[PATCH v2] drm/panel: add lg4573 driver

Heiko Schocher hs at denx.de
Thu Aug 13 23:18:13 PDT 2015


Hello Thierry,

Am 13.08.2015 um 14:59 schrieb Thierry Reding:
> On Tue, Jun 09, 2015 at 07:51:22AM +0200, Heiko Schocher wrote:
>> Add support for LG LG4573 480x800 4,3" panel. the LG4573
>> is used on the LG LCD LB043WV2-SD01, an industrial 4.3" TFT
>> panel with SPI control interface.
>>
>> Signed-off-by: Heiko Schocher <hs at denx.de>
>>
>> ---
>>
>> Changes in v2:
>> - add comments from Thierry Reding:
>>    - fix some spelling issues
>>    - remove "power-on-delay"
>>    - remove display timings usage from DT, instead specify the
>>      timing in the driver.
>>    - change config symbol to DRM_PANEL_LG_LG4573
>>    - change filename to panel-lg-lg4573.c
>>    - get rid of power_on_delay
>>    - use cpu_to_be16()
>>    - rework lg4573_spi_write_u16_array()
>>    - introduce lg4573_spi_write_dcs()
>>    - reworked error reporting
>>
>>   .../devicetree/bindings/panel/lg,lg4573.txt        |  19 +
>>   drivers/gpu/drm/panel/Kconfig                      |   8 +
>>   drivers/gpu/drm/panel/Makefile                     |   1 +
>>   drivers/gpu/drm/panel/panel-lg-lg4573.c            | 382 +++++++++++++++++++++
>>   4 files changed, 410 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/panel/lg,lg4573.txt
>>   create mode 100644 drivers/gpu/drm/panel/panel-lg-lg4573.c
>
> There were a couple of review comments that you missed, but I've

Hups ... It seems I missed them :-(

> addressed them while applying. Might be good to give it[0] a spin just
> to make sure I didn't accidentally break anything.

Uh, thank you! Just tested it on the aristainetos2 board, works fine.

bye,
Heiko
>
> Thierry
>
> [0]: git://anongit.freedesktop.org/tegra/linux#drm/panel/for-next
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


More information about the dri-devel mailing list