[PATCH v3 1/5] clk: ti: add "ti, gpio-gate-clock" controlled clock

[Nishanth Menon]

On 09/19/2014 08:07 AM, Tomi Valkeinen wrote:
> On 16/09/14 23:40, Jyri Sarha wrote:
>> The added ti,gpio-gate-clock is a basic clock that can be enabled and
>> disabled trough a gpio output. The DT binding document for the clock
>> is also added. For EPROBE_DEFER handling the registering of the clock
>> has to be delayed until of_clk_get() call time.
>>
>> Signed-off-by: Jyri Sarha <jsarha at ti.com>
>> ---
>>  .../bindings/clock/ti/gpio-gate-clock.txt          |   21 ++
>>  drivers/clk/ti/Makefile                            |    2 +-
>>  drivers/clk/ti/gpio.c                              |  202 ++++++++++++++++++++
>>  3 files changed, 224 insertions(+), 1 deletion(-)
>>  create mode 100644 Documentation/devicetree/bindings/clock/ti/gpio-gate-clock.txt
>>  create mode 100644 drivers/clk/ti/gpio.c
> 
> Why is this a TI clock? Sounds like a generic one to me.

Like thread: https://lkml.org/lkml/2014/9/5/284 ?
> 
> In any case, this should go through Mike.
> 
yep - should have been posted independent of this series :).



-- 
Regards,
Nishanth Menon