;
+ int ret = 0;
+ int rlen;
+
+ DBG("");
+
+ edp_host_train_set(ctrl, 0x02); /* train_2 */
+ ret = edp_voltage_pre_emphasise_set(ctrl);
+ if (ret)
+ return ret;
+
+ ret = edp_train_pattern_set_write(ctrl, 0x22); /* train_2 */
+ if (ret)
+ return ret;
+
+ tries = 0;
+ while (1) {
+ drm_dp_link_train_channel_eq_delay(ctrl->dpcd);
+
+ rlen = drm_dp_dpcd_read_link_status(ctrl->drm_aux, link_status);
+ if (rlen < DP_LINK_STATUS_SIZE) {
+ pr_err("%s: read link status failed\n", __func__);
+ return -ENOLINK;
+ }
+ if (drm_dp_channel_eq_ok(link_status, ctrl->lane_cnt)) {
+ ret = 0;
+ break;
+ }
+
+ tries++;
+ if (tries > 10) {
+ ret = -1;
+ break;
+ }
+
+ edp_sink_train_set_adjust(ctrl, link_status);
+ ret = edp_voltage_pre_emphasise_set(ctrl);
+ if (ret)
+ return ret;
+ }
+
+ return ret;
+}
+
+static int edp_link_rate_down_shift(struct edp_ctrl *ctrl)
+{
+ u32 prate, lrate, bpp;
+ u8 rate, lane, max_lane;
+ int changed = 0;
+
+ rate = ctrl->link_rate;
+ lane = ctrl->lane_cnt;
+ max_lane = ctrl->dp_link.num_lanes;
+
+ bpp = ctrl->color_depth * RGB_COMPONENTS;
+ prate = ctrl->pixel_rate;
+ prate *= bpp;
+ prate /= 8; /* in kByte */
+
+ if (rate > DP_LINK_BW_1_62 && rate <= EDP_LINK_BW_MAX) {
+ rate -= 4; /* reduce rate */
+ changed++;
+ }
+
+ if (changed) {
+ if (lane >= 1 && lane < max_lane)
+ lane <<= 1; /* increase lane */
+
+ lrate = 270000; /* in kHz */
+ lrate *= rate;
+ lrate /= 10; /* kByte, 10 bits --> 8 bits */
+ lrate *= lane;
+
+ DBG("new lrate=%u prate=%u(kHz) rate=%d lane=%d p=%u b=%d",
+ lrate, prate, rate, lane,
+ ctrl->pixel_rate,
+ bpp);
+
+ if (lrate > prate) {
+ ctrl->link_rate = rate;
+ ctrl->lane_cnt = lane;
+ DBG("new rate=%d %d", rate, lane);
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int edp_clear_training_pattern(struct edp_ctrl *ctrl)
+{
+ int ret;
+
+ ret = edp_train_pattern_set_write(ctrl, 0);
+
+ drm_dp_link_train_channel_eq_delay(ctrl->dpcd);
+
+ return ret;
+}
+
+static int edp_do_link_train(struct edp_ctrl *ctrl)
+{
+ int ret = EDP_TRAIN_SUCCESS;
+ struct drm_dp_link dp_link;
+
+ DBG("");
+ /*
+ * Set the current link rate and lane cnt to panel. They may have been
+ * adjusted and the values are different from them in DPCD CAP
+ */
+ dp_link.num_lanes = ctrl->lane_cnt;
+ dp_link.rate = drm_dp_bw_code_to_link_rate(ctrl->link_rate);
+ dp_link.capabilities = ctrl->dp_link.capabilities;
+ if (drm_dp_link_configure(ctrl->drm_aux, &dp_link) < 0)
+ return EDP_TRAIN_FAIL;
+
+ ctrl->v_level = 0; /* start from default level */
+ ctrl->p_level = 0;
+
+ edp_state_ctrl(ctrl, 0);
+ if (edp_clear_training_pattern(ctrl))
+ return EDP_TRAIN_FAIL;
+
+ ret = edp_start_link_train_1(ctrl);
+ if (ret < 0) {
+ if (edp_link_rate_down_shift(ctrl) == 0) {
+ DBG("link reconfig");
+ ret = EDP_TRAIN_RECONFIG;
+ goto clear;
+ } else {
+ pr_err("%s: Training 1 failed", __func__);
+ ret = EDP_TRAIN_FAIL;
+ goto clear;
+ }
+ }
+ DBG("Training 1 completed successfully");
+
+ edp_state_ctrl(ctrl, 0);
+ if (edp_clear_training_pattern(ctrl))
+ return EDP_TRAIN_FAIL;
+
+ ret = edp_start_link_train_2(ctrl);
+ if (ret < 0) {
+ if (edp_link_rate_down_shift(ctrl) == 0) {
+ DBG("link reconfig");
+ ret = EDP_TRAIN_RECONFIG;
+ goto clear;
+ } else {
+ pr_err("%s: Training 2 failed", __func__);
+ ret = EDP_TRAIN_FAIL;
+ goto clear;
+ }
+ }
+ DBG("Training 2 completed successfully");
+
+ edp_state_ctrl(ctrl, ST_SEND_VIDEO);
+clear:
+ edp_clear_training_pattern(ctrl);
+
+ return ret;
+}
+
+static void edp_clock_synchrous(struct edp_ctrl *ctrl, int sync)
+{
+ u32 data;
+ u32 color;
+
+ data = edp_read(ctrl->base + EDP_MISC1_MISC0);
+
+ if (sync)
+ data |= 0x01;
+ else
+ data &= ~0x01;
+
+ /* only legacy rgb mode supported */
+ color = 0; /* 6 bits */
+ if (ctrl->color_depth == 8)
+ color = 0x01;
+ else if (ctrl->color_depth == 10)
+ color = 0x02;
+ else if (ctrl->color_depth == 12)
+ color = 0x03;
+ else if (ctrl->color_depth == 16)
+ color = 0x04;
+
+ color <<= 5; /* bit 5 to bit 7 */
+
+ data &= 0xffffff1f;
+ data |= color;
+
+ edp_write(ctrl->base + EDP_MISC1_MISC0, data);
+}
+
+static int edp_sw_mvid_nvid(struct edp_ctrl *ctrl, u32 m, u32 n)
+{
+ u32 n_multi, m_multi = 5;
+
+ if (ctrl->link_rate == DP_LINK_BW_1_62) {
+ n_multi = 1;
+ } else if (ctrl->link_rate == DP_LINK_BW_2_7) {
+ n_multi = 2;
+ } else {
+ pr_err("%s: Invalid link rate, %d\n", __func__,
+ ctrl->link_rate);
+ return -EINVAL;
+ }
+
+ edp_write(ctrl->base + EDP_SOFTWARE_MVID, m * m_multi);
+ edp_write(ctrl->base + EDP_SOFTWARE_NVID, n * n_multi);
+
+ return 0;
+}
+
+static void edp_mainlink_ctrl(struct edp_ctrl *ctrl, int enable)
+{
+ u32 data = 0;
+
+ edp_write(ctrl->base + EDP_MAINLINK_CTRL, 0x02); /* reset */
+ wmb();
+ usleep_range(500, 1000);
+
+ if (enable)
+ data |= 0x1;
+
+ edp_write(ctrl->base + EDP_MAINLINK_CTRL, data);
+}
+
+static void edp_ctrl_phy_aux_enable(struct edp_ctrl *ctrl, int enable)
+{
+ if (enable) {
+ edp_clk_enable(ctrl, EDP_CLK_MASK_AUX_CHAN);
+ msm_edp_phy_ctrl(ctrl->phy_priv, 1);
+ msm_edp_aux_ctrl(ctrl->aux_priv, 1);
+ gpio_set_value(ctrl->gpio_panel_en, 1);
+ } else {
+ gpio_set_value(ctrl->gpio_panel_en, 0);
+ msm_edp_aux_ctrl(ctrl->aux_priv, 0);
+ msm_edp_phy_ctrl(ctrl->phy_priv, 0);
+ edp_clk_disable(ctrl, EDP_CLK_MASK_AUX_CHAN);
+ }
+}
+
+static void edp_ctrl_link_enable(struct edp_ctrl *ctrl, int enable)
+{
+ u32 m, n;
+
+ if (enable) {
+ /* Enable link channel clocks */
+ edp_clk_enable(ctrl, EDP_CLK_MASK_LINK_CHAN);
+
+ msm_edp_phy_lane_power_ctrl(ctrl->phy_priv, 1, ctrl->lane_cnt);
+
+ msm_edp_phy_vm_pe_init(ctrl->phy_priv);
+
+ /* Make sure phy is programed */
+ wmb();
+ msm_edp_phy_ready(ctrl->phy_priv);
+
+ edp_config_ctrl(ctrl);
+ msm_edp_ctrl_pixel_clock_valid(ctrl, ctrl->pixel_rate, &m, &n);
+ edp_sw_mvid_nvid(ctrl, m, n);
+ edp_mainlink_ctrl(ctrl, 1);
+ } else {
+ edp_mainlink_ctrl(ctrl, 0);
+
+ msm_edp_phy_lane_power_ctrl(ctrl->phy_priv, 0, 0);
+ edp_clk_disable(ctrl, EDP_CLK_MASK_LINK_CHAN);
+ }
+}
+
+static int edp_ctrl_training(struct edp_ctrl *ctrl)
+{
+ int ret;
+
+ /* Do link training only when power is on */
+ if (ctrl->cont_splash || (!ctrl->power_on))
+ return -EINVAL;
+
+train_start:
+ ret = edp_do_link_train(ctrl);
+ if (ret == EDP_TRAIN_RECONFIG) {
+ /* Re-configure main link */
+ edp_ctrl_irq_enable(ctrl, 0);
+ edp_ctrl_link_enable(ctrl, 0);
+ msm_edp_phy_ctrl(ctrl->phy_priv, 0);
+
+ /* Make sure link is fully disabled */
+ wmb();
+ usleep_range(500, 1000);
+
+ msm_edp_phy_ctrl(ctrl->phy_priv, 1);
+ edp_ctrl_link_enable(ctrl, 1);
+ edp_ctrl_irq_enable(ctrl, 1);
+ goto train_start;
+ }
+
+ return ret;
+}
+
+static int edp_ctrl_set_backlight(struct edp_ctrl *ctrl, u32 bl_level)
+{
+ int ret = 0;
+ int period_ns;
+
+ if (!ctrl->bl_pwm) {
+ pr_err("%s: pwm is not initialized\n", __func__);
+ return -ENODEV;
+ }
+
+ if (bl_level > EDP_BACKLIGHT_MAX)
+ bl_level = EDP_BACKLIGHT_MAX;
+
+ mutex_lock(&ctrl->bl_mutex);
+ if (bl_level == ctrl->bl_level)
+ goto unlock_ret;
+
+ period_ns = ctrl->pwm_period * NSEC_PER_USEC;
+ ret = pwm_config(ctrl->bl_pwm,
+ (u64)bl_level * period_ns / EDP_BACKLIGHT_MAX,
+ period_ns);
+ if (ret) {
+ pr_err("%s: pwm_config() failed err=%d.\n", __func__, ret);
+ goto unlock_ret;
+ }
+
+ if (ctrl->bl_level > 0) {
+ pwm_disable(ctrl->bl_pwm);
+ ctrl->bl_level = 0;
+ }
+
+ /* Keep the power off when level is 0 */
+ if (!bl_level) {
+ gpio_set_value(ctrl->gpio_bkl_en, 0);
+ ctrl->bl_level = 0;
+ goto unlock_ret;
+ }
+
+ ret = pwm_enable(ctrl->bl_pwm);
+ if (ret) {
+ pr_err("%s: pwm_enable() failed err=%d\n", __func__,
+ ret);
+ goto unlock_ret;
+ }
+ ctrl->bl_level = bl_level;
+ gpio_set_value(ctrl->gpio_bkl_en, 1);
+
+unlock_ret:
+ mutex_unlock(&ctrl->bl_mutex);
+ return ret;
+}
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+/*
+ * Backlight Interfaces
+ */
+static int edp_backlight_get_brightness(struct backlight_device *bd)
+{
+ struct edp_ctrl *ctrl = bl_get_data(bd);
+
+ return ctrl->bl_level;
+}
+
+static int edp_backlight_set_brightness(struct backlight_device *bd)
+{
+ struct edp_ctrl *ctrl = bl_get_data(bd);
+
+ if (bd->props.brightness > bd->props.max_brightness)
+ bd->props.brightness = bd->props.max_brightness;
+
+ return edp_ctrl_set_backlight(ctrl, bd->props.brightness);
+}
+
+static const struct backlight_ops edp_backlight_ops = {
+ .get_brightness = edp_backlight_get_brightness,
+ .update_status = edp_backlight_set_brightness,
+};
+
+static int edp_backlight_dev_register(struct edp_ctrl *ctrl)
+{
+ struct backlight_properties props;
+ int ret;
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ /* Use the same max value as in driver */
+ props.max_brightness = EDP_BACKLIGHT_MAX;
+ props.type = BACKLIGHT_RAW;
+
+ ctrl->backlight_dev = backlight_device_register("edp-backlight",
+ NULL, (void *)ctrl, &edp_backlight_ops, &props);
+ if (IS_ERR(ctrl->backlight_dev)) {
+ pr_err("%s: Register backlight device failed\n", __func__);
+ ret = PTR_ERR(ctrl->backlight_dev);
+ ctrl->backlight_dev = NULL;
+ return ret;
+ }
+
+ ctrl->backlight_dev->props.brightness =
+ edp_backlight_get_brightness(ctrl->backlight_dev);
+ backlight_update_status(ctrl->backlight_dev);
+
+ return 0;
+}
+
+static void edp_backlight_dev_unregister(struct edp_ctrl *ctrl)
+{
+ if (ctrl->backlight_dev) {
+ backlight_device_unregister(ctrl->backlight_dev);
+ ctrl->backlight_dev = NULL;
+ }
+}
+#else
+static int edp_backlight_dev_register(struct edp_ctrl *ctrl)
+{
+ return 0;
+}
+
+static void edp_backlight_dev_unregister(struct edp_ctrl *ctrl)
+{
+}
+#endif
+
+static void edp_ctrl_on_worker(struct work_struct *work)
+{
+ struct edp_ctrl *ctrl = container_of(
+ work, struct edp_ctrl, on_work);
+ int ret;
+
+ mutex_lock(&ctrl->dev_mutex);
+
+ if (ctrl->power_on) {
+ DBG("already on");
+ goto unlock_ret;
+ }
+
+ DBG("+, cont_splash=%d", ctrl->cont_splash);
+
+ if (!ctrl->cont_splash) {
+ edp_ctrl_phy_aux_enable(ctrl, 1);
+ edp_ctrl_link_enable(ctrl, 1);
+ }
+
+ edp_ctrl_irq_enable(ctrl, 1);
+ ret = edp_sink_power_state(ctrl, DP_SET_POWER_D0);
+ if (ret)
+ goto fail;
+
+ ctrl->power_on = true;
+ ctrl->cont_splash = 0;
+
+ /* Start link training */
+ ret = edp_ctrl_training(ctrl);
+ if (ret != EDP_TRAIN_SUCCESS)
+ goto fail;
+
+ /* Turn on backlight to max brightness */
+ edp_ctrl_set_backlight(ctrl, EDP_BACKLIGHT_MAX);
+
+ DBG("DONE");
+ goto unlock_ret;
+
+fail:
+ edp_ctrl_irq_enable(ctrl, 0);
+ if (!ctrl->cont_splash) {
+ edp_ctrl_link_enable(ctrl, 0);
+ edp_ctrl_phy_aux_enable(ctrl, 0);
+ }
+ ctrl->power_on = false;
+unlock_ret:
+ mutex_unlock(&ctrl->dev_mutex);
+}
+
+static void edp_ctrl_off_worker(struct work_struct *work)
+{
+ struct edp_ctrl *ctrl = container_of(
+ work, struct edp_ctrl, off_work);
+ int ret = 0;
+
+ mutex_lock(&ctrl->dev_mutex);
+
+ if (!ctrl->power_on) {
+ DBG("already off");
+ goto unlock_ret;
+ }
+
+ /* Turn off backlight */
+ edp_ctrl_set_backlight(ctrl, 0);
+
+ reinit_completion(&ctrl->idle_comp);
+ edp_state_ctrl(ctrl, ST_PUSH_IDLE);
+
+ ret = wait_for_completion_timeout(&ctrl->idle_comp,
+ msecs_to_jiffies(500));
+ if (ret <= 0)
+ pr_err("%s: idle pattern timedout, %d\n",
+ __func__, ret);
+
+ edp_state_ctrl(ctrl, 0);
+
+ edp_sink_power_state(ctrl, DP_SET_POWER_D3);
+
+ edp_ctrl_irq_enable(ctrl, 0);
+
+ edp_ctrl_link_enable(ctrl, 0);
+
+ edp_ctrl_phy_aux_enable(ctrl, 0);
+
+ ctrl->cont_splash = false;
+ ctrl->power_on = false;
+
+unlock_ret:
+ mutex_unlock(&ctrl->dev_mutex);
+}
+
+irqreturn_t msm_edp_ctrl_irq(void *edp_ctrl)
+{
+ struct edp_ctrl *ctrl = edp_ctrl;
+ u32 isr1, isr2, mask1, mask2;
+ u32 ack;
+
+ DBG("");
+ spin_lock(&ctrl->irq_lock);
+ isr1 = edp_read(ctrl->base + EDP_INTERRUPT_REG_1);
+ isr2 = edp_read(ctrl->base + EDP_INTERRUPT_REG_2);
+
+ mask1 = isr1 & EDP_INTR_MASK1;
+ mask2 = isr2 & EDP_INTR_MASK2;
+
+ isr1 &= ~mask1; /* remove masks bit */
+ isr2 &= ~mask2;
+
+ DBG("isr=%x mask=%x isr2=%x mask2=%x",
+ isr1, mask1, isr2, mask2);
+
+ ack = isr1 & EDP_INTR_STATUS1;
+ ack <<= 1; /* ack bits */
+ ack |= mask1;
+ edp_write(ctrl->base + EDP_INTERRUPT_REG_1, ack);
+
+ ack = isr2 & EDP_INTR_STATUS2;
+ ack <<= 1; /* ack bits */
+ ack |= mask2;
+ edp_write(ctrl->base + EDP_INTERRUPT_REG_2, ack);
+ spin_unlock(&ctrl->irq_lock);
+
+ if (isr1 & EDP_INTR_HPD)
+ DBG("edp_hpd");
+
+ if (isr2 & EDP_INTR_READY_FOR_VIDEO)
+ DBG("edp_video_ready");
+
+ if (isr2 & EDP_INTR_IDLE_PATTERNs_SENT) {
+ DBG("idle_patterns_sent");
+ complete(&ctrl->idle_comp);
+ }
+
+ msm_edp_aux_irq(ctrl->aux_priv, isr1);
+
+ return IRQ_HANDLED;
+}
+
+void msm_edp_ctrl_power(void *edp_ctrl, bool on)
+{
+ struct edp_ctrl *ctrl = edp_ctrl;
+
+ if (on)
+ queue_work(ctrl->workqueue, &ctrl->on_work);
+ else
+ queue_work(ctrl->workqueue, &ctrl->off_work);
+}
+
+int msm_edp_ctrl_init(struct msm_edp *edp)
+{
+ struct edp_ctrl *ctrl = NULL;
+ int ret = 0;
+
+ if (!edp) {
+ pr_err("%s: edp is NULL!\n", __func__);
+ return -EINVAL;
+ }
+
+ ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
+
+ edp->ctrl_priv = ctrl;
+ ctrl->pdev = edp->pdev;
+
+ ctrl->gpio_bkl_en = -1;
+ ctrl->gpio_lvl_en = -1;
+ ctrl->gpio_panel_en = -1;
+ ctrl->gpio_panel_hpd = -1;
+
+ ctrl->cont_splash = cont_splash;
+
+ DBG("cont_splash=%d", ctrl->cont_splash);
+
+ ctrl->base = msm_ioremap(ctrl->pdev, "edp", "eDP");
+ if (IS_ERR(ctrl->base))
+ goto f0;
+
+ spin_lock_init(&ctrl->irq_lock);
+
+ mutex_init(&ctrl->dev_mutex);
+ mutex_init(&ctrl->bl_mutex);
+ init_completion(&ctrl->idle_comp);
+
+ /* Get regulator, clock, gpio, pwm */
+ ret = edp_regulator_init(ctrl);
+ if (ret) {
+ pr_err("%s:regulator init fail\n", __func__);
+ goto f1;
+ }
+ ret = edp_clk_init(ctrl);
+ if (ret) {
+ pr_err("%s:clk init fail\n", __func__);
+ goto f2;
+ }
+ ret = edp_gpio_config(ctrl, true);
+ if (ret) {
+ pr_err("%s:failed to configure GPIOs: %d", __func__, ret);
+ goto f3;
+ }
+ ret = edp_pwm_config(ctrl, true);
+ if (ret) {
+ pr_err("%s:failed to get pwm: %d", __func__, ret);
+ goto f4;
+ }
+
+ edp_level_trans_enable(ctrl);
+
+ if (ctrl->cont_splash) {
+ /* vote for clocks */
+ edp_clk_enable(ctrl, EDP_CLK_MASK_ALL);
+ ctrl->power_on = true;
+ pwm_enable(ctrl->bl_pwm);
+ ctrl->bl_level = EDP_BACKLIGHT_MAX;
+ } else {
+ /* Make sure the back light is off before on */
+ pwm_disable(ctrl->bl_pwm);
+ ctrl->bl_level = 0;
+ }
+
+ /* Init aux and phy */
+ ctrl->aux_priv = msm_edp_aux_init(&ctrl->pdev->dev, ctrl->base,
+ &ctrl->drm_aux);
+ if (!ctrl->aux_priv || !ctrl->drm_aux) {
+ pr_err("%s:failed to init aux\n", __func__);
+ goto f5;
+ }
+
+ ctrl->phy_priv = msm_edp_phy_init(ctrl->base);
+ if (!ctrl->phy_priv) {
+ pr_err("%s:failed to init phy\n", __func__);
+ goto f6;
+ }
+
+ /* setup workqueue */
+ ctrl->workqueue = alloc_ordered_workqueue("edp_drm_work", 0);
+ INIT_WORK(&ctrl->on_work, edp_ctrl_on_worker);
+ INIT_WORK(&ctrl->off_work, edp_ctrl_off_worker);
+
+ /* Register backlight device */
+ edp_backlight_dev_register(ctrl);
+
+ return 0;
+
+f6:
+ msm_edp_aux_destroy(ctrl->aux_priv);
+ ctrl->aux_priv = NULL;
+f5:
+ edp_pwm_config(ctrl, false);
+f4:
+ edp_gpio_config(ctrl, false);
+f3:
+ edp_clk_deinit(ctrl);
+f2:
+ edp_regulator_deinit(ctrl);
+f1:
+ mutex_destroy(&ctrl->bl_mutex);
+ mutex_destroy(&ctrl->dev_mutex);
+ iounmap(ctrl->base);
+ ctrl->base = NULL;
+ kfree(ctrl);
+ edp->ctrl_priv = NULL;
+f0:
+ return ret;
+}
+
+void msm_edp_ctrl_destroy(void *edp_ctrl)
+{
+ struct edp_ctrl *ctrl = edp_ctrl;
+
+ if (!ctrl)
+ return;
+
+ edp_backlight_dev_unregister(ctrl);
+ if (ctrl->workqueue) {
+ flush_workqueue(ctrl->workqueue);
+ destroy_workqueue(ctrl->workqueue);
+ ctrl->workqueue = NULL;
+ }
+
+ if (ctrl->phy_priv) {
+ msm_edp_phy_destroy(ctrl->phy_priv);
+ ctrl->phy_priv = NULL;
+ }
+
+ if (ctrl->aux_priv) {
+ msm_edp_aux_destroy(ctrl->aux_priv);
+ ctrl->aux_priv = NULL;
+ }
+
+ kfree(ctrl->edid);
+ ctrl->edid = NULL;
+
+ edp_level_trans_disable(ctrl);
+ edp_pwm_config(ctrl, false);
+ edp_gpio_config(ctrl, false);
+ edp_clk_deinit(ctrl);
+ edp_regulator_deinit(ctrl);
+
+ mutex_destroy(&ctrl->bl_mutex);
+ mutex_destroy(&ctrl->dev_mutex);
+ if (ctrl->base) {
+ devm_iounmap(&ctrl->pdev->dev, ctrl->base);
+ ctrl->base = NULL;
+ }
+
+ kfree(ctrl);
+}
+
+bool msm_edp_ctrl_panel_connected(void *edp_ctrl)
+{
+ struct edp_ctrl *ctrl = edp_ctrl;
+ bool ret;
+
+ mutex_lock(&ctrl->dev_mutex);
+ DBG("connect status = %d", ctrl->edp_connected);
+ if (ctrl->edp_connected) {
+ mutex_unlock(&ctrl->dev_mutex);
+ return true;
+ }
+
+ if (!ctrl->power_on) {
+ if (!ctrl->cont_splash)
+ edp_ctrl_phy_aux_enable(ctrl, 1);
+ edp_ctrl_irq_enable(ctrl, 1);
+ }
+
+ if (drm_dp_dpcd_read(ctrl->drm_aux, DP_DPCD_REV, ctrl->dpcd,
+ DP_RECEIVER_CAP_SIZE) < DP_RECEIVER_CAP_SIZE) {
+ pr_err("%s: AUX channel is NOT ready\n", __func__);
+ memset(ctrl->dpcd, 0, DP_RECEIVER_CAP_SIZE);
+ } else {
+ ctrl->edp_connected = true;
+ }
+
+ if (!ctrl->power_on) {
+ edp_ctrl_irq_enable(ctrl, 0);
+ if (!ctrl->cont_splash)
+ edp_ctrl_phy_aux_enable(ctrl, 0);
+ }
+
+ DBG("exit: connect status=%d", ctrl->edp_connected);
+
+ ret = ctrl->edp_connected;
+ mutex_unlock(&ctrl->dev_mutex);
+
+ return ret;
+}
+
+int msm_edp_ctrl_get_edid(void *edp_ctrl,
+ struct drm_connector *connector, struct edid **edid)
+{
+ struct edp_ctrl *ctrl = edp_ctrl;
+ int ret = 0;
+
+ mutex_lock(&ctrl->dev_mutex);
+
+ if (ctrl->edid) {
+ if (edid) {
+ DBG("Just return edid buffer");
+ *edid = ctrl->edid;
+ }
+ goto unlock_ret;
+ }
+
+ if (!ctrl->power_on) {
+ if (!ctrl->cont_splash)
+ edp_ctrl_phy_aux_enable(ctrl, 1);
+ edp_ctrl_irq_enable(ctrl, 1);
+ }
+
+ ret = drm_dp_link_probe(ctrl->drm_aux, &ctrl->dp_link);
+ if (ret) {
+ pr_err("%s: read dpcd cap failed, %d\n", __func__, ret);
+ goto disable_ret;
+ }
+
+ /* Initialize link rate as panel max link rate */
+ ctrl->link_rate = drm_dp_link_rate_to_bw_code(ctrl->dp_link.rate);
+
+ ctrl->edid = drm_get_edid(connector, &ctrl->drm_aux->ddc);
+ if (!ctrl->edid) {
+ pr_err("%s: edid read fail\n", __func__);
+ goto disable_ret;
+ }
+
+ if (edid)
+ *edid = ctrl->edid;
+
+disable_ret:
+ if (!ctrl->power_on) {
+ edp_ctrl_irq_enable(ctrl, 0);
+ if (!ctrl->cont_splash)
+ edp_ctrl_phy_aux_enable(ctrl, 0);
+ }
+unlock_ret:
+ mutex_unlock(&ctrl->dev_mutex);
+ return ret;
+}
+
+int msm_edp_ctrl_timing_cfg(void *edp_ctrl,
+ struct drm_display_mode *mode, struct drm_display_info *info)
+{
+ struct edp_ctrl *ctrl = edp_ctrl;
+ u32 data = 0;
+ int ret = 0;
+
+ mutex_lock(&ctrl->dev_mutex);
+ /*
+ * Need to keep color depth, pixel rate and
+ * interlaced information in ctrl context
+ */
+ ctrl->color_depth = info->bpc;
+ ctrl->pixel_rate = mode->clock;
+ ctrl->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+
+ /* Fill initial link config based on passed in timing */
+ edp_fill_link_cfg(ctrl);
+
+ if (edp_clk_enable(ctrl, EDP_CLK_MASK_AHB)) {
+ pr_err("%s, fail to prepare enable ahb clk\n", __func__);
+ ret = -EINVAL;
+ goto unlock_ret;
+ }
+ edp_clock_synchrous(ctrl, 1);
+
+ /* Configure eDP timing to HW */
+ data = mode->vtotal;
+ data <<= 16;
+ data |= mode->htotal;
+ edp_write(ctrl->base + EDP_TOTAL_HOR_VER, data);
+
+ data = mode->vtotal - mode->vsync_start;
+ data <<= 16;
+ data |= (mode->htotal - mode->hsync_start);
+ edp_write(ctrl->base + EDP_START_HOR_VER_FROM_SYNC, data);
+
+ data = mode->vsync_end - mode->vsync_start;
+ data <<= 16;
+ data |= (mode->hsync_end - mode->hsync_start);
+ if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+ data |= BIT(31);
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ data |= BIT(15);
+ edp_write(ctrl->base + EDP_HSYNC_VSYNC_WIDTH_POLARITY, data);
+
+ data = mode->vdisplay;
+ data <<= 16;
+ data |= mode->hdisplay;
+ edp_write(ctrl->base + EDP_ACTIVE_HOR_VER, data);
+
+ edp_clk_disable(ctrl, EDP_CLK_MASK_AHB);
+
+unlock_ret:
+ mutex_unlock(&ctrl->dev_mutex);
+ return ret;
+}
+
+bool msm_edp_ctrl_pixel_clock_valid(void *edp_ctrl,
+ u32 pixel_rate, u32 *pm, u32 *pn)
+{
+ struct edp_ctrl *ctrl = edp_ctrl;
+ const struct edp_pixel_clk_div *divs;
+ u32 err = 1; /* 1% error tolerance */
+ u32 clk_err;
+ int i;
+
+ if (ctrl->link_rate == DP_LINK_BW_1_62) {
+ divs = clk_divs[0];
+ } else if (ctrl->link_rate == DP_LINK_BW_2_7) {
+ divs = clk_divs[1];
+ } else {
+ pr_err("%s: Invalid link rate,%d\n", __func__, ctrl->link_rate);
+ return false;
+ }
+
+ for (i = 0; i < EDP_PIXEL_CLK_NUM; i++) {
+ clk_err = abs(divs[i].rate - pixel_rate);
+ if ((divs[i].rate * err / 100) >= clk_err) {
+ if (pm)
+ *pm = divs[i].m;
+ if (pn)
+ *pn = divs[i].n;
+ return true;
+ }
+ }
+
+ DBG("pixel clock %d(kHz) not supported", pixel_rate);
+
+ return false;
+}
+
diff --git a/drivers/gpu/drm/msm/edp/edp_phy.c b/drivers/gpu/drm/msm/edp/edp_phy.c
new file mode 100644
index 0000000..0aafa41
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp_phy.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "edp.h"
+#include "edp_reg.h"
+
+#define EDP_MAX_LANE 4
+
+struct edp_phy {
+ void __iomem *base;
+};
+
+bool msm_edp_phy_ready(void *edp_phy)
+{
+ struct edp_phy *phy = edp_phy;
+ u32 status;
+ int cnt;
+
+ cnt = 100;
+ while (--cnt) {
+ status = edp_read(phy->base + EDP_PHY_EDPPHY_GLB_PHY_STATUS);
+ if (status & 0x01)
+ break;
+ usleep_range(500, 1000);
+ }
+
+ if (cnt <= 0) {
+ pr_err("%s: PHY NOT ready\n", __func__);
+ return false;
+ } else {
+ return true;
+ }
+}
+
+void msm_edp_phy_ctrl(void *edp_phy, int enable)
+{
+ struct edp_phy *phy = edp_phy;
+
+ DBG("enable=%d", enable);
+ if (enable) {
+ /* Reset */
+ edp_write(phy->base + EDP_PHY_CTRL, 0x005); /* bit 0, 2 */
+ wmb();
+ usleep_range(500, 1000);
+ edp_write(phy->base + EDP_PHY_CTRL, 0x000);
+ edp_write(phy->base + EDP_PHY_EDPPHY_GLB_PD_CTL, 0x3f);
+ edp_write(phy->base + EDP_PHY_EDPPHY_GLB_CFG, 0x1);
+ } else {
+ edp_write(phy->base + EDP_PHY_EDPPHY_GLB_PD_CTL, 0xc0);
+ }
+}
+
+/* voltage mode and pre emphasis cfg */
+void msm_edp_phy_vm_pe_init(void *edp_phy)
+{
+ struct edp_phy *phy = edp_phy;
+
+ edp_write(phy->base + EDP_PHY_EDPPHY_GLB_VM_CFG0, 0x3); /* vm only */
+ edp_write(phy->base + EDP_PHY_EDPPHY_GLB_VM_CFG1, 0x64);
+ edp_write(phy->base + EDP_PHY_EDPPHY_GLB_MISC9, 0x6c);
+}
+
+void msm_edp_phy_vm_pe_cfg(void *edp_phy, u32 v0, u32 v1)
+{
+ struct edp_phy *phy = edp_phy;
+
+ edp_write(phy->base + EDP_PHY_EDPPHY_GLB_VM_CFG0, v0);
+ edp_write(phy->base + EDP_PHY_EDPPHY_GLB_VM_CFG1, v1);
+}
+
+void msm_edp_phy_lane_power_ctrl(void *edp_phy, int up, int max_lane)
+{
+ struct edp_phy *phy = edp_phy;
+ int i, off;
+ u32 data;
+
+ if (up)
+ data = 0; /* power up */
+ else
+ data = 0x7; /* power down */
+
+ for (i = 0; i < max_lane; i++) {
+ off = 0x40 * i;
+ edp_write(phy->base + EDP_PHY_EDPPHY_LNn_PD_CTL + off , data);
+ }
+
+ /* power down unused lane */
+ data = 0x7; /* power down */
+ for (i = max_lane; i < EDP_MAX_LANE; i++) {
+ off = 0x40 * i;
+ edp_write(phy->base + EDP_PHY_EDPPHY_LNn_PD_CTL + off , data);
+ }
+}
+
+void *msm_edp_phy_init(void __iomem *regbase)
+{
+ struct edp_phy *phy = NULL;
+
+ phy = kzalloc(sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return NULL;
+
+ phy->base = regbase;
+ return phy;
+}
+
+void msm_edp_phy_destroy(void *edp_phy)
+{
+ struct edp_phy *phy = edp_phy;
+
+ kfree(phy);
+}
+
diff --git a/drivers/gpu/drm/msm/edp/edp_reg.h b/drivers/gpu/drm/msm/edp/edp_reg.h
new file mode 100644
index 0000000..86b0ac6
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp_reg.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __EDP_REG_H__
+#define __EDP_REG_H__
+
+#define EDP_MAINLINK_CTRL 0x004
+#define EDP_STATE_CTRL 0x008
+/* state ctrl bits */
+#define ST_TRAIN_PATTERN_1 BIT(0)
+#define ST_TRAIN_PATTERN_2 BIT(1)
+#define ST_TRAIN_PATTERN_3 BIT(2)
+#define ST_SYMBOL_ERR_RATE_MEASUREMENT BIT(3)
+#define ST_PRBS7 BIT(4)
+#define ST_CUSTOM_80_BIT_PATTERN BIT(5)
+#define ST_SEND_VIDEO BIT(6)
+#define ST_PUSH_IDLE BIT(7)
+
+#define EDP_CONFIGURATION_CTRL 0x00c
+#define EDP_SOFTWARE_MVID 0x014
+#define EDP_SOFTWARE_NVID 0X018
+#define EDP_TOTAL_HOR_VER 0x01c
+#define EDP_START_HOR_VER_FROM_SYNC 0x020
+#define EDP_HSYNC_VSYNC_WIDTH_POLARITY 0x024
+#define EDP_ACTIVE_HOR_VER 0x028
+#define EDP_MISC1_MISC0 0x02c
+#define EDP_PHY_CTRL 0x074
+#define EDP_MAINLINK_READY 0x084
+
+#define EDP_AUX_CTRL 0x300
+#define EDP_INTERRUPT_REG_1 0x308
+/* isr1 bits */
+#define EDP_INTR_HPD BIT(0)
+#define EDP_INTR_AUX_I2C_DONE BIT(3)
+#define EDP_INTR_WRONG_ADDR BIT(6)
+#define EDP_INTR_TIMEOUT BIT(9)
+#define EDP_INTR_NACK_DEFER BIT(12)
+#define EDP_INTR_WRONG_DATA_CNT BIT(15)
+#define EDP_INTR_I2C_NACK BIT(18)
+#define EDP_INTR_I2C_DEFER BIT(21)
+#define EDP_INTR_PLL_UNLOCKED BIT(24)
+#define EDP_INTR_AUX_ERROR BIT(27)
+
+#define EDP_INTR_AUX_I2C_ERR \
+ (EDP_INTR_WRONG_ADDR | EDP_INTR_TIMEOUT | EDP_INTR_NACK_DEFER | \
+ EDP_INTR_WRONG_DATA_CNT | EDP_INTR_I2C_NACK | EDP_INTR_I2C_DEFER)
+#define EDP_INTR_TRANS_STATUS (EDP_INTR_AUX_I2C_DONE | EDP_INTR_AUX_I2C_ERR)
+
+#define EDP_INTR_STATUS1 \
+ (EDP_INTR_HPD | EDP_INTR_AUX_I2C_DONE | \
+ EDP_INTR_WRONG_ADDR | EDP_INTR_TIMEOUT | \
+ EDP_INTR_NACK_DEFER | EDP_INTR_WRONG_DATA_CNT | \
+ EDP_INTR_I2C_NACK | EDP_INTR_I2C_DEFER | \
+ EDP_INTR_PLL_UNLOCKED | EDP_INTR_AUX_ERROR)
+#define EDP_INTR_MASK1 (EDP_INTR_STATUS1 << 2)
+
+#define EDP_INTERRUPT_REG_2 0x30c
+/* isr2 bits */
+#define EDP_INTR_READY_FOR_VIDEO BIT(0)
+#define EDP_INTR_IDLE_PATTERNs_SENT BIT(3)
+#define EDP_INTR_FRAME_END BIT(6)
+#define EDP_INTR_CRC_UPDATED BIT(9)
+
+#define EDP_INTR_STATUS2 \
+ (EDP_INTR_READY_FOR_VIDEO | EDP_INTR_IDLE_PATTERNs_SENT | \
+ EDP_INTR_FRAME_END | EDP_INTR_CRC_UPDATED)
+#define EDP_INTR_MASK2 (EDP_INTR_STATUS2 << 2)
+
+#define EDP_INTERRUPT_TRANS_NUM 0x310
+#define EDP_AUX_DATA 0x314
+#define EDP_AUX_TRANS_CTRL 0x318
+#define EDP_AUX_STATUS 0x324
+
+#define EDP_PHY_EDPPHY_LNn_PD_CTL 0x404
+#define EDP_PHY_EDPPHY_GLB_VM_CFG0 0x510
+#define EDP_PHY_EDPPHY_GLB_VM_CFG1 0x514
+#define EDP_PHY_EDPPHY_GLB_MISC9 0x518
+#define EDP_PHY_EDPPHY_GLB_CFG 0x528
+#define EDP_PHY_EDPPHY_GLB_PD_CTL 0x52c
+#define EDP_PHY_EDPPHY_GLB_PHY_STATUS 0x598
+
+#endif /*__EDP_REG_H__*/
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index 1363038..3b25dd8 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -76,6 +76,12 @@ struct msm_drm_private {
*/
struct hdmi *hdmi;
+ /* eDP is for mdp5 only, but kms has not been created
+ * when edp_bind() and edp_init() are called. Here is the only
+ * place to keep the edp instance.
+ */
+ struct msm_edp *edp;
+
/* when we have more than one 'msm_gpu' these need to be an array: */
struct msm_gpu *gpu;
struct msm_file_private *lastctx;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
More information about the dri-devel
mailing list