[PATCH v3 1/5] clk: ti: add "ti, gpio-gate-clock" controlled clock

[Mike Turquette]

Quoting Tomi Valkeinen (2014-09-19 06:25:48)
> On 19/09/14 16:12, Nishanth Menon wrote:
> > On 09/19/2014 08:07 AM, Tomi Valkeinen wrote:
> >> On 16/09/14 23:40, Jyri Sarha wrote:
> >>> The added ti,gpio-gate-clock is a basic clock that can be enabled and
> >>> disabled trough a gpio output. The DT binding document for the clock
> >>> is also added. For EPROBE_DEFER handling the registering of the clock
> >>> has to be delayed until of_clk_get() call time.
> >>>
> >>> Signed-off-by: Jyri Sarha <jsarha at ti.com>
> >>> ---
> >>>  .../bindings/clock/ti/gpio-gate-clock.txt          |   21 ++
> >>>  drivers/clk/ti/Makefile                            |    2 +-
> >>>  drivers/clk/ti/gpio.c                              |  202 ++++++++++++++++++++
> >>>  3 files changed, 224 insertions(+), 1 deletion(-)
> >>>  create mode 100644 Documentation/devicetree/bindings/clock/ti/gpio-gate-clock.txt
> >>>  create mode 100644 drivers/clk/ti/gpio.c
> >>
> >> Why is this a TI clock? Sounds like a generic one to me.
> > 
> > Like thread: https://lkml.org/lkml/2014/9/5/284 ?
> 
> Right, I should've read the earlier versions before making any smart
> comments =).

No supporters cropped up for the generic gpio clock, but the design is
common enough to merit a common clock type. And all of that stuff I said
about the machine-specific ops isn't that relevant since it is hidden
behing the gpio api.

Regards,
Mike

> 
>  Tomi
> 
>