[PATCH 1/2] drm: tda998x: Protect the page register
Jean-Francois Moine
moinejf at free.fr
Fri Nov 28 23:30:51 PST 2014
As the HDMI registers of the TDA998x chips are accessed by pages,
the page register must be protected.
Signed-off-by: Jean-Francois Moine <moinejf at free.fr>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index d476279..6795f09 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -32,6 +32,7 @@
struct tda998x_priv {
struct i2c_client *cec;
struct i2c_client *hdmi;
+ struct mutex mutex;
uint16_t rev;
uint8_t current_page;
int dpms;
@@ -402,9 +403,10 @@ reg_read_range(struct tda998x_priv *priv, uint16_t reg, char *buf, int cnt)
uint8_t addr = REG2ADDR(reg);
int ret;
+ mutex_lock(&priv->mutex);
ret = set_page(priv, reg);
if (ret < 0)
- return ret;
+ goto out;
ret = i2c_master_send(client, &addr, sizeof(addr));
if (ret < 0)
@@ -414,10 +416,12 @@ reg_read_range(struct tda998x_priv *priv, uint16_t reg, char *buf, int cnt)
if (ret < 0)
goto fail;
- return ret;
+ goto out;
fail:
dev_err(&client->dev, "Error %d reading from 0x%x\n", ret, reg);
+out:
+ mutex_unlock(&priv->mutex);
return ret;
}
@@ -431,13 +435,16 @@ reg_write_range(struct tda998x_priv *priv, uint16_t reg, uint8_t *p, int cnt)
buf[0] = REG2ADDR(reg);
memcpy(&buf[1], p, cnt);
+ mutex_lock(&priv->mutex);
ret = set_page(priv, reg);
if (ret < 0)
- return;
+ goto out;
ret = i2c_master_send(client, buf, cnt + 1);
if (ret < 0)
dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg);
+out:
+ mutex_unlock(&priv->mutex);
}
static int
@@ -459,13 +466,16 @@ reg_write(struct tda998x_priv *priv, uint16_t reg, uint8_t val)
uint8_t buf[] = {REG2ADDR(reg), val};
int ret;
+ mutex_lock(&priv->mutex);
ret = set_page(priv, reg);
if (ret < 0)
- return;
+ goto out;
ret = i2c_master_send(client, buf, sizeof(buf));
if (ret < 0)
dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg);
+out:
+ mutex_unlock(&priv->mutex);
}
static void
@@ -475,13 +485,16 @@ reg_write16(struct tda998x_priv *priv, uint16_t reg, uint16_t val)
uint8_t buf[] = {REG2ADDR(reg), val >> 8, val};
int ret;
+ mutex_lock(&priv->mutex);
ret = set_page(priv, reg);
if (ret < 0)
- return;
+ goto out;
ret = i2c_master_send(client, buf, sizeof(buf));
if (ret < 0)
dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg);
+out:
+ mutex_unlock(&priv->mutex);
}
static void
@@ -1268,6 +1281,8 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
priv->dpms = DRM_MODE_DPMS_OFF;
+ mutex_init(&priv->mutex); /* protect the page access */
+
/* wake up the device: */
cec_write(priv, REG_CEC_ENAMODS,
CEC_ENAMODS_EN_RXSENS | CEC_ENAMODS_EN_HDMI);
--
2.1.3
More information about the dri-devel
mailing list