[PATCH 1/2] drm/tegra: Set the dsi lp clk parent and rate

[Andrzej Hajda]

Hi Sean,

On 09/19/2014 09:53 PM, Sean Paul wrote:
> Per NVidia, this clock rate should be around 70MHz in
> order to properly sample reads on data lane 0. In order
> to achieve this rate, we need to reparent the clock from
> clk_m which can only achieve 12MHz. Add parent_lp to the
> dts bindings and set the parent & rate on init.
> 
> Signed-off-by: Sean Paul <seanpaul at chromium.org>
> ---
>  .../devicetree/bindings/gpu/nvidia,tegra20-host1x.txt  | 10 ++++++++--
>  drivers/gpu/drm/tegra/dsi.c                            | 18 ++++++++++++++++++
>  drivers/gpu/drm/tegra/dsi.h                            |  3 +++
>  3 files changed, 29 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
> index b48f4ef..fef2918 100644
> --- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
> +++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
> @@ -191,6 +191,10 @@ of the following host1x client modules:
>    - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
>    - nvidia,edid: supplies a binary EDID blob
>    - nvidia,panel: phandle of a display panel
> +  - clock-names: Can include the following entries:
> +    - lp_parent: The parent clock for lp
> +  - clocks: Must contain an entry for each optional entry in clock-names.

Have you looked at assigned-clocks, assigned-clock-parents,
assigned-clock-rates common clock properties, they seems to fit to this
scenario.

Regards
Andrzej


> +    See ../clocks/clock-bindings.txt for details.
>  
>  - sor: serial output resource
>  
> @@ -360,8 +364,10 @@ Example:
>  			compatible = "nvidia,tegra20-dsi";
>  			reg = <0x54300000 0x00040000>;
>  			clocks = <&tegra_car TEGRA20_CLK_DSI>,
> -				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
> -			clock-names = "dsi", "parent";
> +				 <&tegra_car TEGRA124_CLK_DSIALP>,
> +				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>,
> +				 <&tegra_car TEGRA124_CLK_PLL_P>;
> +			clock-names = "dsi", "lp", "parent", "lp_parent";
>  			resets = <&tegra_car 48>;
>  			reset-names = "dsi";
>  			status = "disabled";
> diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
> index f787445..c0258ae 100644
> --- a/drivers/gpu/drm/tegra/dsi.c
> +++ b/drivers/gpu/drm/tegra/dsi.c
> @@ -837,6 +837,7 @@ static int tegra_dsi_probe(struct platform_device *pdev)
>  	struct tegra_dsi *dsi;
>  	struct resource *regs;
>  	int err;
> +	struct clk *lp_parent;
>  
>  	dsi = devm_kzalloc(&pdev->dev, sizeof(*dsi), GFP_KERNEL);
>  	if (!dsi)
> @@ -879,6 +880,23 @@ static int tegra_dsi_probe(struct platform_device *pdev)
>  		return PTR_ERR(dsi->clk_lp);
>  	}
>  
> +	lp_parent = devm_clk_get(&pdev->dev, "lp_parent");
> +	if (!IS_ERR(lp_parent)) {
> +		err = clk_set_parent(dsi->clk_lp, lp_parent);
> +		if (err < 0) {
> +			dev_err(&pdev->dev, "cannot set lp clock parent\n");
> +			return err;
> +		}
> +	} else {
> +		dev_info(&pdev->dev, "no lp clock parent, using hw default\n");
> +	}
> +
> +	err = clk_set_rate(dsi->clk_lp, DSI_LP_CLK_RATE);
> +	if (err < 0) {
> +		dev_err(&pdev->dev, "cannot set low-power clock rate\n");
> +		return err;
> +	}
> +
>  	err = clk_prepare_enable(dsi->clk_lp);
>  	if (err < 0) {
>  		dev_err(&pdev->dev, "cannot enable low-power clock\n");
> diff --git a/drivers/gpu/drm/tegra/dsi.h b/drivers/gpu/drm/tegra/dsi.h
> index 5ce610d..a332caf 100644
> --- a/drivers/gpu/drm/tegra/dsi.h
> +++ b/drivers/gpu/drm/tegra/dsi.h
> @@ -127,4 +127,7 @@ enum tegra_dsi_format {
>  	TEGRA_DSI_FORMAT_24P,
>  };
>  
> +/* default lp clock rate */
> +#define DSI_LP_CLK_RATE			(70 * 1000 * 1000)
> +
>  #endif
>