[PATCH] drm: bridge: Allow daisy chaining of bridges
Archit Taneja
architt at codeaurora.org
Wed Apr 8 23:12:38 PDT 2015
Allow drm_bridge objects to link to each other in order to form an encoder
chain. The requirement for creating a chain of bridges comes because the
MSM drm driver uses up its encoder and bridge objects for blocks within
the SoC itself. There isn't anything left to use if the SoC display output
is connected to an external encoder IC. Having an additional bridge
connected to the existing bridge helps here. In general, it is possible for
platforms to have multiple devices between the encoder and the
connector/panel that require some sort of configuration.
We create drm bridge helper functions corresponding to each op in
'drm_bridge_funcs'. These helpers call the corresponding 'drm_bridge_funcs'
op for the entire chain of bridges. These helpers are used internally by
drm_atomic_helper.c and drm_crtc_helper.c.
The drm_bridge_enable/pre_enable helpers execute enable/pre_enable ops of the
bridge closet to the encoder, and proceed until the last bridge in the chain
is enabled. The same holds for drm_bridge_mode_set/mode_fixup helpers. The
drm_bridge_disable/post_disable helpers disable the last bridge in the chain
first, and proceed until the first bridge in the chain is disabled.
drm_bridge_attach() remains the same. As before, the driver calling this
function should make sure it has set the links correctly. The order in which
the bridges are connected to each other determines the order in which the
calls are made. One requirement is that every bridge in the chain should point
the parent encoder object. This is required since bridge drivers expect a
valid encoder pointer in drm_bridge. For example, consider a chain where an
encoder's output is connected to bridge1, and bridge1's output is connected to
bridge2:
/* Like before, attach bridge to an encoder */
bridge1->encoder = encoder;
ret = drm_bridge_attach(dev, bridge1);
..
/*
* set the first bridge's 'next' bridge to bridge2, set its encoder
* as bridge1's encoder
*/
bridge1->next = bridge2
bridge2->encoder = bridge1->encoder;
ret = drm_bridge_attach(dev, bridge2);
...
...
This method of bridge chaining isn't intrusive and existing drivers that use
drm_bridge will behave the same way as before. The bridge helpers also cleans
up the atomic and crtc helper files a bit.
Signed-off-by: Archit Taneja <architt at codeaurora.org>
---
drivers/gpu/drm/drm_atomic_helper.c | 29 ++++++----------
drivers/gpu/drm/drm_bridge.c | 68 +++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/drm_crtc_helper.c | 54 +++++++++++------------------
include/drm/drm_crtc.h | 14 ++++++++
4 files changed, 112 insertions(+), 53 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 7e3a52b..0b4574e 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -287,14 +287,11 @@ mode_fixup(struct drm_atomic_state *state)
encoder = conn_state->best_encoder;
funcs = encoder->helper_private;
- if (encoder->bridge && encoder->bridge->funcs->mode_fixup) {
- ret = encoder->bridge->funcs->mode_fixup(
- encoder->bridge, &crtc_state->mode,
- &crtc_state->adjusted_mode);
- if (!ret) {
- DRM_DEBUG_KMS("Bridge fixup failed\n");
- return -EINVAL;
- }
+ ret = drm_bridge_mode_fixup(encoder->bridge, &crtc_state->mode,
+ &crtc_state->adjusted_mode);
+ if (!ret) {
+ DRM_DEBUG_KMS("Bridge fixup failed\n");
+ return -EINVAL;
}
if (funcs->atomic_check) {
@@ -607,8 +604,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
* Each encoder has at most one connector (since we always steal
* it away), so we won't call call disable hooks twice.
*/
- if (encoder->bridge)
- encoder->bridge->funcs->disable(encoder->bridge);
+ drm_bridge_disable(encoder->bridge);
/* Right function depends upon target state. */
if (connector->state->crtc && funcs->prepare)
@@ -618,8 +614,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
else
funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
- if (encoder->bridge)
- encoder->bridge->funcs->post_disable(encoder->bridge);
+ drm_bridge_post_disable(encoder->bridge);
}
for (i = 0; i < ncrtcs; i++) {
@@ -761,9 +756,7 @@ crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *old_state)
*/
funcs->mode_set(encoder, mode, adjusted_mode);
- if (encoder->bridge && encoder->bridge->funcs->mode_set)
- encoder->bridge->funcs->mode_set(encoder->bridge,
- mode, adjusted_mode);
+ drm_bridge_mode_set(encoder->bridge, mode, adjusted_mode);
}
}
@@ -849,16 +842,14 @@ void drm_atomic_helper_commit_post_planes(struct drm_device *dev,
* Each encoder has at most one connector (since we always steal
* it away), so we won't call call enable hooks twice.
*/
- if (encoder->bridge)
- encoder->bridge->funcs->pre_enable(encoder->bridge);
+ drm_bridge_pre_enable(encoder->bridge);
if (funcs->enable)
funcs->enable(encoder);
else
funcs->commit(encoder);
- if (encoder->bridge)
- encoder->bridge->funcs->enable(encoder->bridge);
+ drm_bridge_enable(encoder->bridge);
}
}
EXPORT_SYMBOL(drm_atomic_helper_commit_post_planes);
diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
index d1187e5..b52c387 100644
--- a/drivers/gpu/drm/drm_bridge.c
+++ b/drivers/gpu/drm/drm_bridge.c
@@ -66,6 +66,74 @@ extern int drm_bridge_attach(struct drm_device *dev, struct drm_bridge *bridge)
}
EXPORT_SYMBOL(drm_bridge_attach);
+bool drm_bridge_mode_fixup(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ bool ret = true;
+
+ if (!bridge)
+ return true;
+
+ if (bridge->funcs->mode_fixup)
+ ret = bridge->funcs->mode_fixup(bridge, mode, adjusted_mode);
+
+ return ret & drm_bridge_mode_fixup(bridge->next, mode, adjusted_mode);
+}
+
+void drm_bridge_disable(struct drm_bridge *bridge)
+{
+ if (!bridge)
+ return;
+
+ drm_bridge_disable(bridge->next);
+
+ bridge->funcs->disable(bridge);
+}
+
+void drm_bridge_post_disable(struct drm_bridge *bridge)
+{
+ if (!bridge)
+ return;
+
+ drm_bridge_post_disable(bridge->next);
+
+ bridge->funcs->post_disable(bridge);
+}
+
+void drm_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ if (!bridge)
+ return;
+
+ if (bridge->funcs->mode_set)
+ bridge->funcs->mode_set(bridge, mode, adjusted_mode);
+
+ drm_bridge_mode_set(bridge->next, mode, adjusted_mode);
+}
+
+void drm_bridge_pre_enable(struct drm_bridge *bridge)
+{
+ if (!bridge)
+ return;
+
+ bridge->funcs->pre_enable(bridge);
+
+ drm_bridge_pre_enable(bridge->next);
+}
+
+void drm_bridge_enable(struct drm_bridge *bridge)
+{
+ if (!bridge)
+ return;
+
+ bridge->funcs->enable(bridge);
+
+ drm_bridge_enable(bridge->next);
+}
+
#ifdef CONFIG_OF
struct drm_bridge *of_drm_find_bridge(struct device_node *np)
{
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index b1979e7..a199f49 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -163,16 +163,14 @@ drm_encoder_disable(struct drm_encoder *encoder)
{
struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
- if (encoder->bridge)
- encoder->bridge->funcs->disable(encoder->bridge);
+ drm_bridge_disable(encoder->bridge);
if (encoder_funcs->disable)
(*encoder_funcs->disable)(encoder);
else
(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
- if (encoder->bridge)
- encoder->bridge->funcs->post_disable(encoder->bridge);
+ drm_bridge_post_disable(encoder->bridge);
}
static void __drm_helper_disable_unused_functions(struct drm_device *dev)
@@ -311,13 +309,11 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
if (encoder->crtc != crtc)
continue;
- if (encoder->bridge && encoder->bridge->funcs->mode_fixup) {
- ret = encoder->bridge->funcs->mode_fixup(
- encoder->bridge, mode, adjusted_mode);
- if (!ret) {
- DRM_DEBUG_KMS("Bridge fixup failed\n");
- goto done;
- }
+ ret = drm_bridge_mode_fixup(encoder->bridge,
+ mode, adjusted_mode);
+ if (!ret) {
+ DRM_DEBUG_KMS("Bridge fixup failed\n");
+ goto done;
}
encoder_funcs = encoder->helper_private;
@@ -340,15 +336,13 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
if (encoder->crtc != crtc)
continue;
- if (encoder->bridge)
- encoder->bridge->funcs->disable(encoder->bridge);
+ drm_bridge_disable(encoder->bridge);
encoder_funcs = encoder->helper_private;
/* Disable the encoders as the first thing we do. */
encoder_funcs->prepare(encoder);
- if (encoder->bridge)
- encoder->bridge->funcs->post_disable(encoder->bridge);
+ drm_bridge_post_disable(encoder->bridge);
}
drm_crtc_prepare_encoders(dev);
@@ -373,9 +367,7 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
encoder_funcs = encoder->helper_private;
encoder_funcs->mode_set(encoder, mode, adjusted_mode);
- if (encoder->bridge && encoder->bridge->funcs->mode_set)
- encoder->bridge->funcs->mode_set(encoder->bridge, mode,
- adjusted_mode);
+ drm_bridge_mode_set(encoder->bridge, mode, adjusted_mode);
}
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
@@ -386,14 +378,12 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
if (encoder->crtc != crtc)
continue;
- if (encoder->bridge)
- encoder->bridge->funcs->pre_enable(encoder->bridge);
+ drm_bridge_pre_enable(encoder->bridge);
encoder_funcs = encoder->helper_private;
encoder_funcs->commit(encoder);
- if (encoder->bridge)
- encoder->bridge->funcs->enable(encoder->bridge);
+ drm_bridge_enable(encoder->bridge);
}
/* Store real post-adjustment hardware mode. */
@@ -734,23 +724,19 @@ static void drm_helper_encoder_dpms(struct drm_encoder *encoder, int mode)
struct drm_bridge *bridge = encoder->bridge;
struct drm_encoder_helper_funcs *encoder_funcs;
- if (bridge) {
- if (mode == DRM_MODE_DPMS_ON)
- bridge->funcs->pre_enable(bridge);
- else
- bridge->funcs->disable(bridge);
- }
+ if (mode == DRM_MODE_DPMS_ON)
+ drm_bridge_pre_enable(bridge);
+ else
+ drm_bridge_disable(bridge);
encoder_funcs = encoder->helper_private;
if (encoder_funcs->dpms)
encoder_funcs->dpms(encoder, mode);
- if (bridge) {
- if (mode == DRM_MODE_DPMS_ON)
- bridge->funcs->enable(bridge);
- else
- bridge->funcs->post_disable(bridge);
- }
+ if (mode == DRM_MODE_DPMS_ON)
+ drm_bridge_enable(bridge);
+ else
+ drm_bridge_post_disable(bridge);
}
static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 920e21a..8fced1d 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -893,6 +893,8 @@ struct drm_bridge_funcs {
/**
* struct drm_bridge - central DRM bridge control structure
* @dev: DRM device this bridge belongs to
+ * @encoder: encoder to which this bridge is connected
+ * @next: the next bridge in the encoder chain
* @of_node: device node pointer to the bridge
* @list: to keep track of all added bridges
* @base: base mode object
@@ -902,6 +904,7 @@ struct drm_bridge_funcs {
struct drm_bridge {
struct drm_device *dev;
struct drm_encoder *encoder;
+ struct drm_bridge *next;
#ifdef CONFIG_OF
struct device_node *of_node;
#endif
@@ -1225,6 +1228,17 @@ extern void drm_bridge_remove(struct drm_bridge *bridge);
extern struct drm_bridge *of_drm_find_bridge(struct device_node *np);
extern int drm_bridge_attach(struct drm_device *dev, struct drm_bridge *bridge);
+bool drm_bridge_mode_fixup(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode);
+void drm_bridge_disable(struct drm_bridge *bridge);
+void drm_bridge_post_disable(struct drm_bridge *bridge);
+void drm_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode);
+void drm_bridge_pre_enable(struct drm_bridge *bridge);
+void drm_bridge_enable(struct drm_bridge *bridge);
+
extern int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
const struct drm_encoder_funcs *funcs,
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
More information about the dri-devel
mailing list