[PATCH 2/2] drm/panel: correct minimum hsync length of the HannStar HSD070PWW1 panel
Lucas Stach
l.stach at pengutronix.de
Fri Aug 7 05:48:19 PDT 2015
Am Freitag, den 07.08.2015, 14:43 +0200 schrieb Thierry Reding:
> On Fri, Jun 26, 2015 at 12:27:09PM +0200, Lucas Stach wrote:
> > From: Philipp Zabel <p.zabel at pengutronix.de>
> >
> > According to the data sheet, the minimum horizontal blanking interval
> > is 54 clocks (1 + 52 + 1), but tests with a Nitrogen6X have shown the
> > minimum working horizontal blanking interval to be 60 clocks.
> >
> > Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> > Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> > ---
> > drivers/gpu/drm/panel/panel-simple.c | 7 ++++++-
> > 1 file changed, 6 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> > index dc6a923c89d7..7196b940a928 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -713,7 +713,12 @@ static const struct display_timing hannstar_hsd070pww1_timing = {
> > .hactive = { 1280, 1280, 1280 },
> > .hfront_porch = { 1, 1, 10 },
> > .hback_porch = { 1, 1, 10 },
> > - .hsync_len = { 52, 158, 661 },
> > + /*
> > + * According to the data sheet, the minimum horizontal blanking interval
> > + * is 54 clocks (1 + 52 + 1), but tests with a Nitrogen6X have shown the
> > + * minimum working horizontal blanking interval to be 60 clocks.
> > + */
> > + .hsync_len = { 58, 158, 661 },
>
> 58 != 60, so which one is the truth here?
>
The comment says blanking interval must be at least 60 clocks. Blanking
interval = front_porch + hsync_len + back_porch. Both minimum front and
back porch for this panel are 1 clock, so the values match the comment.
Regards,
Lucas
--
Pengutronix e.K. | Lucas Stach |
Industrial Linux Solutions | http://www.pengutronix.de/ |
More information about the dri-devel
mailing list