[PATCH V2] drm/exynos: Add DECON driver
Ajay Kumar
ajaykumar.rs at samsung.com
Fri Nov 28 03:15:37 PST 2014
This series is based on exynos-drm-next branch of Inki Dae's tree at:
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
DECON(Display and Enhancement Controller) is the new IP
in exynos7 SOC for generating video signals using pixel data.
DECON driver can be used to drive 2 different interfaces on Exynos7:
DECON-INT(video controller) and DECON-EXT(Mixer for HDMI)
The existing FIMD driver code was used as a template to create
DECON driver. Only DECON-INT is supported as of now, and
DECON-EXT support will be added later.
Signed-off-by: Akshu Agrawal <akshua at gmail.com>
Signed-off-by: Ajay Kumar <ajaykumar.rs at samsung.com>
---
Changes since V1:
-- Address comments from Pankaj and do few cleanups.
.../devicetree/bindings/video/exynos7-decon.txt | 67 ++
drivers/gpu/drm/exynos/Kconfig | 13 +-
drivers/gpu/drm/exynos/Makefile | 1 +
drivers/gpu/drm/exynos/exynos7_drm_decon.c | 1037 ++++++++++++++++++++
drivers/gpu/drm/exynos/exynos_drm_drv.c | 4 +
drivers/gpu/drm/exynos/exynos_drm_drv.h | 1 +
include/video/exynos7_decon.h | 346 +++++++
7 files changed, 1466 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/video/exynos7-decon.txt
create mode 100644 drivers/gpu/drm/exynos/exynos7_drm_decon.c
create mode 100644 include/video/exynos7_decon.h
diff --git a/Documentation/devicetree/bindings/video/exynos7-decon.txt b/Documentation/devicetree/bindings/video/exynos7-decon.txt
new file mode 100644
index 0000000..14db519
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/exynos7-decon.txt
@@ -0,0 +1,67 @@
+Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
+
+DECON (Display and Enhancement Controller) is the Display Controller for the
+Exynos7 series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be "samsung,exynos7-decon";
+
+- reg: physical base address and length of the DECON registers set.
+
+- interrupt-parent: should be the phandle of the decon controller's
+ parent interrupt controller.
+
+- interrupts: should contain a list of all DECON IP block interrupts in the
+ order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
+ format depends on the interrupt controller used.
+
+- interrupt-names: should contain the interrupt names: "fifo", "vsync",
+ "lcd_sys", in the same order as they were listed in the interrupts
+ property.
+
+- pinctrl-0: pin control group to be used for this controller.
+
+- pinctrl-names: must contain a "default" entry.
+
+- clocks: must include clock specifiers corresponding to entries in the
+ clock-names property.
+
+- clock-names: list of clock names sorted in the same order as the clocks
+ property. Must contain "pclk_decon0", "aclk_decon0",
+ "decon0_eclk", "decon0_vclk".
+
+Optional Properties:
+- samsung,power-domain: a phandle to DECON power domain node.
+- display-timings: timing settings for FIMD, as described in document [1].
+ Can be used in case timings cannot be provided otherwise
+ or to override timings provided by the panel.
+
+[1]: Documentation/devicetree/bindings/video/display-timing.txt
+
+Example:
+
+SoC specific DT entry:
+
+ decon at 13930000 {
+ compatible = "samsung,exynos7-decon";
+ interrupt-parent = <&combiner>;
+ reg = <0x13930000 0x1000>;
+ interrupt-names = "lcd_sys", "vsync", "fifo";
+ interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
+ clocks = <&clock_disp PCLK_DECON_INT>,
+ <&clock_disp ACLK_DECON_INT>,
+ <&clock_disp SCLK_DECON_INT_ECLK>,
+ <&clock_disp SCLK_DECON_INT_EXTCLKPLL>;
+ clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
+ "decon0_vclk";
+ status = "disabled";
+ };
+
+Board specific DT entry:
+
+ decon at 13930000 {
+ pinctrl-0 = <&lcd_clk &pwm1_out>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index 7f9f6f9..d3434cb 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -32,9 +32,16 @@ config DRM_EXYNOS_FIMD
help
Choose this option if you want to use Exynos FIMD for DRM.
+config DRM_EXYNOS_DECON
+ bool "Exynos DRM DECON"
+ depends on DRM_EXYNOS
+ select FB_MODE_HELPERS
+ help
+ Choose this option if you want to use Exynos DECON for DRM.
+
config DRM_EXYNOS_DPI
bool "EXYNOS DRM parallel output support"
- depends on DRM_EXYNOS_FIMD
+ depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS_DECON)
select DRM_PANEL
default n
help
@@ -42,7 +49,7 @@ config DRM_EXYNOS_DPI
config DRM_EXYNOS_DSI
bool "EXYNOS DRM MIPI-DSI driver support"
- depends on DRM_EXYNOS_FIMD
+ depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS_DECON)
select DRM_MIPI_DSI
select DRM_PANEL
default n
@@ -51,7 +58,7 @@ config DRM_EXYNOS_DSI
config DRM_EXYNOS_DP
bool "EXYNOS DRM DP driver support"
- depends on DRM_EXYNOS_FIMD && ARCH_EXYNOS && (DRM_PTN3460=n || DRM_PTN3460=y || DRM_PTN3460=DRM_EXYNOS)
+ depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS_DECON) && ARCH_EXYNOS && (DRM_PTN3460=n || DRM_PTN3460=y || DRM_PTN3460=DRM_EXYNOS)
default DRM_EXYNOS
select DRM_PANEL
help
diff --git a/drivers/gpu/drm/exynos/Makefile b/drivers/gpu/drm/exynos/Makefile
index 33ae365..d576587 100644
--- a/drivers/gpu/drm/exynos/Makefile
+++ b/drivers/gpu/drm/exynos/Makefile
@@ -11,6 +11,7 @@ exynosdrm-y := exynos_drm_drv.o exynos_drm_encoder.o \
exynosdrm-$(CONFIG_DRM_EXYNOS_IOMMU) += exynos_drm_iommu.o
exynosdrm-$(CONFIG_DRM_EXYNOS_DMABUF) += exynos_drm_dmabuf.o
exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD) += exynos_drm_fimd.o
+exynosdrm-$(CONFIG_DRM_EXYNOS_DECON) += exynos7_drm_decon.o
exynosdrm-$(CONFIG_DRM_EXYNOS_DPI) += exynos_drm_dpi.o
exynosdrm-$(CONFIG_DRM_EXYNOS_DSI) += exynos_drm_dsi.o
exynosdrm-$(CONFIG_DRM_EXYNOS_DP) += exynos_dp_core.o exynos_dp_reg.o
diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c
new file mode 100644
index 0000000..ba4d027
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c
@@ -0,0 +1,1037 @@
+/* drivers/gpu/drm/exynos/exynos7_drm_decon.c
+ *
+ * Copyright (C) 2014 Samsung Electronics Co.Ltd
+ * Authors:
+ * Akshu Agarwal <akshua at gmail.com>
+ * Ajay Kumar <ajaykumar.rs at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <drm/drmP.h>
+#include <drm/exynos_drm.h>
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include <video/of_display_timing.h>
+#include <video/of_videomode.h>
+#include <video/exynos7_decon.h>
+
+#include "exynos_drm_crtc.h"
+#include "exynos_drm_drv.h"
+#include "exynos_drm_fbdev.h"
+#include "exynos_drm_iommu.h"
+
+/*
+ * DECON stands for Display and Enhancement controller, and
+ * as a display controller, it transfers contents drawn on memory
+ * to a LCD Panel through Display Interfaces such as RGB or
+ * CPU Interface.
+ */
+
+#define DECON_DEFAULT_FRAMERATE 60
+#define RESET_TIMEOUT 200
+#define MIN_FB_WIDTH_FOR_16WORD_BURST 128
+
+#define WINDOWS_NR 2
+
+struct decon_win_data {
+ unsigned int ovl_x;
+ unsigned int ovl_y;
+ unsigned int offset_x;
+ unsigned int offset_y;
+ unsigned int ovl_width;
+ unsigned int ovl_height;
+ unsigned int fb_width;
+ unsigned int fb_height;
+ unsigned int bpp;
+ unsigned int pixel_format;
+ dma_addr_t dma_addr;
+ bool enabled;
+ bool resume;
+};
+
+struct decon_context {
+ struct exynos_drm_manager manager;
+ struct device *dev;
+ struct clk *pclk;
+ struct clk *aclk;
+ struct clk *eclk;
+ struct clk *vclk;
+ void __iomem *regs;
+ struct drm_display_mode mode;
+ struct decon_win_data win_data[WINDOWS_NR];
+ unsigned int default_win;
+ unsigned long irq_flags;
+ bool suspended;
+ int pipe;
+ wait_queue_head_t wait_vsync_queue;
+ atomic_t wait_vsync_event;
+
+ struct exynos_drm_panel_info panel;
+ struct exynos_drm_display *display;
+};
+
+static inline struct decon_context *mgr_to_decon(struct exynos_drm_manager *mgr)
+{
+ return container_of(mgr, struct decon_context, manager);
+}
+
+static const struct of_device_id decon_driver_dt_match[] = {
+ { .compatible = "samsung,exynos7-decon"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, decon_driver_dt_match);
+
+static void decon_wait_for_vblank(struct exynos_drm_manager *mgr)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+
+ if (ctx->suspended)
+ return;
+
+ atomic_set(&ctx->wait_vsync_event, 1);
+
+ /*
+ * wait for decon to signal VSYNC interrupt or return after
+ * timeout which is set to 50ms (refresh rate of 20).
+ */
+ if (!wait_event_timeout(ctx->wait_vsync_queue,
+ !atomic_read(&ctx->wait_vsync_event),
+ HZ/20))
+ DRM_DEBUG_KMS("vblank wait timed out.\n");
+}
+
+static void decon_clear_channel(struct exynos_drm_manager *mgr)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+ int win, ch_enabled = 0;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* Check if any channel is enabled. */
+ for (win = 0; win < WINDOWS_NR; win++) {
+ u32 val = readl(ctx->regs + WINCON(win));
+
+ if (val & WINCONx_ENWIN) {
+ val &= ~WINCONx_ENWIN;
+ writel(val, ctx->regs + WINCON(win));
+ ch_enabled = 1;
+ }
+ }
+
+ /* Wait for vsync, as disable channel takes effect at next vsync */
+ if (ch_enabled) {
+ unsigned int state = ctx->suspended;
+
+ ctx->suspended = 0;
+ decon_wait_for_vblank(mgr);
+ ctx->suspended = state;
+ }
+}
+
+static int decon_mgr_initialize(struct exynos_drm_manager *mgr,
+ struct drm_device *drm_dev)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+ struct exynos_drm_private *priv = drm_dev->dev_private;
+ int ret;
+
+ mgr->drm_dev = drm_dev;
+ mgr->pipe = ctx->pipe = priv->pipe++;
+
+ /* attach this sub driver to iommu mapping if supported. */
+ if (is_drm_iommu_supported(mgr->drm_dev)) {
+ /*
+ * If any channel is already active, iommu will throw
+ * a PAGE FAULT when enabled. So clear any channel if enabled.
+ */
+ decon_clear_channel(mgr);
+
+ ret = drm_iommu_attach_device(mgr->drm_dev, ctx->dev);
+ if (ret) {
+ DRM_ERROR("drm_iommu_attach failed.\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void decon_mgr_remove(struct exynos_drm_manager *mgr)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+
+ /* detach this sub driver from iommu mapping if supported. */
+ if (is_drm_iommu_supported(mgr->drm_dev))
+ drm_iommu_detach_device(mgr->drm_dev, ctx->dev);
+}
+
+static u32 decon_calc_clkdiv(struct decon_context *ctx,
+ const struct drm_display_mode *mode)
+{
+ unsigned long ideal_clk = mode->htotal * mode->vtotal * mode->vrefresh;
+ u32 clkdiv;
+
+ /* Find the clock divider value that gets us closest to ideal_clk */
+ clkdiv = DIV_ROUND_UP(clk_get_rate(ctx->vclk), ideal_clk);
+
+ return (clkdiv < 0x100) ? clkdiv : 0xff;
+}
+
+static bool decon_mode_fixup(struct exynos_drm_manager *mgr,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ if (adjusted_mode->vrefresh == 0)
+ adjusted_mode->vrefresh = DECON_DEFAULT_FRAMERATE;
+
+ return true;
+}
+
+static void decon_mode_set(struct exynos_drm_manager *mgr,
+ const struct drm_display_mode *in_mode)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+
+ drm_mode_copy(&ctx->mode, in_mode);
+}
+
+static void decon_commit(struct exynos_drm_manager *mgr)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+ struct drm_display_mode *mode = &ctx->mode;
+ u32 val, clkdiv;
+ int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
+
+ if (ctx->suspended)
+ return;
+
+ /* nothing to do if we haven't set the mode yet */
+ if (mode->htotal == 0 || mode->vtotal == 0)
+ return;
+
+ /* setup vertical timing values. */
+ vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
+ vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
+ vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
+
+ val = VIDTCON0_VBPD(vbpd - 1) | VIDTCON0_VFPD(vfpd - 1);
+ writel(val, ctx->regs + VIDTCON0);
+
+ val = VIDTCON1_VSPW(vsync_len - 1);
+ writel(val, ctx->regs + VIDTCON1);
+
+ /* setup horizontal timing values. */
+ hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
+ hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
+ hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
+
+ /* setup horizontal timing values. */
+ val = VIDTCON2_HBPD(hbpd - 1) | VIDTCON2_HFPD(hfpd - 1);
+ writel(val, ctx->regs + VIDTCON2);
+
+ val = VIDTCON3_HSPW(hsync_len - 1);
+ writel(val, ctx->regs + VIDTCON3);
+
+ /* setup horizontal and vertical display size. */
+ val = VIDTCON4_LINEVAL(mode->vdisplay - 1) |
+ VIDTCON4_HOZVAL(mode->hdisplay - 1);
+ writel(val, ctx->regs + VIDTCON4);
+
+ writel(mode->vdisplay - 1, ctx->regs + LINECNT_OP_THRESHOLD);
+
+ /*
+ * fields of register with prefix '_F' would be updated
+ * at vsync(same as dma start)
+ */
+ val = VIDCON0_ENVID | VIDCON0_ENVID_F;
+ writel(val, ctx->regs + VIDCON0);
+
+ clkdiv = decon_calc_clkdiv(ctx, mode);
+ if (clkdiv > 1) {
+ val = VCLKCON1_CLKVAL_NUM_VCLK(clkdiv - 1);
+ writel(val, ctx->regs + VCLKCON1);
+ writel(val, ctx->regs + VCLKCON2);
+ }
+
+ val = readl(ctx->regs + DECON_UPDATE);
+ val |= DECON_UPDATE_STANDALONE_F;
+ writel(val, ctx->regs + DECON_UPDATE);
+}
+
+static int decon_enable_vblank(struct exynos_drm_manager *mgr)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+ u32 val;
+
+ if (ctx->suspended)
+ return -EPERM;
+
+ if (!test_and_set_bit(0, &ctx->irq_flags)) {
+ val = readl(ctx->regs + VIDINTCON0);
+
+ val |= VIDINTCON0_INT_ENABLE;
+ val |= VIDINTCON0_INT_FRAME;
+
+ val &= ~VIDINTCON0_FRAMESEL0_MASK;
+ val |= VIDINTCON0_FRAMESEL0_VSYNC;
+
+ writel(val, ctx->regs + VIDINTCON0);
+ }
+
+ return 0;
+}
+
+static void decon_disable_vblank(struct exynos_drm_manager *mgr)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+ u32 val;
+
+ if (ctx->suspended)
+ return;
+
+ if (test_and_clear_bit(0, &ctx->irq_flags)) {
+ val = readl(ctx->regs + VIDINTCON0);
+
+ val &= ~VIDINTCON0_INT_ENABLE;
+ val &= ~VIDINTCON0_INT_FRAME;
+
+ writel(val, ctx->regs + VIDINTCON0);
+ }
+}
+
+static void decon_win_mode_set(struct exynos_drm_manager *mgr,
+ struct exynos_drm_overlay *overlay)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+ struct decon_win_data *win_data;
+ int win, padding;
+
+ if (!overlay) {
+ DRM_ERROR("overlay is NULL\n");
+ return;
+ }
+
+ win = overlay->zpos;
+ if (win == DEFAULT_ZPOS)
+ win = ctx->default_win;
+
+ if (win < 0 || win >= WINDOWS_NR)
+ return;
+
+
+ win_data = &ctx->win_data[win];
+
+ padding = (overlay->pitch / (overlay->bpp >> 3)) - overlay->fb_width;
+ win_data->offset_x = overlay->fb_x;
+ win_data->offset_y = overlay->fb_y;
+ win_data->fb_width = overlay->fb_width + padding;
+ win_data->fb_height = overlay->fb_height;
+ win_data->ovl_x = overlay->crtc_x;
+ win_data->ovl_y = overlay->crtc_y;
+ win_data->ovl_width = overlay->crtc_width;
+ win_data->ovl_height = overlay->crtc_height;
+ win_data->dma_addr = overlay->dma_addr[0];
+ win_data->bpp = overlay->bpp;
+ win_data->pixel_format = overlay->pixel_format;
+
+ DRM_DEBUG_KMS("offset_x = %d, offset_y = %d\n",
+ win_data->offset_x, win_data->offset_y);
+ DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
+ win_data->ovl_width, win_data->ovl_height);
+ DRM_DEBUG_KMS("paddr = 0x%lx\n", (unsigned long)win_data->dma_addr);
+ DRM_DEBUG_KMS("fb_width = %d, crtc_width = %d\n",
+ overlay->fb_width, overlay->crtc_width);
+}
+
+static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win)
+{
+ struct decon_win_data *win_data = &ctx->win_data[win];
+ unsigned long val;
+
+ val = readl(ctx->regs + WINCON(win));
+ val &= ~WINCONx_BPPMODE_MASK;
+
+ switch (win_data->pixel_format) {
+ case DRM_FORMAT_RGB565:
+ val |= WINCONx_BPPMODE_16BPP_565;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ case DRM_FORMAT_XRGB8888:
+ val |= WINCONx_BPPMODE_24BPP_xRGB;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ case DRM_FORMAT_XBGR8888:
+ val |= WINCONx_BPPMODE_24BPP_xBGR;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ case DRM_FORMAT_RGBX8888:
+ val |= WINCONx_BPPMODE_24BPP_RGBx;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ case DRM_FORMAT_BGRX8888:
+ val |= WINCONx_BPPMODE_24BPP_BGRx;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ case DRM_FORMAT_ARGB8888:
+ val |= WINCONx_BPPMODE_32BPP_ARGB | WINCONx_BLD_PIX |
+ WINCONx_ALPHA_SEL;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ case DRM_FORMAT_ABGR8888:
+ val |= WINCONx_BPPMODE_32BPP_ABGR | WINCONx_BLD_PIX |
+ WINCONx_ALPHA_SEL;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ case DRM_FORMAT_RGBA8888:
+ val |= WINCONx_BPPMODE_32BPP_RGBA | WINCONx_BLD_PIX |
+ WINCONx_ALPHA_SEL;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ case DRM_FORMAT_BGRA8888:
+ val |= WINCONx_BPPMODE_32BPP_BGRA | WINCONx_BLD_PIX |
+ WINCONx_ALPHA_SEL;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ default:
+ DRM_DEBUG_KMS("invalid pixel size so using unpacked 24bpp.\n");
+
+ val |= WINCONx_BPPMODE_24BPP_xRGB;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ }
+
+ DRM_DEBUG_KMS("bpp = %d\n", win_data->bpp);
+
+ /*
+ * In case of exynos, setting dma-burst to 16Word causes permanent
+ * tearing for very small buffers, e.g. cursor buffer. Burst Mode
+ * switching which is based on overlay size is not recommended as
+ * overlay size varies a lot towards the end of the screen and rapid
+ * movement causes unstable DMA which results into iommu crash/tear.
+ */
+
+ if (win_data->fb_width < MIN_FB_WIDTH_FOR_16WORD_BURST) {
+ val &= ~WINCONx_BURSTLEN_MASK;
+ val |= WINCONx_BURSTLEN_8WORD;
+ }
+
+ writel(val, ctx->regs + WINCON(win));
+}
+
+static void decon_win_set_colkey(struct decon_context *ctx, unsigned int win)
+{
+ unsigned int keycon0 = 0, keycon1 = 0;
+
+ keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F |
+ WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
+
+ keycon1 = WxKEYCON1_COLVAL(0xffffffff);
+
+ writel(keycon0, ctx->regs + WKEYCON0_BASE(win));
+ writel(keycon1, ctx->regs + WKEYCON1_BASE(win));
+}
+
+/**
+ * shadow_protect_win() - disable updating values from shadow registers at vsync
+ *
+ * @win: window to protect registers for
+ * @protect: 1 to protect (disable updates)
+ */
+static void decon_shadow_protect_win(struct decon_context *ctx,
+ int win, bool protect)
+{
+ u32 reg, bits, val;
+
+ reg = SHADOWCON;
+ bits = SHADOWCON_WINx_PROTECT(win);
+
+ val = readl(ctx->regs + reg);
+ if (protect)
+ val |= bits;
+ else
+ val &= ~bits;
+ writel(val, ctx->regs + reg);
+}
+
+static void decon_win_commit(struct exynos_drm_manager *mgr, int zpos)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+ struct decon_win_data *win_data;
+ int win = zpos;
+ unsigned long val, alpha, blendeq;
+ unsigned int last_x;
+ unsigned int last_y;
+
+ if (ctx->suspended)
+ return;
+
+ if (win == DEFAULT_ZPOS)
+ win = ctx->default_win;
+
+ if (win < 0 || win >= WINDOWS_NR)
+ return;
+
+ win_data = &ctx->win_data[win];
+
+ /* If suspended, enable this on resume */
+ if (ctx->suspended) {
+ win_data->resume = true;
+ return;
+ }
+
+ /*
+ * SHADOWCON/PRTCON register is used for enabling timing.
+ *
+ * for example, once only width value of a register is set,
+ * if the dma is started then decon hardware could malfunction so
+ * with protect window setting, the register fields with prefix '_F'
+ * wouldn't be updated at vsync also but updated once unprotect window
+ * is set.
+ */
+
+ /* protect windows */
+ decon_shadow_protect_win(ctx, win, true);
+
+ /* buffer start address */
+ val = (unsigned long)win_data->dma_addr;
+ writel(val, ctx->regs + VIDW_BUF_START(win));
+
+ /* buffer size */
+ writel(win_data->fb_width, ctx->regs + VIDW_WHOLE_X(win));
+ writel(win_data->fb_height, ctx->regs + VIDW_WHOLE_Y(win));
+
+ /* offset from the start of the buffer to read */
+ writel(win_data->offset_x, ctx->regs + VIDW_OFFSET_X(win));
+ writel(win_data->offset_y, ctx->regs + VIDW_OFFSET_Y(win));
+
+ DRM_DEBUG_KMS("start addr = 0x%lx\n",
+ (unsigned long)win_data->dma_addr);
+ DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
+ win_data->ovl_width, win_data->ovl_height);
+
+ /* OSD position */
+ val = VIDOSDxA_TOPLEFT_X(win_data->ovl_x) |
+ VIDOSDxA_TOPLEFT_Y(win_data->ovl_y);
+ writel(val, ctx->regs + VIDOSD_A(win));
+
+ last_x = win_data->ovl_x + win_data->ovl_width;
+ if (last_x)
+ last_x--;
+ last_y = win_data->ovl_y + win_data->ovl_height;
+ if (last_y)
+ last_y--;
+
+ val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y);
+
+ writel(val, ctx->regs + VIDOSD_B(win));
+
+ DRM_DEBUG_KMS("osd pos: tx = %d, ty = %d, bx = %d, by = %d\n",
+ win_data->ovl_x, win_data->ovl_y, last_x, last_y);
+
+ /* OSD alpha */
+ alpha = VIDOSDxC_ALPHA0_R_F(0x0) |
+ VIDOSDxC_ALPHA0_G_F(0x0) |
+ VIDOSDxC_ALPHA0_B_F(0x0);
+
+ writel(alpha, ctx->regs + VIDOSD_C(win));
+
+ alpha = VIDOSDxD_ALPHA1_R_F(0xff) |
+ VIDOSDxD_ALPHA1_G_F(0xff) |
+ VIDOSDxD_ALPHA1_B_F(0xff);
+
+ writel(alpha, ctx->regs + VIDOSD_D(win));
+
+ if (win != 0) {
+ blendeq = BLENDE_A_FUNC(BLENDE_COEF_ONE) |
+ BLENDE_B_FUNC(BLENDE_COEF_ZERO) |
+ BLENDE_P_FUNC(BLENDE_COEF_ZERO) |
+ BLENDE_Q_FUNC(BLENDE_COEF_ZERO);
+
+ writel(blendeq, ctx->regs + BLENDE(win - 1));
+ }
+
+ decon_win_set_pixfmt(ctx, win);
+
+ /* hardware window 0 doesn't support color key. */
+ if (win != 0)
+ decon_win_set_colkey(ctx, win);
+
+ /* wincon */
+ val = readl(ctx->regs + WINCON(win));
+ val |= WINCONx_TRIPLE_BUF_MODE;
+ val |= WINCONx_ENWIN;
+ writel(val, ctx->regs + WINCON(win));
+
+ /* Enable DMA channel and unprotect windows */
+ decon_shadow_protect_win(ctx, win, false);
+
+ val = readl(ctx->regs + DECON_UPDATE);
+ val |= DECON_UPDATE_STANDALONE_F;
+ writel(val, ctx->regs + DECON_UPDATE);
+
+ win_data->enabled = true;
+}
+
+static void decon_win_disable(struct exynos_drm_manager *mgr, int zpos)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+ struct decon_win_data *win_data;
+ int win = zpos;
+ u32 val;
+
+ if (win == DEFAULT_ZPOS)
+ win = ctx->default_win;
+
+ if (win < 0 || win >= WINDOWS_NR)
+ return;
+
+ win_data = &ctx->win_data[win];
+
+ if (ctx->suspended) {
+ /* do not resume this window*/
+ win_data->resume = false;
+ return;
+ }
+
+ /* protect windows */
+ decon_shadow_protect_win(ctx, win, true);
+
+ /* wincon */
+ val = readl(ctx->regs + WINCON(win));
+ val &= ~WINCONx_ENWIN;
+ writel(val, ctx->regs + WINCON(win));
+
+ decon_shadow_protect_win(ctx, win, false);
+
+ win_data->enabled = false;
+}
+
+static void decon_window_suspend(struct exynos_drm_manager *mgr)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+ struct decon_win_data *win_data;
+ int i;
+
+ for (i = 0; i < WINDOWS_NR; i++) {
+ win_data = &ctx->win_data[i];
+ win_data->resume = win_data->enabled;
+ if (win_data->enabled)
+ decon_win_disable(mgr, i);
+ }
+}
+
+static void decon_window_resume(struct exynos_drm_manager *mgr)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+ struct decon_win_data *win_data;
+ int i;
+
+ for (i = 0; i < WINDOWS_NR; i++) {
+ win_data = &ctx->win_data[i];
+ win_data->enabled = win_data->resume;
+ win_data->resume = false;
+ }
+}
+
+static void decon_apply(struct exynos_drm_manager *mgr)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+ struct decon_win_data *win_data;
+ int i;
+
+ for (i = 0; i < WINDOWS_NR; i++) {
+ win_data = &ctx->win_data[i];
+ if (win_data->enabled)
+ decon_win_commit(mgr, i);
+ else
+ decon_win_disable(mgr, i);
+ }
+
+ decon_commit(mgr);
+}
+
+static int decon_reg_reset(struct decon_context *ctx)
+{
+ int tries = RESET_TIMEOUT;
+
+ writel(VIDCON0_SWRESET, ctx->regs + VIDCON0);
+
+ while (tries) {
+ if (!(readl(ctx->regs + VIDCON0) & VIDCON0_SWRESET))
+ break;
+ udelay(10);
+ tries--;
+ }
+
+ if (!tries) {
+ DRM_ERROR("Failed to reset decon\n");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static void decon_cmu_enable(struct decon_context *ctx)
+{
+ writel(~DECON_CMU_ALL_CLKGATE_ENABLE, ctx->regs + DECON_CMU);
+}
+
+static void decon_blend_alpha_bits(struct decon_context *ctx)
+{
+ writel(BLENDCON_NEW_8BIT_ALPHA_VALUE, ctx->regs + BLENDCON);
+}
+
+static void decon_set_vidout(struct decon_context *ctx)
+{
+ writel(VIDOUTCON0_LCD_ON | VIDOUTCON0_RGBIF, ctx->regs + VIDOUTCON0);
+}
+
+static void decon_set_crc(struct decon_context *ctx)
+{
+ u32 val = readl(ctx->regs + CRCCTRL);
+
+ writel(val & ~(CRCCTRL_CRCCLKEN | CRCCTRL_CRCEN | CRCCTRL_CRCSTART_F),
+ ctx->regs + CRCCTRL);
+}
+
+static void decon_set_clkval(struct decon_context *ctx)
+{
+ writel(VCLKCON0_CLKVALUP | VCLKCON0_VCLKFREE, ctx->regs + VCLKCON0);
+}
+
+static void decon_set_fixvclk(struct decon_context *ctx)
+{
+ writel(VIDCON1_VCLK_HOLD, ctx->regs + VIDCON1(0));
+}
+
+static int decon_poweron(struct exynos_drm_manager *mgr)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+ int ret;
+
+ if (!ctx->suspended)
+ return 0;
+
+ ctx->suspended = false;
+
+ pm_runtime_get_sync(ctx->dev);
+
+ ret = clk_prepare_enable(ctx->pclk);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the pclk [%d]\n", ret);
+ goto pclk_err;
+ }
+
+ ret = clk_prepare_enable(ctx->aclk);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the aclk [%d]\n", ret);
+ goto aclk_err;
+ }
+
+ ret = clk_prepare_enable(ctx->eclk);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the eclk [%d]\n", ret);
+ goto eclk_err;
+ }
+
+ ret = clk_prepare_enable(ctx->vclk);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the vclk [%d]\n", ret);
+ goto vclk_err;
+ }
+
+ ret = decon_reg_reset(ctx);
+ if (ret < 0) {
+ DRM_ERROR("Failed to reset decon [%d]\n", ret);
+ goto err;
+ }
+
+ decon_cmu_enable(ctx);
+ decon_blend_alpha_bits(ctx);
+ decon_set_vidout(ctx);
+ decon_set_crc(ctx);
+ decon_set_fixvclk(ctx);
+ decon_set_clkval(ctx);
+
+ /* if vblank was enabled status, enable it again. */
+ if (test_and_clear_bit(0, &ctx->irq_flags)) {
+ ret = decon_enable_vblank(mgr);
+ if (ret) {
+ DRM_ERROR("Failed to re-enable vblank [%d]\n", ret);
+ goto err;
+ }
+ }
+
+ decon_window_resume(mgr);
+
+ decon_apply(mgr);
+
+ return 0;
+
+err:
+ clk_disable_unprepare(ctx->vclk);
+vclk_err:
+ clk_disable_unprepare(ctx->eclk);
+eclk_err:
+ clk_disable_unprepare(ctx->aclk);
+aclk_err:
+ clk_disable_unprepare(ctx->pclk);
+pclk_err:
+ ctx->suspended = true;
+ return ret;
+}
+
+static int decon_poweroff(struct exynos_drm_manager *mgr)
+{
+ struct decon_context *ctx = mgr_to_decon(mgr);
+
+ if (ctx->suspended)
+ return 0;
+
+ /*
+ * We need to make sure that all windows are disabled before we
+ * suspend that connector. Otherwise we might try to scan from
+ * a destroyed buffer later.
+ */
+ decon_window_suspend(mgr);
+
+ clk_disable_unprepare(ctx->vclk);
+ clk_disable_unprepare(ctx->eclk);
+ clk_disable_unprepare(ctx->aclk);
+ clk_disable_unprepare(ctx->pclk);
+
+ pm_runtime_put_sync(ctx->dev);
+
+ ctx->suspended = true;
+ return 0;
+}
+
+static void decon_dpms(struct exynos_drm_manager *mgr, int mode)
+{
+ DRM_DEBUG_KMS("%s, %d\n", __FILE__, mode);
+
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ decon_poweron(mgr);
+ break;
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ case DRM_MODE_DPMS_OFF:
+ decon_poweroff(mgr);
+ break;
+ default:
+ DRM_DEBUG_KMS("unspecified mode %d\n", mode);
+ break;
+ }
+}
+
+static struct exynos_drm_manager_ops decon_manager_ops = {
+ .dpms = decon_dpms,
+ .mode_fixup = decon_mode_fixup,
+ .mode_set = decon_mode_set,
+ .commit = decon_commit,
+ .enable_vblank = decon_enable_vblank,
+ .disable_vblank = decon_disable_vblank,
+ .wait_for_vblank = decon_wait_for_vblank,
+ .win_mode_set = decon_win_mode_set,
+ .win_commit = decon_win_commit,
+ .win_disable = decon_win_disable,
+};
+
+
+static irqreturn_t decon_irq_handler(int irq, void *dev_id)
+{
+ struct decon_context *ctx = (struct decon_context *)dev_id;
+ u32 val;
+
+ val = readl(ctx->regs + VIDINTCON1);
+
+ if (val & VIDINTCON1_INT_FRAME)
+ /* VSYNC interrupt */
+ writel(VIDINTCON1_INT_FRAME, ctx->regs + VIDINTCON1);
+
+ /* check the crtc is detached already from encoder */
+ if (ctx->pipe < 0 || !ctx->manager.drm_dev)
+ goto out;
+
+ drm_handle_vblank(ctx->manager.drm_dev, ctx->pipe);
+ exynos_drm_crtc_finish_pageflip(ctx->manager.drm_dev, ctx->pipe);
+
+ /* set wait vsync event to zero and wake up queue. */
+ if (atomic_read(&ctx->wait_vsync_event)) {
+ atomic_set(&ctx->wait_vsync_event, 0);
+ wake_up(&ctx->wait_vsync_queue);
+ }
+out:
+ return IRQ_HANDLED;
+}
+
+static int decon_bind(struct device *dev, struct device *master, void *data)
+{
+ struct decon_context *ctx = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+ int ret;
+
+ ret = decon_mgr_initialize(&ctx->manager, drm_dev);
+ if (ret) {
+ DRM_ERROR("decon_mgr_initialize failed.\n");
+ return ret;
+ }
+
+ exynos_drm_crtc_create(&ctx->manager);
+ if (ctx->display)
+ exynos_drm_create_enc_conn(drm_dev, ctx->display);
+
+ return 0;
+
+}
+
+static void decon_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct decon_context *ctx = dev_get_drvdata(dev);
+
+ decon_dpms(&ctx->manager, DRM_MODE_DPMS_OFF);
+
+ if (ctx->display)
+ exynos_dpi_remove(ctx->display);
+
+ decon_mgr_remove(&ctx->manager);
+}
+
+static const struct component_ops decon_component_ops = {
+ .bind = decon_bind,
+ .unbind = decon_unbind,
+};
+
+static int decon_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct decon_context *ctx;
+ struct resource *res;
+ int ret = -EINVAL;
+
+ if (!dev->of_node)
+ return -ENODEV;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->manager.type = EXYNOS_DISPLAY_TYPE_LCD;
+ ctx->manager.ops = &decon_manager_ops;
+
+ ret = exynos_drm_component_add(dev, EXYNOS_DEVICE_TYPE_CRTC,
+ ctx->manager.type);
+ if (ret)
+ return ret;
+
+ ctx->dev = dev;
+ ctx->suspended = true;
+
+ ctx->pclk = devm_clk_get(dev, "pclk_decon0");
+ if (IS_ERR(ctx->pclk)) {
+ dev_err(dev, "failed to get bus clock pclk\n");
+ ret = PTR_ERR(ctx->pclk);
+ goto err_del_component;
+ }
+
+ ctx->aclk = devm_clk_get(dev, "aclk_decon0");
+ if (IS_ERR(ctx->aclk)) {
+ dev_err(dev, "failed to get bus clock aclk\n");
+ ret = PTR_ERR(ctx->aclk);
+ goto err_del_component;
+ }
+
+ ctx->eclk = devm_clk_get(dev, "decon0_eclk");
+ if (IS_ERR(ctx->eclk)) {
+ dev_err(dev, "failed to get eclock\n");
+ ret = PTR_ERR(ctx->eclk);
+ goto err_del_component;
+ }
+
+ ctx->vclk = devm_clk_get(dev, "decon0_vclk");
+ if (IS_ERR(ctx->vclk)) {
+ dev_err(dev, "failed to get vclock\n");
+ ret = PTR_ERR(ctx->vclk);
+ goto err_del_component;
+ }
+
+ ctx->regs = of_iomap(dev->of_node, 0);
+ if (IS_ERR(ctx->regs)) {
+ ret = PTR_ERR(ctx->regs);
+ goto err_del_component;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "vsync");
+ if (!res) {
+ dev_err(dev, "irq request failed.\n");
+ ret = -ENXIO;
+ goto err_del_component;
+ }
+
+ ret = devm_request_irq(dev, res->start, decon_irq_handler,
+ 0, "drm_decon", ctx);
+ if (ret) {
+ dev_err(dev, "irq request failed.\n");
+ goto err_del_component;
+ }
+
+ init_waitqueue_head(&ctx->wait_vsync_queue);
+ atomic_set(&ctx->wait_vsync_event, 0);
+
+ platform_set_drvdata(pdev, ctx);
+
+ ctx->display = exynos_dpi_probe(dev);
+ if (IS_ERR(ctx->display)) {
+ ret = PTR_ERR(ctx->display);
+ goto err_del_component;
+ }
+
+ pm_runtime_enable(dev);
+
+ ret = component_add(dev, &decon_component_ops);
+ if (ret)
+ goto err_disable_pm_runtime;
+
+ return ret;
+
+err_disable_pm_runtime:
+ pm_runtime_disable(dev);
+
+err_del_component:
+ exynos_drm_component_del(dev, EXYNOS_DEVICE_TYPE_CRTC);
+ return ret;
+}
+
+static int decon_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ component_del(&pdev->dev, &decon_component_ops);
+ exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC);
+
+ return 0;
+}
+
+struct platform_driver decon_driver = {
+ .probe = decon_probe,
+ .remove = decon_remove,
+ .driver = {
+ .name = "exynos-decon",
+ .owner = THIS_MODULE,
+ .of_match_table = decon_driver_dt_match,
+ },
+};
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index d71fb54..de022d2 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -556,6 +556,9 @@ static struct platform_driver *const exynos_drm_kms_drivers[] = {
#ifdef CONFIG_DRM_EXYNOS_FIMD
&fimd_driver,
#endif
+#ifdef CONFIG_DRM_EXYNOS_DECON
+ &decon_driver,
+#endif
#ifdef CONFIG_DRM_EXYNOS_DP
&dp_driver,
#endif
@@ -612,6 +615,7 @@ static const char * const strings[] = {
"samsung,exynos3",
"samsung,exynos4",
"samsung,exynos5",
+ "samsung,exynos7",
};
static struct platform_driver exynos_drm_platform_driver = {
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
index 2e50634..7ba066d 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
@@ -333,6 +333,7 @@ void exynos_drm_component_del(struct device *dev,
enum exynos_drm_device_type dev_type);
extern struct platform_driver fimd_driver;
+extern struct platform_driver decon_driver;
extern struct platform_driver dp_driver;
extern struct platform_driver dsi_driver;
extern struct platform_driver mixer_driver;
diff --git a/include/video/exynos7_decon.h b/include/video/exynos7_decon.h
new file mode 100644
index 0000000..c50c877
--- /dev/null
+++ b/include/video/exynos7_decon.h
@@ -0,0 +1,346 @@
+/* include/video/exynos7_decon.h
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Ajay Kumar <ajaykumar.rs at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/* VIDCON0 */
+#define VIDCON0 0x00
+
+#define VIDCON0_SWRESET (1 << 28)
+#define VIDCON0_DECON_STOP_STATUS (1 << 2)
+#define VIDCON0_ENVID (1 << 1)
+#define VIDCON0_ENVID_F (1 << 0)
+
+/* VIDOUTCON0 */
+#define VIDOUTCON0 0x4
+
+#define VIDOUTCON0_LCD_ON (0x1 << 24)
+#define VIDOUTCON0_LCD_OFF (0x0 << 24)
+#define VIDOUTCON0_IF_SHIFT 23
+#define VIDOUTCON0_IF_MASK (0x1 << 23)
+#define VIDOUTCON0_RGBIF (0x0 << 23)
+#define VIDOUTCON0_I80IF (0x1 << 23)
+
+/* VIDCON3 */
+#define VIDCON3 0x8
+
+/* VIDCON4 */
+#define VIDCON4 0xC
+#define VIDCON4_FIFOCNT_START_EN (1 << 0)
+
+/* VCLKCON0 */
+#define VCLKCON0 0x10
+#define VCLKCON0_CLKVALUP (1 << 8)
+#define VCLKCON0_VCLKFREE (1 << 0)
+
+/* VCLKCON */
+#define VCLKCON1 0x14
+#define VCLKCON1_CLKVAL_NUM_VCLK(val) (((val) & 0xff) << 0)
+#define VCLKCON2 0x18
+
+/* SHADOWCON */
+#define SHADOWCON 0x30
+
+#define SHADOWCON_WINx_PROTECT(_win) (1 << (10 + (_win)))
+
+/* WINCONx */
+#define WINCON(_win) (0x50 + ((_win) * 4))
+
+#define WINCONx_BUFSTATUS (0x3 << 30)
+#define WINCONx_BUFSEL_MASK (0x3 << 28)
+#define WINCONx_BUFSEL_SHIFT 28
+#define WINCONx_TRIPLE_BUF_MODE (0x1 << 18)
+#define WINCONx_DOUBLE_BUF_MODE (0x0 << 18)
+#define WINCONx_BURSTLEN_16WORD (0x0 << 11)
+#define WINCONx_BURSTLEN_8WORD (0x1 << 11)
+#define WINCONx_BURSTLEN_MASK (0x1 << 11)
+#define WINCONx_BURSTLEN_SHIFT 11
+#define WINCONx_BLD_PLANE (0 << 8)
+#define WINCONx_BLD_PIX (1 << 8)
+#define WINCONx_ALPHA_MUL (1 << 7)
+
+#define WINCONx_BPPMODE_MASK (0xf << 2)
+#define WINCONx_BPPMODE_SHIFT 2
+#define WINCONx_BPPMODE_16BPP_565 (0x8 << 2)
+#define WINCONx_BPPMODE_24BPP_BGRx (0x7 << 2)
+#define WINCONx_BPPMODE_24BPP_RGBx (0x6 << 2)
+#define WINCONx_BPPMODE_24BPP_xBGR (0x5 << 2)
+#define WINCONx_BPPMODE_24BPP_xRGB (0x4 << 2)
+#define WINCONx_BPPMODE_32BPP_BGRA (0x3 << 2)
+#define WINCONx_BPPMODE_32BPP_RGBA (0x2 << 2)
+#define WINCONx_BPPMODE_32BPP_ABGR (0x1 << 2)
+#define WINCONx_BPPMODE_32BPP_ARGB (0x0 << 2)
+#define WINCONx_ALPHA_SEL (1 << 1)
+#define WINCONx_ENWIN (1 << 0)
+
+#define WINCON1_ALPHA_MUL_F (1 << 7)
+#define WINCON2_ALPHA_MUL_F (1 << 7)
+#define WINCON3_ALPHA_MUL_F (1 << 7)
+#define WINCON4_ALPHA_MUL_F (1 << 7)
+
+/* VIDOSDxH: The height for the OSD image(READ ONLY)*/
+#define VIDOSD_H(_x) (0x80 + ((_x) * 4))
+
+/* Frame buffer start addresses: VIDWxxADD0n */
+#define VIDW_BUF_START(_win) (0x80 + ((_win) * 0x10))
+#define VIDW_BUF_START1(_win) (0x84 + ((_win) * 0x10))
+#define VIDW_BUF_START2(_win) (0x88 + ((_win) * 0x10))
+
+#define VIDW_WHOLE_X(_win) (0x0130 + ((_win) * 8))
+#define VIDW_WHOLE_Y(_win) (0x0134 + ((_win) * 8))
+#define VIDW_OFFSET_X(_win) (0x0170 + ((_win) * 8))
+#define VIDW_OFFSET_Y(_win) (0x0174 + ((_win) * 8))
+#define VIDW_BLKOFFSET(_win) (0x01B0 + ((_win) * 4))
+#define VIDW_BLKSIZE(win) (0x0200 + ((_win) * 4))
+
+/* Interrupt controls register */
+#define VIDINTCON2 0x228
+
+#define VIDINTCON1_INTEXTRA1_EN (1 << 1)
+#define VIDINTCON1_INTEXTRA0_EN (1 << 0)
+
+/* Interrupt controls and status register */
+#define VIDINTCON3 0x22C
+
+#define VIDINTCON1_INTEXTRA1_PEND (1 << 1)
+#define VIDINTCON1_INTEXTRA0_PEND (1 << 0)
+
+/* VIDOSDxA ~ VIDOSDxE */
+#define VIDOSD_BASE 0x230
+
+#define OSD_STRIDE 0x20
+
+#define VIDOSD_A(_win) (VIDOSD_BASE + \
+ ((_win) * OSD_STRIDE) + 0x00)
+#define VIDOSD_B(_win) (VIDOSD_BASE + \
+ ((_win) * OSD_STRIDE) + 0x04)
+#define VIDOSD_C(_win) (VIDOSD_BASE + \
+ ((_win) * OSD_STRIDE) + 0x08)
+#define VIDOSD_D(_win) (VIDOSD_BASE + \
+ ((_win) * OSD_STRIDE) + 0x0C)
+#define VIDOSD_E(_win) (VIDOSD_BASE + \
+ ((_win) * OSD_STRIDE) + 0x10)
+
+#define VIDOSDxA_TOPLEFT_X_MASK (0x1fff << 13)
+#define VIDOSDxA_TOPLEFT_X_SHIFT 13
+#define VIDOSDxA_TOPLEFT_X_LIMIT 0x1fff
+#define VIDOSDxA_TOPLEFT_X(_x) (((_x) & 0x1fff) << 13)
+
+#define VIDOSDxA_TOPLEFT_Y_MASK (0x1fff << 0)
+#define VIDOSDxA_TOPLEFT_Y_SHIFT 0
+#define VIDOSDxA_TOPLEFT_Y_LIMIT 0x1fff
+#define VIDOSDxA_TOPLEFT_Y(_x) (((_x) & 0x1fff) << 0)
+
+#define VIDOSDxB_BOTRIGHT_X_MASK (0x1fff << 13)
+#define VIDOSDxB_BOTRIGHT_X_SHIFT 13
+#define VIDOSDxB_BOTRIGHT_X_LIMIT 0x1fff
+#define VIDOSDxB_BOTRIGHT_X(_x) (((_x) & 0x1fff) << 13)
+
+#define VIDOSDxB_BOTRIGHT_Y_MASK (0x1fff << 0)
+#define VIDOSDxB_BOTRIGHT_Y_SHIFT 0
+#define VIDOSDxB_BOTRIGHT_Y_LIMIT 0x1fff
+#define VIDOSDxB_BOTRIGHT_Y(_x) (((_x) & 0x1fff) << 0)
+
+#define VIDOSDxC_ALPHA0_R_F(_x) (((_x) & 0xFF) << 16)
+#define VIDOSDxC_ALPHA0_G_F(_x) (((_x) & 0xFF) << 8)
+#define VIDOSDxC_ALPHA0_B_F(_x) (((_x) & 0xFF) << 0)
+
+#define VIDOSDxD_ALPHA1_R_F(_x) (((_x) & 0xFF) << 16)
+#define VIDOSDxD_ALPHA1_G_F(_x) (((_x) & 0xFF) << 8)
+#define VIDOSDxD_ALPHA1_B_F(_x) (((_x) & 0xFF) >> 0)
+
+/* Window MAP (Color map) */
+#define WINxMAP(_win) (0x340 + ((_win) * 4))
+
+#define WINxMAP_MAP (1 << 24)
+#define WINxMAP_MAP_COLOUR_MASK (0xffffff << 0)
+#define WINxMAP_MAP_COLOUR_SHIFT 0
+#define WINxMAP_MAP_COLOUR_LIMIT 0xffffff
+#define WINxMAP_MAP_COLOUR(_x) ((_x) << 0)
+
+/* Window colour-key control registers */
+#define WKEYCON 0x370
+
+#define WKEYCON0 0x00
+#define WKEYCON1 0x04
+#define WxKEYCON0_KEYBL_EN (1 << 26)
+#define WxKEYCON0_KEYEN_F (1 << 25)
+#define WxKEYCON0_DIRCON (1 << 24)
+#define WxKEYCON0_COMPKEY_MASK (0xffffff << 0)
+#define WxKEYCON0_COMPKEY_SHIFT 0
+#define WxKEYCON0_COMPKEY_LIMIT 0xffffff
+#define WxKEYCON0_COMPKEY(_x) ((_x) << 0)
+#define WxKEYCON1_COLVAL_MASK (0xffffff << 0)
+#define WxKEYCON1_COLVAL_SHIFT 0
+#define WxKEYCON1_COLVAL_LIMIT 0xffffff
+#define WxKEYCON1_COLVAL(_x) ((_x) << 0)
+
+/* color key control register for hardware window 1 ~ 4. */
+#define WKEYCON0_BASE(x) ((WKEYCON + WKEYCON0) + ((x - 1) * 8))
+/* color key value register for hardware window 1 ~ 4. */
+#define WKEYCON1_BASE(x) ((WKEYCON + WKEYCON1) + ((x - 1) * 8))
+
+/* Window KEY Alpha value */
+#define WxKEYALPHA(_win) (0x3A0 + (((_win) - 1) * 0x4))
+
+#define Wx_KEYALPHA_R_F_SHIFT 16
+#define Wx_KEYALPHA_G_F_SHIFT 8
+#define Wx_KEYALPHA_B_F_SHIFT 0
+
+/* Blending equation */
+#define BLENDE(_win) (0x03C0 + ((_win) * 4))
+#define BLENDE_COEF_ZERO 0x0
+#define BLENDE_COEF_ONE 0x1
+#define BLENDE_COEF_ALPHA_A 0x2
+#define BLENDE_COEF_ONE_MINUS_ALPHA_A 0x3
+#define BLENDE_COEF_ALPHA_B 0x4
+#define BLENDE_COEF_ONE_MINUS_ALPHA_B 0x5
+#define BLENDE_COEF_ALPHA0 0x6
+#define BLENDE_COEF_A 0xA
+#define BLENDE_COEF_ONE_MINUS_A 0xB
+#define BLENDE_COEF_B 0xC
+#define BLENDE_COEF_ONE_MINUS_B 0xD
+#define BLENDE_Q_FUNC(_v) ((_v) << 18)
+#define BLENDE_P_FUNC(_v) ((_v) << 12)
+#define BLENDE_B_FUNC(_v) ((_v) << 6)
+#define BLENDE_A_FUNC(_v) ((_v) << 0)
+
+/* Blending equation control */
+#define BLENDCON 0x3D8
+#define BLENDCON_NEW_MASK (1 << 0)
+#define BLENDCON_NEW_8BIT_ALPHA_VALUE (1 << 0)
+#define BLENDCON_NEW_4BIT_ALPHA_VALUE (0 << 0)
+
+/* Interrupt control register */
+#define VIDINTCON0 0x500
+
+#define VIDINTCON0_WAKEUP_MASK (0x3f << 26)
+#define VIDINTCON0_INTEXTRAEN (1 << 21)
+
+#define VIDINTCON0_FRAMESEL0_SHIFT 15
+#define VIDINTCON0_FRAMESEL0_MASK (0x3 << 15)
+#define VIDINTCON0_FRAMESEL0_BACKPORCH (0x0 << 15)
+#define VIDINTCON0_FRAMESEL0_VSYNC (0x1 << 15)
+#define VIDINTCON0_FRAMESEL0_ACTIVE (0x2 << 15)
+#define VIDINTCON0_FRAMESEL0_FRONTPORCH (0x3 << 15)
+
+#define VIDINTCON0_INT_FRAME (1 << 11)
+
+#define VIDINTCON0_FIFOLEVEL_MASK (0x7 << 3)
+#define VIDINTCON0_FIFOLEVEL_SHIFT 3
+#define VIDINTCON0_FIFOLEVEL_EMPTY (0x0 << 3)
+#define VIDINTCON0_FIFOLEVEL_TO25PC (0x1 << 3)
+#define VIDINTCON0_FIFOLEVEL_TO50PC (0x2 << 3)
+#define VIDINTCON0_FIFOLEVEL_FULL (0x4 << 3)
+
+#define VIDINTCON0_FIFOSEL_MAIN_EN (1 << 1)
+#define VIDINTCON0_INT_FIFO (1 << 1)
+
+#define VIDINTCON0_INT_ENABLE (1 << 0)
+
+/* Interrupt controls and status register */
+#define VIDINTCON1 0x504
+
+#define VIDINTCON1_INT_EXTRA (1 << 3)
+#define VIDINTCON1_INT_I80 (1 << 2)
+#define VIDINTCON1_INT_FRAME (1 << 1)
+#define VIDINTCON1_INT_FIFO (1 << 0)
+
+/* VIDCON1 */
+#define VIDCON1(_x) (0x0600 + ((_x) * 0x50))
+#define VIDCON1_LINECNT_GET(_v) (((_v) >> 17) & 0x1fff)
+#define VIDCON1_VCLK_MASK (0x3 << 9)
+#define VIDCON1_VCLK_HOLD (0x0 << 9)
+#define VIDCON1_VCLK_RUN (0x1 << 9)
+#define VIDCON1_VCLK_RUN_VDEN_DISABLE (0x3 << 9)
+#define VIDCON1_RGB_ORDER_O_MASK (0x7 << 4)
+#define VIDCON1_RGB_ORDER_O_RGB (0x0 << 4)
+#define VIDCON1_RGB_ORDER_O_GBR (0x1 << 4)
+#define VIDCON1_RGB_ORDER_O_BRG (0x2 << 4)
+#define VIDCON1_RGB_ORDER_O_BGR (0x4 << 4)
+#define VIDCON1_RGB_ORDER_O_RBG (0x5 << 4)
+#define VIDCON1_RGB_ORDER_O_GRB (0x6 << 4)
+
+/* VIDTCON0 */
+#define VIDTCON0 0x610
+
+#define VIDTCON0_VBPD_MASK (0xffff << 16)
+#define VIDTCON0_VBPD_SHIFT 16
+#define VIDTCON0_VBPD_LIMIT 0xffff
+#define VIDTCON0_VBPD(_x) ((_x) << 16)
+
+#define VIDTCON0_VFPD_MASK (0xffff << 0)
+#define VIDTCON0_VFPD_SHIFT 0
+#define VIDTCON0_VFPD_LIMIT 0xffff
+#define VIDTCON0_VFPD(_x) ((_x) << 0)
+
+/* VIDTCON1 */
+#define VIDTCON1 0x614
+
+#define VIDTCON1_VSPW_MASK (0xffff << 16)
+#define VIDTCON1_VSPW_SHIFT 16
+#define VIDTCON1_VSPW_LIMIT 0xffff
+#define VIDTCON1_VSPW(_x) ((_x) << 16)
+
+/* VIDTCON2 */
+#define VIDTCON2 0x618
+
+#define VIDTCON2_HBPD_MASK (0xffff << 16)
+#define VIDTCON2_HBPD_SHIFT 16
+#define VIDTCON2_HBPD_LIMIT 0xffff
+#define VIDTCON2_HBPD(_x) ((_x) << 16)
+
+#define VIDTCON2_HFPD_MASK (0xffff << 0)
+#define VIDTCON2_HFPD_SHIFT 0
+#define VIDTCON2_HFPD_LIMIT 0xffff
+#define VIDTCON2_HFPD(_x) ((_x) << 0)
+
+/* VIDTCON3 */
+#define VIDTCON3 0x61C
+
+#define VIDTCON3_HSPW_MASK (0xffff << 16)
+#define VIDTCON3_HSPW_SHIFT 16
+#define VIDTCON3_HSPW_LIMIT 0xffff
+#define VIDTCON3_HSPW(_x) ((_x) << 16)
+
+/* VIDTCON4 */
+#define VIDTCON4 0x620
+
+#define VIDTCON4_LINEVAL_MASK (0xfff << 16)
+#define VIDTCON4_LINEVAL_SHIFT 16
+#define VIDTCON4_LINEVAL_LIMIT 0xfff
+#define VIDTCON4_LINEVAL(_x) (((_x) & 0xfff) << 16)
+
+#define VIDTCON4_HOZVAL_MASK (0xfff << 0)
+#define VIDTCON4_HOZVAL_SHIFT 0
+#define VIDTCON4_HOZVAL_LIMIT 0xfff
+#define VIDTCON4_HOZVAL(_x) (((_x) & 0xfff) << 0)
+
+/* LINECNT OP THRSHOLD*/
+#define LINECNT_OP_THRESHOLD 0x630
+
+/* CRCCTRL */
+#define CRCCTRL 0x6C8
+#define CRCCTRL_CRCCLKEN (0x1 << 2)
+#define CRCCTRL_CRCSTART_F (0x1 << 1)
+#define CRCCTRL_CRCEN (0x1 << 0)
+
+/* DECON_CMU */
+#define DECON_CMU 0x704
+
+#define DECON_CMU_ALL_CLKGATE_ENABLE 0x3
+#define DECON_CMU_SE_CLKGATE_ENABLE (0x1 << 2)
+#define DECON_CMU_SFR_CLKGATE_ENABLE (0x1 << 1)
+#define DECON_CMU_MEM_CLKGATE_ENABLE (0x1 << 0)
+
+/* DECON_UPDATE */
+#define DECON_UPDATE 0x710
+
+#define DECON_UPDATE_SLAVE_SYNC (1 << 4)
+#define DECON_UPDATE_STANDALONE_F (1 << 0)
--
1.7.9.5
More information about the dri-devel
mailing list