[PATCH 1/2] drm: bridge/dw_hdmi: Cache edid data

Sascha Hauer s.hauer at pengutronix.de
Fri Aug 7 06:59:20 PDT 2015


Instead of rereading the edid data each time userspace asks for them
read them once and cache them in the previously unused edid field in
struct dw_hdmi. This makes the code a little bit more efficient.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/gpu/drm/bridge/dw_hdmi.c | 41 +++++++++++++++++++++++++---------------
 1 file changed, 26 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 816d104..8d9b53c 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -117,7 +117,7 @@ struct dw_hdmi {
 
 	int vic;
 
-	u8 edid[HDMI_EDID_LEN];
+	struct edid *edid;
 	bool cable_plugin;
 
 	bool phy_enabled;
@@ -1386,28 +1386,39 @@ dw_hdmi_connector_detect(struct drm_connector *connector, bool force)
 	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
 					     connector);
 
-	return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
-		connector_status_connected : connector_status_disconnected;
+	if (!(hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD))
+		return connector_status_disconnected;
+
+	if (hdmi->ddc) {
+		if (hdmi->edid) {
+			drm_mode_connector_update_edid_property(connector,
+					NULL);
+			kfree(hdmi->edid);
+		}
+
+		hdmi->edid = drm_get_edid(connector, hdmi->ddc);
+		if (hdmi->edid) {
+			drm_mode_connector_update_edid_property(connector,
+					hdmi->edid);
+
+			dev_dbg(hdmi->dev, "got edid: width[%d] x height[%d]\n",
+					hdmi->edid->width_cm,
+					hdmi->edid->height_cm);
+		}
+	}
+
+	return connector_status_connected;
 }
 
 static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
 {
 	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
 					     connector);
-	struct edid *edid;
 	int ret = 0;
 
-	if (!hdmi->ddc)
-		return 0;
-
-	edid = drm_get_edid(connector, hdmi->ddc);
-	if (edid) {
-		dev_dbg(hdmi->dev, "got edid: width[%d] x height[%d]\n",
-			edid->width_cm, edid->height_cm);
-
-		drm_mode_connector_update_edid_property(connector, edid);
-		ret = drm_add_edid_modes(connector, edid);
-		kfree(edid);
+	if (hdmi->edid) {
+		ret = drm_add_edid_modes(connector, hdmi->edid);
+		drm_edid_to_eld(connector, hdmi->edid);
 	} else {
 		dev_dbg(hdmi->dev, "failed to get edid\n");
 	}
-- 
2.4.6



More information about the dri-devel mailing list