[PATCH v4 6/8] drm/exynos: dsi: add support for Exynos5433
Hyungwon Hwang
human.hwang at samsung.com
Tue Apr 7 04:57:36 PDT 2015
This patch adds support for Exynos5433 mipi dsi.
Signed-off-by: Hyungwon Hwang <human.hwang at samsung.com>
---
Changes for v2:
- change the author of "drm/exynos: dsi: add support for Exynos5433 SoC" to
Hyungwon Hwang by the previous author's will
Changes for v3:
- Separated from the patch "drm/exynos: dsi: add support for Exynos5433 SoC"
in version 2.
- use defines for more readable code
- fix typos
Changes for v4:
- None
.../devicetree/bindings/video/exynos_dsim.txt | 1 +
drivers/gpu/drm/exynos/Kconfig | 2 +-
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 69 +++++++++++++++++++++-
3 files changed, 68 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt
index 39940ca..8b12bfe 100644
--- a/Documentation/devicetree/bindings/video/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dsim.txt
@@ -6,6 +6,7 @@ Required properties:
"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
+ "samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
- reg: physical base address and length of the registers set for the device
- interrupts: should contain DSI interrupt
- clocks: list of clock specifiers, must contain an entry for each required
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index 3f649ab..4e4182b 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -47,7 +47,7 @@ config DRM_EXYNOS_DPI
config DRM_EXYNOS_DSI
bool "EXYNOS DRM MIPI-DSI driver support"
- depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS7_DECON)
+ depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS5433_DECON || DRM_EXYNOS7_DECON)
select DRM_MIPI_DSI
select DRM_PANEL
default n
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 2d9a249..d1ecd0f 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -131,6 +131,7 @@
#define DSIM_INT_PLL_STABLE (1 << 31)
#define DSIM_INT_SW_RST_RELEASE (1 << 30)
#define DSIM_INT_SFR_FIFO_EMPTY (1 << 29)
+#define DSIM_INT_SFR_HDR_FIFO_EMPTY (1 << 28)
#define DSIM_INT_BTA (1 << 25)
#define DSIM_INT_FRAME_DONE (1 << 24)
#define DSIM_INT_RX_TIMEOUT (1 << 21)
@@ -179,6 +180,8 @@
/* DSIM_PHYCTRL */
#define DSIM_PHYCTRL_ULPS_EXIT(x) (((x) & 0x1ff) << 0)
+#define DSIM_PHYCTRL_B_DPHYCTL_VREG_LP (1 << 30)
+#define DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP (1 << 14)
/* DSIM_PHYTIMING */
#define DSIM_PHYTIMING_LPX(x) ((x) << 8)
@@ -206,7 +209,9 @@
#define DSI_WRITE(dsi, reg, val) writel((val), REG((dsi), (reg)))
#define DSI_READ(dsi, reg) readl(REG((dsi), (reg)))
-static char *clk_names[2] = { "bus_clk", "sclk_mipi" };
+static char *clk_names[5] = { "bus_clk", "sclk_mipi",
+ "phyclk_mipidphy0_bitclkdiv8", "phyclk_mipidphy0_rxclkesc0",
+ "sclk_rgb_vclk_to_dsim0" };
enum exynos_dsi_transfer_type {
EXYNOS_DSI_TX,
@@ -335,6 +340,30 @@ static unsigned int regs[] = {
[DSIM_PHYTIMING2_REG] = 0x6c,
};
+static unsigned int exynos5433_regs[] = {
+ [DSIM_STATUS_REG] = 0x04,
+ [DSIM_SWRST_REG] = 0x0C,
+ [DSIM_CLKCTRL_REG] = 0x10,
+ [DSIM_TIMEOUT_REG] = 0x14,
+ [DSIM_CONFIG_REG] = 0x18,
+ [DSIM_ESCMODE_REG] = 0x1C,
+ [DSIM_MDRESOL_REG] = 0x20,
+ [DSIM_MVPORCH_REG] = 0x24,
+ [DSIM_MHPORCH_REG] = 0x28,
+ [DSIM_MSYNC_REG] = 0x2C,
+ [DSIM_INTSRC_REG] = 0x34,
+ [DSIM_INTMSK_REG] = 0x38,
+ [DSIM_PKTHDR_REG] = 0x3C,
+ [DSIM_PAYLOAD_REG] = 0x40,
+ [DSIM_RXFIFO_REG] = 0x44,
+ [DSIM_FIFOCTRL_REG] = 0x4C,
+ [DSIM_PLLCTRL_REG] = 0x94,
+ [DSIM_PHYCTRL_REG] = 0xA4,
+ [DSIM_PHYTIMING_REG] = 0xB4,
+ [DSIM_PHYTIMING1_REG] = 0xB8,
+ [DSIM_PHYTIMING2_REG] = 0xBC,
+};
+
enum values {
RESET_TYPE,
PLL_TIMER,
@@ -371,6 +400,24 @@ static unsigned int values[] = {
[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0b),
};
+static unsigned int exynos5433_values[] = {
+ [RESET_TYPE] = DSIM_FUNCRST,
+ [PLL_TIMER] = 22200,
+ [STOP_STATE_CNT] = 0xa,
+ [PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x190),
+ [PHYCTRL_VREG_LP] = DSIM_PHYCTRL_B_DPHYCTL_VREG_LP,
+ [PHYCTRL_SLEW_UP] = DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP,
+ [PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x07),
+ [PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0c),
+ [PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x09),
+ [PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x2d),
+ [PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0e),
+ [PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x09),
+ [PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x0b),
+ [PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x10),
+ [PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0c),
+};
+
static struct exynos_dsi_driver_data exynos3_dsi_driver_data = {
.regs = regs,
.plltmr_reg = 0x50,
@@ -416,6 +463,17 @@ static struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
.values = values,
};
+static struct exynos_dsi_driver_data exynos5433_dsi_driver_data = {
+ .regs = exynos5433_regs,
+ .plltmr_reg = 0xa0,
+ .has_clklane_stop = 1,
+ .num_clks = 5,
+ .max_freq = 1500,
+ .wait_for_reset = 0,
+ .num_bits_resol = 12,
+ .values = exynos5433_values,
+};
+
static struct of_device_id exynos_dsi_of_match[] = {
{ .compatible = "samsung,exynos3250-mipi-dsi",
.data = &exynos3_dsi_driver_data },
@@ -425,6 +483,8 @@ static struct of_device_id exynos_dsi_of_match[] = {
.data = &exynos4415_dsi_driver_data },
{ .compatible = "samsung,exynos5410-mipi-dsi",
.data = &exynos5_dsi_driver_data },
+ { .compatible = "samsung,exynos5433-mipi-dsi",
+ .data = &exynos5433_dsi_driver_data },
{ }
};
@@ -1182,13 +1242,16 @@ static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
DSI_WRITE(dsi, DSIM_INTSRC_REG, status);
if (status & DSIM_INT_SW_RST_RELEASE) {
- u32 mask = ~(DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY);
+ u32 mask = ~(DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY |
+ DSIM_INT_SFR_HDR_FIFO_EMPTY | DSIM_INT_FRAME_DONE |
+ DSIM_INT_RX_ECC_ERR | DSIM_INT_SW_RST_RELEASE);
DSI_WRITE(dsi, DSIM_INTMSK_REG, mask);
complete(&dsi->completed);
return IRQ_HANDLED;
}
- if (!(status & (DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY)))
+ if (!(status & (DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY |
+ DSIM_INT_FRAME_DONE | DSIM_INT_PLL_STABLE)))
return IRQ_HANDLED;
if (exynos_dsi_transfer_finish(dsi))
--
1.9.1
More information about the dri-devel
mailing list