[PATCH RFC 002/111] staging: etnaviv: add devicetree bindings

Lucas Stach l.stach at pengutronix.de
Thu Apr 2 08:29:04 PDT 2015


Etnaviv follows the same priciple as imx-drm to have a virtual
master device node to bind all the individual GPU cores together
into one DRM device.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 .../bindings/drm/etnaviv/etnaviv-drm.txt           | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/drm/etnaviv/etnaviv-drm.txt

diff --git a/Documentation/devicetree/bindings/drm/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/drm/etnaviv/etnaviv-drm.txt
new file mode 100644
index 000000000000..e27082bdba0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/etnaviv/etnaviv-drm.txt
@@ -0,0 +1,44 @@
+Etnaviv DRM master device
+================================
+
+The Etnaviv DRM master device is a virtual device needed to list all
+Vivante GPU cores that comprise the GPU subsystem.
+
+Required properties:
+- compatible: Should be "fsl,imx-gpu-subsystem"
+- cores: Should contain a list of phandles pointing to Vivante GPU devices
+
+example:
+
+gpu-subsystem {
+	compatible = "fsl,imx-gpu-subsystem";
+	cores = <&gpu_2d>, <&gpu_3d>;
+};
+
+
+Vivante GPU core devices
+====================
+
+Required properties:
+- compatible: Should be "vivante,gc"
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain the cores interrupt line
+- clocks: should contain one clock for entry in clock-names
+  see Documentation/devicetree/bindings/clock/clock-bindings.txt
+- clock-names:
+   - "bus":    AXI/register clock
+   - "core":   GPU core clock
+   - "shader": Shader clock (only required if GPU has feature PIPE_3D)
+
+example:
+
+gpu_3d: gpu at 00130000 {
+	compatible = "vivante,gc";
+	reg = <0x00130000 0x4000>;
+	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+	         <&clks IMX6QDL_CLK_GPU3D_CORE>,
+	         <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+	clock-names = "bus", "core", "shader";
+};
-- 
2.1.4



More information about the dri-devel mailing list