[PATCH 6/7] drm/exynos: dsi: move TE irq handler registration position

[YoungJun Cho]

The drm_helper_hpd_irq_event() does dpms control and panel is
initialized and displayed on by it.
So should register TE irq handler(exynos_dsi_te_irq_handler())
beforehand.

Signed-off-by: YoungJun Cho <yj44.cho at samsung.com>
Acked-by: Inki Dae <inki.dae at samsung.com>
Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
---
 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 24741d8..ded69df 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1143,6 +1143,7 @@ static int exynos_dsi_init(struct exynos_dsi *dsi)
 static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi)
 {
 	int ret;
+	int te_gpio_irq;
 
 	dsi->te_gpio = of_get_named_gpio(dsi->panel_node, "te-gpios", 0);
 	if (!gpio_is_valid(dsi->te_gpio)) {
@@ -1157,14 +1158,10 @@ static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi)
 		goto out;
 	}
 
-	/*
-	 * This TE GPIO IRQ should not be set to IRQ_NOAUTOEN, because panel
-	 * calls drm_panel_init() first then calls mipi_dsi_attach() in probe().
-	 * It means that te_gpio is invalid when exynos_dsi_enable_irq() is
-	 * called by drm_panel_init() before panel is attached.
-	 */
-	ret = request_threaded_irq(gpio_to_irq(dsi->te_gpio),
-					exynos_dsi_te_irq_handler, NULL,
+	te_gpio_irq = gpio_to_irq(dsi->te_gpio);
+
+	irq_set_status_flags(te_gpio_irq, IRQ_NOAUTOEN);
+	ret = request_threaded_irq(te_gpio_irq, exynos_dsi_te_irq_handler, NULL,
 					IRQF_TRIGGER_RISING, "TE", dsi);
 	if (ret) {
 		dev_err(dsi->dev, "request interrupt failed with %d\n", ret);
@@ -1195,9 +1192,6 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 	dsi->mode_flags = device->mode_flags;
 	dsi->panel_node = device->dev.of_node;
 
-	if (dsi->connector.dev)
-		drm_helper_hpd_irq_event(dsi->connector.dev);
-
 	/*
 	 * This is a temporary solution and should be made by more generic way.
 	 *
@@ -1211,6 +1205,9 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 			return ret;
 	}
 
+	if (dsi->connector.dev)
+		drm_helper_hpd_irq_event(dsi->connector.dev);
+
 	return 0;
 }
 
-- 
1.9.0