[PATCH 1/5] drm/msm/dsi: Update generated header file for DSI PHY

[Hai Li]

This change is to update DSI register definition changes
introduced by the following change:

    rnndb/dsi: Add more bits for DSI PHY

    More registers and bit fields are added for PHY timings
    and bitclk source selection.

Signed-off-by: Hai Li <hali at codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi.xml.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
index 0af0981..41c6376 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
@@ -440,6 +440,9 @@ static inline uint32_t DSI_LANE_SWAP_CTRL_DLN_SWAP_SEL(enum dsi_lane_swap val)
 #define REG_DSI_PHY_RESET					0x00000128
 #define DSI_PHY_RESET_RESET					0x00000001
 
+#define REG_DSI_T_CLK_PRE_EXTEND				0x0000017c
+#define DSI_T_CLK_PRE_EXTEND_INC_BY_2_BYTECLK			0x00000001
+
 #define REG_DSI_RDBK_DATA_CTRL					0x000001d0
 #define DSI_RDBK_DATA_CTRL_COUNT__MASK				0x00ff0000
 #define DSI_RDBK_DATA_CTRL_COUNT__SHIFT				16
@@ -835,6 +838,7 @@ static inline uint32_t DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(uint32_t val)
 #define REG_DSI_28nm_PHY_BIST_CTRL_5				0x000001c8
 
 #define REG_DSI_28nm_PHY_GLBL_TEST_CTRL				0x000001d4
+#define DSI_28nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL		0x00000001
 
 #define REG_DSI_28nm_PHY_LDO_CNTRL				0x000001dc
 
@@ -1161,6 +1165,7 @@ static inline uint32_t DSI_20nm_PHY_TIMING_CTRL_11_TRIG3_CMD(uint32_t val)
 #define REG_DSI_20nm_PHY_BIST_CTRL_5				0x000001c8
 
 #define REG_DSI_20nm_PHY_GLBL_TEST_CTRL				0x000001d4
+#define DSI_20nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL		0x00000001
 
 #define REG_DSI_20nm_PHY_LDO_CNTRL				0x000001dc
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation