[PATCH] drm/radeon: bogus PCI ID

[Mark Kettenis]

All evidence I can find suggests that device ID 0x4c6e is the
"secondary" device for the Radeon Mobility 9000/M9.  As such it would
be an RV250 chip instead of RV280.  However, the radeon drm driver
doesn't actually handle "secondary" devices.  For example, the
(non-Mobility) Radeon 9000 with device ID 496e isn't listed.  So I
believe this specific device ID should be removed from the list.  All
it currently accomplishes is printing "Fatal error during GPU init"
after the driver fails to map PCI BAR 2, which isn't there on these
"secondary" devices.

Tested (on OpenBSD) on a FireMV 2400 PCI card, which is essentially
two Mobility M9's with a PCI-PCI bridge, and where the two 0x4c6e
secondaries on function 1 are paired with 0x4c66 primaries on function
0.  Hopefully this diff can be applied to the Linux kernel as well
such that we can keep drm_pciids.h in sync between the various OSes.

Thanks,

Mark


diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index e973540..2dd405c 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -74,7 +74,6 @@
 	{0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
-	{0x1002, 0x4C6E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
 	{0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
 	{0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \