[PATCH] video: fix composite video connector compatible string

Laurent Pinchart laurent.pinchart at ideasonboard.com
Tue Sep 2 14:13:05 PDT 2014


Hi Tomi,

Thank you for the patch.

On Tuesday 02 September 2014 10:35:46 Tomi Valkeinen wrote:
> The quite-recently-added analog-tv-connector bindings say that the
> compatible string for composite video connector is
> "composite-connector". That string is also used in the omap3-n900.dts
> file. However, the connector driver uses "composite-video-connector", so
> this has never worked.
> 
> While changing the driver's compatible string to "composite-connector"
> would be safer, as published DT bindings should not be changed, I'd
> rather fix the bindings in this case for two reasons:
> 
> * composite-connector is a bit too generic name, as it doesn't even hint
>   at video.
> * it's clear that this has never worked, which means no one has used
>   those bindings, which should make it safe to change this.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
> Reported-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
>  Documentation/devicetree/bindings/video/analog-tv-connector.txt | 4 ++--
>  arch/arm/boot/dts/omap3-n900.dts                                | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/video/analog-tv-connector.txt
> b/Documentation/devicetree/bindings/video/analog-tv-connector.txt index
> 0218fcdc1299..0c0970c210ab 100644
> --- a/Documentation/devicetree/bindings/video/analog-tv-connector.txt
> +++ b/Documentation/devicetree/bindings/video/analog-tv-connector.txt
> @@ -2,7 +2,7 @@ Analog TV Connector
>  ===================
> 
>  Required properties:
> -- compatible: "composite-connector" or "svideo-connector"
> +- compatible: "composite-video-connector" or "svideo-connector"
> 
>  Optional properties:
>  - label: a symbolic name for the connector
> @@ -14,7 +14,7 @@ Example
>  -------
> 
>  tv: connector {
> -	compatible = "composite-connector";
> +	compatible = "composite-video-connector";
>  	label = "tv";
> 
>  	port {
> diff --git a/arch/arm/boot/dts/omap3-n900.dts
> b/arch/arm/boot/dts/omap3-n900.dts index 1fe45d1f75ec..4361777a08d8 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -93,7 +93,7 @@
>  	};
> 
>  	tv: connector {
> -		compatible = "composite-connector";
> +		compatible = "composite-video-connector";
>  		label = "tv";
> 
>  		port {

-- 
Regards,

Laurent Pinchart



More information about the dri-devel mailing list