[PATCH v3 11/14] drm: bridge: analogix_dp: try force hpd after plug in lookup failed

Yakir Yang ykk at rock-chips.com
Wed Aug 19 07:51:59 PDT 2015


Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.

This is an hardware property, so we need add a devicetree property
"analogix,need-force-hpd" to indicate this sutiation.

Signed-off-by: Yakir Yang <ykk at rock-chips.com>
---
Changes in v3:
- Add "analogix,need-force-hpd" to indicate whether driver need foce
  hpd when hpd detect failed.

Changes in v2: None

 .../devicetree/bindings/drm/bridge/analogix_dp.txt |  3 ++
 .../bindings/video/analogix_dp-rockchip.txt        |  1 +
 .../devicetree/bindings/video/exynos_dp.txt        |  1 +
 drivers/gpu/drm/bridge/analogix_dp_core.c          | 36 +++++++++++++++++++---
 drivers/gpu/drm/bridge/analogix_dp_core.h          |  2 ++
 drivers/gpu/drm/bridge/analogix_dp_reg.c           |  9 ++++++
 6 files changed, 47 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
index 6127018..b043200 100644
--- a/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
@@ -40,6 +40,9 @@ Required properties for dp-controller:
 		* Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
 
 Optional properties for dp-controller:
+	-analogix,need-force-hpd:
+		Indicate driver need force hpd when hpd detect failed, this
+		is used for some eDP screen which don't have hpd signal.
 	-analogix,hpd-gpio:
 		Hotplug detect GPIO.
 			Indicates which GPIO should be used for hotplug
diff --git a/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
index 99fd421..752005e 100644
--- a/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+++ b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
@@ -27,6 +27,7 @@ For the below properties, please refer to Analogix DP binding document:
 - analogix,color-depth (required)
 - analogix,link-rate (required)
 - analogix,lane-count (required)
+- analogix,need-force-hpd (optional)
 - analogix,hpd-gpio (optional)
 - video interfaces (optional)
 -------------------------------------------------------------------------------
diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 177506f..ba20416 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -53,6 +53,7 @@ For the below properties, please refer to Analogix DP binding document:
 	-analogix,color-depth (required)
 	-analogix,link-rate (required)
 	-analogix,lane-count (required)
+	-analogix,need-force-hpd (optional)
 	-analogix,hpd-gpio (optional)
 	-video interfaces (optional)
 -------------------------------------------------------------------------------
diff --git a/drivers/gpu/drm/bridge/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix_dp_core.c
index 1778e0a..99870f7 100644
--- a/drivers/gpu/drm/bridge/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix_dp_core.c
@@ -63,15 +63,38 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
 {
 	int timeout_loop = 0;
 
-	while (analogix_dp_get_plug_in_status(dp) != 0) {
+	while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+		if (analogix_dp_get_plug_in_status(dp) == 0)
+			return 0;
+
 		timeout_loop++;
-		if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
-			dev_err(dp->dev, "failed to get hpd plug status\n");
-			return -ETIMEDOUT;
-		}
 		usleep_range(10, 11);
 	}
 
+	/*
+	 * Some edp screen do not have hpd signal, so we can't just
+	 * return failed when hpd plug in detect failed, DT property
+	 * "need-force-hpd" would indicate whether driver need this.
+	 */
+	if (!dp->need_force_hpd)
+		return -ETIMEDOUT;
+
+	/*
+	 * The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+	 * will not work, so we need to give a force hpd action to
+	 * set HPD_STATUS manually.
+	 */
+	dev_dbg(dp->dev, "failed to get hpd plug status, try to force hpd\n");
+
+	analogix_dp_force_hpd(dp);
+
+	if (analogix_dp_get_plug_in_status(dp) != 0) {
+		dev_err(dp->dev, "failed to get hpd plug in status\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dp->dev, "success to get plug in status after force hpd\n");
+
 	return 0;
 }
 
@@ -1272,6 +1295,9 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 	if (IS_ERR(dp->reg_base))
 		return PTR_ERR(dp->reg_base);
 
+	dp->need_force_hpd =
+		of_property_read_bool(dev->of_node, "analogix,need-force-hpd");
+
 	dp->hpd_gpio = of_get_named_gpio(dev->of_node, "analogix,hpd-gpio", 0);
 
 	if (gpio_is_valid(dp->hpd_gpio)) {
diff --git a/drivers/gpu/drm/bridge/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix_dp_core.h
index 941b34f..2405155 100644
--- a/drivers/gpu/drm/bridge/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix_dp_core.h
@@ -160,6 +160,7 @@ struct analogix_dp_device {
 	struct phy		*phy;
 	int			dpms_mode;
 	int			hpd_gpio;
+	bool                    need_force_hpd;
 
 	struct analogix_dp_plat_data *plat_data;
 };
@@ -180,6 +181,7 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
 				       bool enable);
 void analogix_dp_init_analog_func(struct analogix_dp_device *dp);
 void analogix_dp_init_hpd(struct analogix_dp_device *dp);
+void analogix_dp_force_hpd(struct analogix_dp_device *dp);
 enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp);
 void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp);
 void analogix_dp_reset_aux(struct analogix_dp_device *dp);
diff --git a/drivers/gpu/drm/bridge/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix_dp_reg.c
index a0fc1fb..bf7cee1 100644
--- a/drivers/gpu/drm/bridge/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix_dp_reg.c
@@ -365,6 +365,15 @@ void analogix_dp_init_hpd(struct analogix_dp_device *dp)
 	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
 }
 
+void analogix_dp_force_hpd(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	reg = (F_HPD | HPD_CTRL);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+}
+
 enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp)
 {
 	u32 reg;
-- 
1.9.1




More information about the dri-devel mailing list