[Intel-gfx] [RFC PATCH v2 1/4] drm/i915: add i915_ved.c to setup bridge for VED

Cheng, Yao yao.cheng at intel.com
Wed Oct 22 00:11:21 PDT 2014


> -----Original Message-----
> From: Daniel Vetter [mailto:daniel.vetter at ffwll.ch] On Behalf Of Daniel
> Vetter
> Sent: Tuesday, October 21, 2014 8:09 PM
> To: Cheng, Yao
> Cc: intel-gfx at lists.freedesktop.org; dri-devel at lists.freedesktop.org; Kelley,
> Sean V; Vetter, Daniel; Abel, Michael J; Jiang, Fei; Rao, Ram R
> Subject: Re: [Intel-gfx] [RFC PATCH v2 1/4] drm/i915: add i915_ved.c to setup
> bridge for VED
> 
> On Tue, Oct 21, 2014 at 02:36:41PM +0800, Yao Cheng wrote:
> > Setup minimum required resources during i915_driver_load:
> > 1. Create a platform device to share MMIO/IRQ resources 2. Make the
> > platform device child of i915 device for runtime PM.
> > 3. Create IRQ chip to forward the VED irqs.
> > VED driver (a standalone drm driver) probes the VED device and creates
> > a new dri card on install.
> >
> > Currently only supports VED on valleyview.
> > Kerneldoc is updated for i915_ved.c.
> >
> > Signed-off-by: Yao Cheng <yao.cheng at intel.com>
> 
> Please resend with a patch changelog to account for my review comments.
> And Ville's. Plus cc us both. And if there's anything you didn't address, you
> must reply to the review and we need to further discuss this.
> 

Daniel, I see, thanks for the instruction.
Do you mean resending the [RFC PATCH v2] with changelog and cc list?
Or adding changelog/cc when sending [RFC PATCH v3]?

> Thanks, Daniel
> > ---
> >  Documentation/DocBook/drm.tmpl  |   5 +
> >  drivers/gpu/drm/i915/Makefile   |   3 +
> >  drivers/gpu/drm/i915/i915_dma.c |  11 ++
> >  drivers/gpu/drm/i915/i915_drv.h |   9 ++
> >  drivers/gpu/drm/i915/i915_irq.c |   2 +
> >  drivers/gpu/drm/i915/i915_reg.h |   5 +
> >  drivers/gpu/drm/i915/i915_ved.c | 264
> > ++++++++++++++++++++++++++++++++++++++++
> >  7 files changed, 299 insertions(+)
> >  create mode 100644 drivers/gpu/drm/i915/i915_ved.c
> >
> > diff --git a/Documentation/DocBook/drm.tmpl
> > b/Documentation/DocBook/drm.tmpl index d7cfc98..f1787b4 100644
> > --- a/Documentation/DocBook/drm.tmpl
> > +++ b/Documentation/DocBook/drm.tmpl
> > @@ -3806,6 +3806,11 @@ int num_ioctls;</synopsis>
> > !Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_disable_interrupts
> >  !Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_enable_interrupts
> >        </sect2>
> > +      <sect2>
> > +        <title>VED video core integration</title>
> > +!Pdrivers/gpu/drm/i915/i915_ved.c VED video core integration
> > +!Idrivers/gpu/drm/i915/i915_ved.c
> > +      </sect2>
> >      </sect1>
> >      <sect1>
> >        <title>Display Hardware Handling</title> diff --git
> > a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index
> > 3a6bce0..a4b9252 100644
> > --- a/drivers/gpu/drm/i915/Makefile
> > +++ b/drivers/gpu/drm/i915/Makefile
> > @@ -80,6 +80,9 @@ i915-y += dvo_ch7017.o \  i915-y += i915_dma.o \
> >  	  i915_ums.o
> >
> > +# VED for VLV
> > +i915-y += i915_ved.o
> > +
> >  obj-$(CONFIG_DRM_I915)  += i915.o
> >
> >  CFLAGS_i915_trace_points.o := -I$(src) diff --git
> > a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
> > index 85d14e1..47714e1 100644
> > --- a/drivers/gpu/drm/i915/i915_dma.c
> > +++ b/drivers/gpu/drm/i915/i915_dma.c
> > @@ -1791,6 +1791,13 @@ int i915_driver_load(struct drm_device *dev,
> unsigned long flags)
> >  	if (IS_GEN5(dev))
> >  		intel_gpu_ips_init(dev_priv);
> >
> > +	if (IS_VALLEYVIEW(dev)) {
> > +		ret = vlv_setup_ved(dev);
> > +		if (ret < 0) {
> > +			DRM_ERROR("failed to setup VED bridge: %d\n", ret);
> > +		}
> > +	}
> > +
> >  	intel_runtime_pm_enable(dev_priv);
> >
> >  	return 0;
> > @@ -1833,6 +1840,10 @@ int i915_driver_unload(struct drm_device *dev)
> >  	struct drm_i915_private *dev_priv = dev->dev_private;
> >  	int ret;
> >
> > +	if (IS_VALLEYVIEW(dev)) {
> > +		vlv_teardown_ved(dev);
> > +	}
> > +
> >  	ret = i915_gem_suspend(dev);
> >  	if (ret) {
> >  		DRM_ERROR("failed to idle hardware: %d\n", ret); diff --git
> > a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index 821ba26..952df34 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -1709,6 +1709,10 @@ struct drm_i915_private {
> >
> >  	uint32_t bios_vgacntr;
> >
> > +	/* used for setup VED bridge */
> > +	struct platform_device *ved_platdev;
> > +	int	ved_irq;
> > +
> >  	/* Old dri1 support infrastructure, beware the dragons ya fools
> entering
> >  	 * here! */
> >  	struct i915_dri1_state dri1;
> > @@ -2785,6 +2789,11 @@ void i915_restore_display_reg(struct
> drm_device
> > *dev);  void i915_setup_sysfs(struct drm_device *dev_priv);  void
> > i915_teardown_sysfs(struct drm_device *dev_priv);
> >
> > +/* i915_ved.c */
> > +int vlv_setup_ved(struct drm_device *dev); void
> > +vlv_teardown_ved(struct drm_device *dev); void
> > +vlv_ved_irq_handler(struct drm_device *dev);
> > +
> >  /* intel_i2c.c */
> >  extern int intel_setup_gmbus(struct drm_device *dev);  extern void
> > intel_teardown_gmbus(struct drm_device *dev); diff --git
> > a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> > index 737b239..68c2977 100644
> > --- a/drivers/gpu/drm/i915/i915_irq.c
> > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > @@ -2177,6 +2177,8 @@ static irqreturn_t valleyview_irq_handler(int irq,
> void *arg)
> >  			snb_gt_irq_handler(dev, dev_priv, gt_iir);
> >  		if (pm_iir)
> >  			gen6_rps_irq_handler(dev_priv, pm_iir);
> > +		if (IS_VALLEYVIEW(dev) && (iir &
> VLV_VED_BLOCK_INTERRUPT))
> > +			vlv_ved_irq_handler(dev);
> >  		/* Call regardless, as some status bits might not be
> >  		 * signalled in iir */
> >  		valleyview_pipestat_irq_handler(dev, iir); diff --git
> > a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 2ed02c3..95421ef 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -1284,6 +1284,11 @@ enum punit_power_well {  #define
> > VLV_DISPLAY_BASE 0x180000  #define VLV_MIPI_BASE
> VLV_DISPLAY_BASE
> >
> > +/* forwarding VED irq and sharing MMIO to the VED driver */
> > +#define VLV_VED_BLOCK_INTERRUPT			(1 << 23)
> > +#define VLV_VED_BASE 0x170000
> > +#define VLV_VED_SIZE 0x010000
> > +
> >  #define VLV_GU_CTL0	(VLV_DISPLAY_BASE + 0x2030)
> >  #define VLV_GU_CTL1	(VLV_DISPLAY_BASE + 0x2034)
> >  #define SCPD0		0x0209c /* 915+ only */
> > diff --git a/drivers/gpu/drm/i915/i915_ved.c
> > b/drivers/gpu/drm/i915/i915_ved.c new file mode 100644 index
> > 0000000..5dfe4af
> > --- /dev/null
> > +++ b/drivers/gpu/drm/i915/i915_ved.c
> > @@ -0,0 +1,264 @@
> > +/*
> > + * Copyright (c) 2014 Intel Corporation
> > + *
> > + * Permission is hereby granted, free of charge, to any person
> > +obtaining a
> > + * copy of this software and associated documentation files (the
> > +"Software"),
> > + * to deal in the Software without restriction, including without
> > +limitation
> > + * the rights to use, copy, modify, merge, publish, distribute,
> > +sublicense,
> > + * and/or sell copies of the Software, and to permit persons to whom
> > +the
> > + * Software is furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice (including
> > +the next
> > + * paragraph) shall be included in all copies or substantial portions
> > +of the
> > + * Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
> KIND,
> > +EXPRESS OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> > +MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN
> NO EVENT
> > +SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
> DAMAGES
> > +OR OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> > +ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
> OR
> > +OTHER DEALINGS
> > + * IN THE SOFTWARE.
> > + *
> > + * Authors:
> > + *    Yao Cheng <yao.cheng at intel.com>
> > + *
> > + */
> > +
> > +#include "i915_drv.h"
> > +
> > +/**
> > + * DOC: VED video core integration
> > + *
> > + * Motivation:
> > + * Some platforms (e.g. valleyview) integrates a VED inside GPU to
> > +extend the
> > + * video decoding capability.
> > + * The VED is driven by the standalone drm driver "ipvr" which covers
> > +PowerVR
> > + * VPUs. Since the PowerVR VPUs are also integrated by non-i915
> > +platforms such
> > + * as GMA500, we'd like to keep ipvr driver and i915 driver separated
> > +and
> > + * independent to each other. To achieve this we do the minimum work
> > +in i915
> > + * to setup a bridge between ipvr and i915:
> > + * 1. Create a platform device to share MMIO/IRQ resources
> > + * 2. Make the platform device child of i915 device for runtime PM.
> > + * 3. Create IRQ chip to forward the VED irqs.
> > + * ipvr driver probes the VED device and creates a new dri card on install.
> > + *
> > + * Threats:
> > + * Due to the restriction in Linux platform device model, user need
> > +manually
> > + * uninstall ipvr driver before uninstalling i915 module, otherwise
> > +he might
> > + * run into use-after-free issues after i915 removes the platform device.
> > + *
> > + * Implementation:
> > + * The MMIO/REG platform resources are created according to the
> > +registers
> > + * specification.
> > + * When forwarding VED irqs, the flow control handler selection
> > +depends on the
> > + * platform, for example on valleyview handle_simple_irq is enough.
> > + *
> > + */
> > +
> > +static struct platform_device* vlv_ved_platdev_create(struct
> > +drm_device *dev) {
> > +	int ret;
> > +	struct resource *rsc = NULL;
> > +	struct platform_device *platdev;
> > +	struct drm_i915_private *dev_priv = dev->dev_private;
> > +
> > +	platdev = platform_device_alloc("ipvr-ved-vlv", -1);
> > +	if (!platdev) {
> > +		DRM_ERROR("Failed to allocate VED platform device\n");
> > +		ret = -ENOMEM;
> > +		goto err;
> > +	}
> > +
> > +	rsc = kzalloc(sizeof(*rsc) * 3, GFP_KERNEL);
> > +	if (!rsc) {
> > +		DRM_ERROR("Failed to allocate resource for VED platform
> device\n");
> > +		ret = -ENOMEM;
> > +		goto err;
> > +	}
> > +
> > +	WARN_ON(dev_priv->ved_irq < 0);
> > +	rsc[0].start    = rsc[0].end = dev_priv->ved_irq;
> > +	rsc[0].flags    = IORESOURCE_IRQ;
> > +	rsc[0].name     = "ipvr-ved-vlv-irq";
> > +
> > +	/* MMIO/REG for child's use */
> > +	rsc[1].start    = pci_resource_start(dev->pdev, 0);
> > +	rsc[1].end      = pci_resource_start(dev->pdev, 0) + 2*1024*1024; /*
> gen7 */
> > +	rsc[1].flags    = IORESOURCE_MEM;
> > +	rsc[1].name     = "ipvr-ved-vlv-mmio";
> > +
> > +	rsc[2].start    = VLV_VED_BASE;
> > +	rsc[2].end      = VLV_VED_BASE + VLV_VED_SIZE;
> > +	rsc[2].flags    = IORESOURCE_REG;
> > +	rsc[2].name     = "ipvr-ved-vlv-reg";
> > +
> > +	ret = platform_device_add_resources(platdev, rsc, 3);
> > +	if (ret) {
> > +		DRM_ERROR("Failed to add resource for VED platform
> device: %d\n", ret);
> > +		goto err;
> > +	}
> > +
> > +	/* Runtime-PM hook */
> > +	platdev->dev.parent = dev->dev;
> > +	ret = platform_device_add(platdev);
> > +	if (ret) {
> > +		DRM_ERROR("Failed to add VED platform device: %d\n", ret);
> > +		goto err;
> > +	}
> > +
> > +	kfree(rsc);
> > +	return platdev;
> > +err:
> > +	if (rsc)
> > +		kfree(rsc);
> > +	if (platdev)
> > +		platform_device_unregister(platdev);
> > +	return ERR_PTR(ret);
> > +}
> > +
> > +static void vlv_ved_platdev_destroy(struct drm_device *dev) {
> > +	struct drm_i915_private *dev_priv = dev->dev_private;
> > +	if (dev_priv->ved_platdev)
> > +		platform_device_unregister(dev_priv->ved_platdev);
> > +}
> > +
> > +static void vlv_ved_irq_unmask(struct irq_data *d) {
> > +	struct drm_device *dev = d->chip_data;
> > +	struct drm_i915_private *dev_priv = (struct drm_i915_private *)
> dev->dev_private;
> > +	unsigned long irqflags;
> > +	u32 imr, ier;
> > +	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
> > +
> > +	ier = I915_READ(VLV_IER);
> > +	ier |= VLV_VED_BLOCK_INTERRUPT;
> > +	I915_WRITE(VLV_IER, ier);
> > +	POSTING_READ(VLV_IER);
> > +
> > +	imr = I915_READ(VLV_IMR);
> > +	imr &= ~VLV_VED_BLOCK_INTERRUPT;
> > +	dev_priv->irq_mask = imr;
> > +	I915_WRITE(VLV_IMR, imr);
> > +	POSTING_READ(VLV_IMR);
> > +
> > +	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); }
> > +
> > +static void vlv_ved_irq_mask(struct irq_data *d) {
> > +	struct drm_device *dev = d->chip_data;
> > +	struct drm_i915_private *dev_priv = (struct drm_i915_private *)
> dev->dev_private;
> > +	unsigned long irqflags;
> > +	u32 imr, ier;
> > +	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
> > +
> > +	ier = I915_READ(VLV_IER);
> > +	ier &= ~VLV_VED_BLOCK_INTERRUPT;
> > +	I915_WRITE(VLV_IER, ier);
> > +	POSTING_READ(VLV_IER);
> > +
> > +	imr = I915_READ(VLV_IMR);
> > +	imr |= VLV_VED_BLOCK_INTERRUPT;
> > +	dev_priv->irq_mask = imr;
> > +	I915_WRITE(VLV_IMR, imr);
> > +	POSTING_READ(VLV_IMR);
> > +
> > +	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); }
> > +
> > +static struct irq_chip vlv_ved_irqchip = {
> > +	.name = "ipvr_ved_irqchip",
> > +	.irq_mask = vlv_ved_irq_mask,
> > +	.irq_unmask = vlv_ved_irq_unmask,
> > +};
> > +
> > +int vlv_ved_irq_init(struct drm_device *dev, int irq) {
> > +	struct drm_i915_private *dev_priv = (struct drm_i915_private *)
> dev->dev_private;
> > +	WARN_ON(!intel_irqs_enabled(dev_priv));
> > +	irq_set_chip_and_handler_name(irq,
> > +		&vlv_ved_irqchip,
> > +		handle_simple_irq,
> > +		"ipvr_ved_vlv_irq_handler");
> > +	return irq_set_chip_data(irq, dev);
> > +}
> > +
> > +void vlv_ved_irq_handler(struct drm_device *dev) {
> > +	int ret;
> > +	struct drm_i915_private *dev_priv = dev->dev_private;
> > +	if (dev_priv->ved_irq < 0 && printk_ratelimit()) {
> > +		DRM_ERROR("invalid ved irq number: %d\n", dev_priv-
> >ved_irq);
> > +		return;
> > +	}
> > +	ret = generic_handle_irq(dev_priv->ved_irq);
> > +	if (ret && printk_ratelimit()) {
> > +		DRM_ERROR("error handling vlv ved irq: %d\n", ret);
> > +	}
> > +}
> > +
> > +/**
> > + * vlv_setup_ved() - setup the bridge between VED driver and i915
> > + * @dev: the i915 drm device
> > + *
> > + * set up the minimum required resources for the bridge: irq chip,
> > +platform
> > + * resource and platform device. i915 device is set as parent of the
> > +new
> > + * platform device.
> > + *
> > + * Return: 0 if successful. non-zero if allocation/initialization
> > +fails  */ int vlv_setup_ved(struct drm_device *dev) {
> > +	int irq;
> > +	int ret;
> > +	struct drm_i915_private *dev_priv = dev->dev_private;
> > +	struct platform_device *platdev;
> > +	dev_priv->ved_irq = -1;
> > +	dev_priv->ved_platdev = NULL;
> > +
> > +	irq = irq_alloc_descs(-1, 0, 1, 0);
> > +	if (irq < 0) {
> > +		DRM_ERROR("Failed to allocate IRQ desc: %d\n", irq);
> > +		ret = -ENOMEM;
> > +		goto err;
> > +	}
> > +
> > +	ret = vlv_ved_irq_init(dev, irq);
> > +	if (ret) {
> > +		DRM_ERROR("Failed to initialize irqchip for vlv-ved: %d\n",
> ret);
> > +		goto err;
> > +	}
> > +	dev_priv->ved_irq = irq;
> > +
> > +	platdev = vlv_ved_platdev_create(dev);
> > +	if (IS_ERR(platdev)) {
> > +		DRM_ERROR("Failed to create platform device for vlv-
> ved: %ld\n", PTR_ERR(platdev));
> > +		ret = -EINVAL;
> > +		goto err;
> > +	}
> > +
> > +	dev_priv->ved_platdev = platdev;
> > +	return 0;
> > +err:
> > +	vlv_teardown_ved(dev);
> > +	return ret;
> > +}
> > +
> > +/**
> > + * vlv_teardown_ved() - destroy the bridge between VED driver and
> > +i915
> > + * @dev: the i915 drm device
> > + *
> > + * release all the resources for VED <-> i915 bridge.
> > + */
> > +void vlv_teardown_ved(struct drm_device *dev) {
> > +	struct drm_i915_private *dev_priv = dev->dev_private;
> > +	vlv_ved_platdev_destroy(dev);
> > +	dev_priv->ved_platdev = NULL;
> > +	if (dev_priv->ved_irq >= 0) {
> > +		irq_free_desc(dev_priv->ved_irq);
> > +	}
> > +	dev_priv->ved_irq = -1;
> > +}
> > --
> > 1.9.1
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch


More information about the dri-devel mailing list