[PATCH v3 0/3] drm: describe display bus format

[Boris Brezillon]

Hi Laurent,

On Sat, 29 Nov 2014 00:29:10 +0200
Laurent Pinchart <laurent.pinchart at ideasonboard.com> wrote:

> Hi Boris,
> 
> On Thursday 27 November 2014 14:37:50 Boris Brezillon wrote:
> > On Tue, 18 Nov 2014 14:46:17 +0100 Boris Brezillon wrote:
> > > Hello,
> > > 
> > > This series makes use of the MEDIA_BUS_FMT definition to describe how
> > > the data are transmitted to the display.
> > > 
> > > This will allow drivers to configure their output display bus according
> > > to the display capabilities.
> > > For example some display controllers support DPI (or raw RGB) connectors
> > > and need to specify which format will be transmitted on the DPI bus
> > > (RGB444, RGB565, RGB888, ...).
> > > 
> > > This series also adds a field to the panel_desc struct so that one
> > > can specify which format is natevely supported by a panel.
> > 
> > Thierry, Laurent, Dave, can you take a look at this patch series: this
> > is the last missing dependency to get the atmel-hlcdc DRM driver
> > mainlined, and I was expecting to get this driver in 3.19...
> 
> I've reviewed the series, it looks globally fine to me. I just had two small 
> comments on patch 1/3.
> 

Thanks for the review, I'll address your comments in the next version.

Regards,

Boris

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com