[Bug 69721] Can't reach maximum memory speed (or core speed) when using dpm=1 on r600g on cards not sticking to reference board

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=69721

--- Comment #6 from Alexandre Demers <alexandre.f.demers at gmail.com> ---
(In reply to comment #5)
> (In reply to comment #4)
> > (In reply to comment #3)
> > > Did you try again after fixing the vddci setup?
> > 
> > To my knowledge, the memory speed is still limited to 1250 instead of
> > reaching its maximum speed of 1300; the same thing goes for the core clock.
> > I'll need to have a look at the code, but the last time I had a look, we
> > were still calling btc_get_max_clock_from_voltage_dependency_table(), which
> > was limiting the speed to the reference values.
> 
> Right.  I mean have you tried reverting that patch or just skipping the
> calls to btc_get_max_clock_from_voltage_dependency_table().  I think they
> should work fine now that vddci is fixed.

Well that was one of the plans. ;) I'll try it later and let you know.

-- 
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20140922/25d242b7/attachment.html>