[RFC 11/13] drm/dp: Add helper to dump DPCD
Jani Nikula
jani.nikula at linux.intel.com
Fri Aug 14 04:56:55 PDT 2015
On Wed, 12 Aug 2015, Thierry Reding <thierry.reding at gmail.com> wrote:
> From: Thierry Reding <treding at nvidia.com>
>
> The new drm_dp_dpcd_dump() helper dumps the contents of a DPCD to a
> seq_file and can be used to make the DPCD available via debugfs for
> example.
See i915/i915_debugfs.c for one DPCD dump implementation.
Around the time that was added, there was also some discussion (and
patches [1]) to expose a read/write debugfs interface to DPCD, letting
userspace access arbitrary DPCD registers.
Just this week there was some discussion about revisiting that. It was
about accessing some proprietary panel features, but there's also the
ease of debugging without having to keep updating the kernel to dump
more.
I think it would be great to agree on a common debugfs interface to
access DPCD arbitrarily. Last time I checked, the blocker to that was
access to the aux channel from generic code; it's always driver
specific. SMOP. ;)
I could put some effort into this (maybe Rafael too?), as long as we
could agree on the interface. As I wrote in the referenced thread, I
wasn't thrilled about what was proposed.
BR,
Jani.
[1] http://mid.gmane.org/1428493301-20293-1-git-send-email-durgadoss.r@intel.com
>
> Signed-off-by: Thierry Reding <treding at nvidia.com>
> ---
> drivers/gpu/drm/drm_dp_helper.c | 146 ++++++++++++++++++++++++++++++++++++++++
> include/drm/drm_dp_helper.h | 2 +
> 2 files changed, 148 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index 8968201ea93c..ea74884c9cb3 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -27,6 +27,7 @@
> #include <linux/errno.h>
> #include <linux/sched.h>
> #include <linux/i2c.h>
> +#include <linux/seq_file.h>
> #include <drm/drm_dp_helper.h>
> #include <drm/drmP.h>
>
> @@ -292,6 +293,151 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
> }
> EXPORT_SYMBOL(drm_dp_dpcd_read_link_status);
>
> +/**
> + * drm_dp_dpcd_dump() - dump DPCD content
> + * @aux: DisplayPort AUX channel
> + * @s: destination for DPCD dump
> + *
> + * Reads registers from the DPCD via a DisplayPort AUX channel and dumps them
> + * to a seq_file.
> + */
> +void drm_dp_dpcd_dump(struct drm_dp_aux *aux, struct seq_file *s)
> +{
> +#define DUMP_REG(aux, offset) ({ \
> + u8 value; \
> + int err; \
> + err = drm_dp_dpcd_readb(aux, offset, &value); \
> + if (err < 0) { \
> + dev_err((aux)->dev, "failed to read %s: %d\n", \
> + #offset, err); \
> + return; \
> + } \
> + seq_printf(s, "%-35s 0x%04x 0x%02x\n", #offset, offset, \
> + value); \
> + })
> +
> + DUMP_REG(aux, DP_DPCD_REV);
> + DUMP_REG(aux, DP_MAX_LINK_RATE);
> + DUMP_REG(aux, DP_MAX_LANE_COUNT);
> + DUMP_REG(aux, DP_MAX_DOWNSPREAD);
> + DUMP_REG(aux, DP_NORP);
> + DUMP_REG(aux, DP_DOWNSTREAMPORT_PRESENT);
> + DUMP_REG(aux, DP_MAIN_LINK_CHANNEL_CODING);
> + DUMP_REG(aux, DP_DOWN_STREAM_PORT_COUNT);
> + DUMP_REG(aux, DP_RECEIVE_PORT_0_CAP_0);
> + DUMP_REG(aux, DP_RECEIVE_PORT_0_BUFFER_SIZE);
> + DUMP_REG(aux, DP_RECEIVE_PORT_1_CAP_0);
> + DUMP_REG(aux, DP_RECEIVE_PORT_1_BUFFER_SIZE);
> + DUMP_REG(aux, DP_I2C_SPEED_CAP);
> + DUMP_REG(aux, DP_EDP_CONFIGURATION_CAP);
> + DUMP_REG(aux, DP_TRAINING_AUX_RD_INTERVAL);
> + DUMP_REG(aux, DP_ADAPTER_CAP);
> + DUMP_REG(aux, DP_SUPPORTED_LINK_RATES);
> + DUMP_REG(aux, DP_FAUX_CAP);
> + DUMP_REG(aux, DP_MSTM_CAP);
> + DUMP_REG(aux, DP_NUMBER_OF_AUDIO_ENDPOINTS);
> + DUMP_REG(aux, DP_AV_GRANULARITY);
> + DUMP_REG(aux, DP_AUD_DEC_LAT0);
> + DUMP_REG(aux, DP_AUD_DEC_LAT1);
> + DUMP_REG(aux, DP_AUD_PP_LAT0);
> + DUMP_REG(aux, DP_AUD_PP_LAT1);
> + DUMP_REG(aux, DP_VID_INTER_LAT);
> + DUMP_REG(aux, DP_VID_PROG_LAT);
> + DUMP_REG(aux, DP_REP_LAT);
> + DUMP_REG(aux, DP_AUD_DEL_INS0);
> + DUMP_REG(aux, DP_AUD_DEL_INS1);
> + DUMP_REG(aux, DP_AUD_DEL_INS2);
> + DUMP_REG(aux, DP_RECEIVER_ALPM_CAP);
> + DUMP_REG(aux, DP_AUD_DEL_INS0);
> + DUMP_REG(aux, DP_GUID);
> + DUMP_REG(aux, DP_PSR_SUPPORT);
> + DUMP_REG(aux, DP_PSR_CAPS);
> + DUMP_REG(aux, DP_DOWNSTREAM_PORT_0);
> + DUMP_REG(aux, DP_LINK_BW_SET);
> + DUMP_REG(aux, DP_LANE_COUNT_SET);
> + DUMP_REG(aux, DP_TRAINING_PATTERN_SET);
> + DUMP_REG(aux, DP_TRAINING_LANE0_SET);
> + DUMP_REG(aux, DP_TRAINING_LANE1_SET);
> + DUMP_REG(aux, DP_TRAINING_LANE2_SET);
> + DUMP_REG(aux, DP_TRAINING_LANE3_SET);
> + DUMP_REG(aux, DP_DOWNSPREAD_CTRL);
> + DUMP_REG(aux, DP_MAIN_LINK_CHANNEL_CODING_SET);
> + DUMP_REG(aux, DP_I2C_SPEED_CONTROL_STATUS);
> + DUMP_REG(aux, DP_EDP_CONFIGURATION_SET);
> + DUMP_REG(aux, DP_LINK_QUAL_LANE0_SET);
> + DUMP_REG(aux, DP_LINK_QUAL_LANE1_SET);
> + DUMP_REG(aux, DP_LINK_QUAL_LANE2_SET);
> + DUMP_REG(aux, DP_LINK_QUAL_LANE3_SET);
> + DUMP_REG(aux, DP_TRAINING_LANE0_1_SET2);
> + DUMP_REG(aux, DP_TRAINING_LANE2_3_SET2);
> + DUMP_REG(aux, DP_MSTM_CTRL);
> + DUMP_REG(aux, DP_AUDIO_DELAY0);
> + DUMP_REG(aux, DP_AUDIO_DELAY1);
> + DUMP_REG(aux, DP_AUDIO_DELAY2);
> + DUMP_REG(aux, DP_LINK_RATE_SET);
> + DUMP_REG(aux, DP_RECEIVER_ALPM_CONFIG);
> + DUMP_REG(aux, DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF);
> + DUMP_REG(aux, DP_UPSTREAM_DEVICE_DP_PWR_NEED);
> + DUMP_REG(aux, DP_AUX_FRAME_SYNC_VALUE);
> + DUMP_REG(aux, DP_PSR_EN_CFG);
> + DUMP_REG(aux, DP_ADAPTER_CTRL);
> + DUMP_REG(aux, DP_BRANCH_DEVICE_CTRL);
> + DUMP_REG(aux, DP_PAYLOAD_ALLOCATE_SET);
> + DUMP_REG(aux, DP_PAYLOAD_ALLOCATE_START_TIME_SLOT);
> + DUMP_REG(aux, DP_PAYLOAD_ALLOCATE_TIME_SLOT_COUNT);
> + DUMP_REG(aux, DP_SINK_COUNT);
> + DUMP_REG(aux, DP_DEVICE_SERVICE_IRQ_VECTOR);
> + DUMP_REG(aux, DP_LANE0_1_STATUS);
> + DUMP_REG(aux, DP_LANE2_3_STATUS);
> + DUMP_REG(aux, DP_LANE_ALIGN_STATUS_UPDATED);
> + DUMP_REG(aux, DP_SINK_STATUS);
> + DUMP_REG(aux, DP_ADJUST_REQUEST_LANE0_1);
> + DUMP_REG(aux, DP_ADJUST_REQUEST_LANE2_3);
> + DUMP_REG(aux, DP_TEST_REQUEST);
> + DUMP_REG(aux, DP_TEST_LINK_RATE);
> + DUMP_REG(aux, DP_TEST_LANE_COUNT);
> + DUMP_REG(aux, DP_TEST_CRC_R_CR);
> + DUMP_REG(aux, DP_TEST_CRC_G_Y);
> + DUMP_REG(aux, DP_TEST_CRC_B_CB);
> + DUMP_REG(aux, DP_TEST_SINK_MISC);
> + DUMP_REG(aux, DP_TEST_RESPONSE);
> + DUMP_REG(aux, DP_TEST_EDID_CHECKSUM);
> + DUMP_REG(aux, DP_TEST_SINK);
> + DUMP_REG(aux, DP_PAYLOAD_TABLE_UPDATE_STATUS);
> + DUMP_REG(aux, DP_VC_PAYLOAD_ID_SLOT_1);
> + DUMP_REG(aux, DP_SOURCE_OUI);
> + DUMP_REG(aux, DP_SINK_OUI);
> + DUMP_REG(aux, DP_BRANCH_OUI);
> + DUMP_REG(aux, DP_SET_POWER);
> + DUMP_REG(aux, DP_EDP_DPCD_REV);
> + DUMP_REG(aux, DP_EDP_GENERAL_CAP_1);
> + DUMP_REG(aux, DP_EDP_BACKLIGHT_ADJUSTMENT_CAP);
> + DUMP_REG(aux, DP_EDP_GENERAL_CAP_2);
> + DUMP_REG(aux, DP_EDP_GENERAL_CAP_3);
> + DUMP_REG(aux, DP_EDP_DISPLAY_CONTROL_REGISTER);
> + DUMP_REG(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
> + DUMP_REG(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
> + DUMP_REG(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_LSB);
> + DUMP_REG(aux, DP_EDP_PWMGEN_BIT_COUNT);
> + DUMP_REG(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN);
> + DUMP_REG(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX);
> + DUMP_REG(aux, DP_EDP_BACKLIGHT_CONTROL_STATUS);
> + DUMP_REG(aux, DP_EDP_BACKLIGHT_FREQ_SET);
> + DUMP_REG(aux, DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MSB);
> + DUMP_REG(aux, DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MID);
> + DUMP_REG(aux, DP_EDP_BACKLIGHT_FREQ_CAP_MIN_LSB);
> + DUMP_REG(aux, DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MSB);
> + DUMP_REG(aux, DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MID);
> + DUMP_REG(aux, DP_EDP_BACKLIGHT_FREQ_CAP_MAX_LSB);
> + DUMP_REG(aux, DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET);
> + DUMP_REG(aux, DP_EDP_DBC_MAXIMUM_BRIGHTNESS_SET);
> + DUMP_REG(aux, DP_EDP_REGIONAL_BACKLIGHT_BASE);
> + DUMP_REG(aux, DP_EDP_REGIONAL_BACKLIGHT_0);
> +
> +#undef DUMP_REG
> +}
> +EXPORT_SYMBOL(drm_dp_dpcd_dump);
> +
> static void drm_dp_link_reset(struct drm_dp_link *link)
> {
> if (!link)
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index d041bb00d6a0..089d274f857d 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -754,6 +754,8 @@ static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux,
> int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
> u8 status[DP_LINK_STATUS_SIZE]);
>
> +void drm_dp_dpcd_dump(struct drm_dp_aux *aux, struct seq_file *s);
> +
> /**
> * struct drm_dp_link_train_set - link training settings
> * @voltage_swing: per-lane voltage swing
> --
> 2.4.5
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Jani Nikula, Intel Open Source Technology Center
More information about the dri-devel
mailing list