[PATCH v3 05/11] drm/i915: remove intel_crtc_cursor_set_obj()
Gustavo Padovan
gustavo at padovan.org
Wed Sep 24 10:20:26 PDT 2014
From: Gustavo Padovan <gustavo.padovan at collabora.co.uk>
Merge it into the plane update_plane() callback and make other
users use the update_plane() functions instead.
The fb != crtc->cursor->fb was already inside intel_crtc_cursor_set_obj()
so we fold intel_crtc_cursor_set_obj() inside intel_commit_cursor_plane()
and merge both paths into one.
Signed-off-by: Gustavo Padovan <gustavo.padovan at collabora.co.uk>
---
drivers/gpu/drm/i915/intel_display.c | 221 +++++++++++++++++------------------
1 file changed, 106 insertions(+), 115 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f91a5b0..a583abd 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8457,109 +8457,6 @@ static bool cursor_size_ok(struct drm_device *dev,
return true;
}
-static int intel_crtc_cursor_set_obj(struct drm_crtc *crtc,
- struct drm_i915_gem_object *obj,
- uint32_t width, uint32_t height)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- enum pipe pipe = intel_crtc->pipe;
- unsigned old_width;
- uint32_t addr;
- int ret;
-
- /* if we want to turn off the cursor ignore width and height */
- if (!obj) {
- DRM_DEBUG_KMS("cursor off\n");
- addr = 0;
- mutex_lock(&dev->struct_mutex);
- goto finish;
- }
-
- /* we only need to pin inside GTT if cursor is non-phy */
- mutex_lock(&dev->struct_mutex);
- if (!INTEL_INFO(dev)->cursor_needs_physical) {
- unsigned alignment;
-
- /*
- * Global gtt pte registers are special registers which actually
- * forward writes to a chunk of system memory. Which means that
- * there is no risk that the register values disappear as soon
- * as we call intel_runtime_pm_put(), so it is correct to wrap
- * only the pin/unpin/fence and not more.
- */
- intel_runtime_pm_get(dev_priv);
-
- /* Note that the w/a also requires 2 PTE of padding following
- * the bo. We currently fill all unused PTE with the shadow
- * page and so we should always have valid PTE following the
- * cursor preventing the VT-d warning.
- */
- alignment = 0;
- if (need_vtd_wa(dev))
- alignment = 64*1024;
-
- ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
- if (ret) {
- DRM_DEBUG_KMS("failed to move cursor bo into the GTT\n");
- intel_runtime_pm_put(dev_priv);
- goto fail_locked;
- }
-
- ret = i915_gem_object_put_fence(obj);
- if (ret) {
- DRM_DEBUG_KMS("failed to release fence for cursor");
- intel_runtime_pm_put(dev_priv);
- goto fail_unpin;
- }
-
- addr = i915_gem_obj_ggtt_offset(obj);
-
- intel_runtime_pm_put(dev_priv);
- } else {
- int align = IS_I830(dev) ? 16 * 1024 : 256;
- ret = i915_gem_object_attach_phys(obj, align);
- if (ret) {
- DRM_DEBUG_KMS("failed to attach phys object\n");
- goto fail_locked;
- }
- addr = obj->phys_handle->busaddr;
- }
-
- finish:
- if (intel_crtc->cursor_bo) {
- if (!INTEL_INFO(dev)->cursor_needs_physical)
- i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
- }
-
- i915_gem_track_fb(intel_crtc->cursor_bo, obj,
- INTEL_FRONTBUFFER_CURSOR(pipe));
- mutex_unlock(&dev->struct_mutex);
-
- old_width = intel_crtc->cursor_width;
-
- intel_crtc->cursor_addr = addr;
- intel_crtc->cursor_bo = obj;
- intel_crtc->cursor_width = width;
- intel_crtc->cursor_height = height;
-
- if (intel_crtc->active) {
- if (old_width != width)
- intel_update_watermarks(crtc);
- intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
- }
-
- intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_CURSOR(pipe));
-
- return 0;
-fail_unpin:
- i915_gem_object_unpin_from_display_plane(obj);
-fail_locked:
- mutex_unlock(&dev->struct_mutex);
- return ret;
-}
-
static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
u16 *blue, uint32_t start, uint32_t size)
{
@@ -11897,7 +11794,8 @@ intel_cursor_plane_disable(struct drm_plane *plane)
BUG_ON(!plane->crtc);
- return intel_crtc_cursor_set_obj(plane->crtc, NULL, 0, 0);
+ return plane->funcs->update_plane(plane, plane->crtc, NULL,
+ 0, 0, 0, 0, 0, 0, 0, 0);
}
static int
@@ -11961,26 +11859,119 @@ intel_commit_cursor_plane(struct drm_plane *plane,
struct intel_plane_state *state)
{
struct drm_crtc *crtc = state->crtc;
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_framebuffer *fb = state->fb;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
- struct drm_i915_gem_object *obj = intel_fb->obj;
- int crtc_w, crtc_h;
+ struct drm_i915_gem_object *obj = intel_fb_obj(fb);
+ enum pipe pipe = intel_crtc->pipe;
+ unsigned old_width;
+ uint32_t addr;
+ bool on;
+ int ret;
crtc->cursor_x = state->orig_dst.x1;
crtc->cursor_y = state->orig_dst.y1;
- if (fb != crtc->cursor->fb) {
- crtc_w = drm_rect_width(&state->orig_dst);
- crtc_h = drm_rect_height(&state->orig_dst);
- return intel_crtc_cursor_set_obj(crtc, obj, crtc_w, crtc_h);
+
+ if (intel_crtc->cursor_bo == obj)
+ goto update;
+
+ /* if we want to turn off the cursor ignore width and height */
+ if (!obj) {
+ DRM_DEBUG_KMS("cursor off\n");
+ addr = 0;
+ mutex_lock(&dev->struct_mutex);
+ goto finish;
+ }
+
+ /* we only need to pin inside GTT if cursor is non-phy */
+ mutex_lock(&dev->struct_mutex);
+ if (!INTEL_INFO(dev)->cursor_needs_physical) {
+ unsigned alignment;
+
+ /*
+ * Global gtt pte registers are special registers which actually
+ * forward writes to a chunk of system memory. Which means that
+ * there is no risk that the register values disappear as soon
+ * as we call intel_runtime_pm_put(), so it is correct to wrap
+ * only the pin/unpin/fence and not more.
+ */
+ intel_runtime_pm_get(dev_priv);
+
+ /* Note that the w/a also requires 2 PTE of padding following
+ * the bo. We currently fill all unused PTE with the shadow
+ * page and so we should always have valid PTE following the
+ * cursor preventing the VT-d warning.
+ */
+ alignment = 0;
+ if (need_vtd_wa(dev))
+ alignment = 64*1024;
+
+ ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
+ if (ret) {
+ DRM_DEBUG_KMS("failed to move cursor bo into the GTT\n");
+ intel_runtime_pm_put(dev_priv);
+ goto fail_locked;
+ }
+
+ ret = i915_gem_object_put_fence(obj);
+ if (ret) {
+ DRM_DEBUG_KMS("failed to release fence for cursor");
+ intel_runtime_pm_put(dev_priv);
+ goto fail_unpin;
+ }
+
+ addr = i915_gem_obj_ggtt_offset(obj);
+
+ intel_runtime_pm_put(dev_priv);
} else {
- intel_crtc_update_cursor(crtc, state->visible);
+ int align = IS_I830(dev) ? 16 * 1024 : 256;
+ ret = i915_gem_object_attach_phys(obj, align);
+ if (ret) {
+ DRM_DEBUG_KMS("failed to attach phys object\n");
+ goto fail_locked;
+ }
+ addr = obj->phys_handle->busaddr;
+ }
- intel_frontbuffer_flip(crtc->dev,
- INTEL_FRONTBUFFER_CURSOR(intel_crtc->pipe));
+finish:
+ if (intel_crtc->cursor_bo) {
+ if (!INTEL_INFO(dev)->cursor_needs_physical)
+ i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
+ }
- return 0;
+ i915_gem_track_fb(intel_crtc->cursor_bo, obj,
+ INTEL_FRONTBUFFER_CURSOR(pipe));
+ mutex_unlock(&dev->struct_mutex);
+
+ intel_crtc->cursor_addr = addr;
+ intel_crtc->cursor_bo = obj;
+update:
+ old_width = intel_crtc->cursor_width;
+
+ intel_crtc->cursor_width = drm_rect_width(&state->orig_dst);
+ intel_crtc->cursor_height = drm_rect_height(&state->orig_dst);
+
+ if (intel_crtc->cursor_bo == obj)
+ on = state->visible;
+ else
+ on = !obj;
+
+ if (intel_crtc->active) {
+ if (old_width != intel_crtc->cursor_width)
+ intel_update_watermarks(crtc);
+ intel_crtc_update_cursor(crtc, on);
}
+
+ intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_CURSOR(pipe));
+
+ return 0;
+fail_unpin:
+ i915_gem_object_unpin_from_display_plane(obj);
+fail_locked:
+ mutex_unlock(&dev->struct_mutex);
+ drm_gem_object_unreference_unlocked(&obj->base);
+ return ret;
}
static int
--
1.9.3
More information about the dri-devel
mailing list