[PATCH v3 0/14] Add Analogix Core Display Port Driver

Jingoo Han jingoohan1 at gmail.com
Wed Aug 19 22:54:22 PDT 2015


On 2015. 8. 20., at PM 1:29, Archit Taneja <architt at codeaurora.org> wrote:
> 
> Hi,
> 
>> On 08/19/2015 08:18 PM, Yakir Yang wrote:
>> 
>> Hi all,
>>    The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller
>> share the same IP, so a lot of parts can be re-used. I split the common
>> code into bridge directory, then rk3288 and exynos only need to keep
>> some platform code. Cause I can't find the exact IP name of exynos dp
>> controller, so I decide to name dp core driver with "analogix" which I
>> find in rk3288 eDP TRM ;)
>> 
>> Beyond that, there are three light registers setting differents bewteen
>> exynos and rk3288.
>> 1. RK3288 have five special pll resigters which not indicata in exynos
>>    dp controller.
>> 2. The address of DP_PHY_PD(dp phy power manager register) are different
>>    between rk3288 and exynos.
>> 3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp debug
>>    register).
>> 
>> I have verified this series on two kinds of rockchip platform board, one
>> is rk3288 sdk board which connect with a 2K display port monitor, the other
>> is google jerry chromebook which connect with a eDP screen "cnm,n116bgeea2",
>> both of them works rightlly.
>> 
>> I haven't verified the dp function on samsung platform, cause I haven't got
>> exynos boards. I can only ensure that there are no build error on samsung
>> platform, wish some samsung guys help to test. ;)
>> 
>> Thanks,
>> - Yakir
>> 
>> Changes in v3:
>> - Take Thierry Reding suggest, move exynos's video_timing code
>>   to analogix_dp-exynos platform driver, add get_modes method
>>   to struct analogix_dp_plat_data.
>> - Take Heiko suggest, rename some "samsung*" dts propery to "analogix*".
>> - Take Thierry Reding suggest, dynamic parse video timing info from
>>   struct drm_display_mode and struct drm_display_info.
>> - Take Thierry Reding suggest, link_rate and lane_count shouldn't config to
>>   the DT property value directly, but we can take those as hardware limite.
>>   For example, RK3288 only support 4 physical lanes of 2.7/1.62 Gbps/lane,
>>   so DT property would like "link-rate = 0x0a" "lane-count = 4".
>> - Take Heiko suggest, add devicetree binding documents.
>> - Take Thierry Reding suggest, remove sync pol & colorimetry properies
>>   from the new analogix dp driver devicetree binding.
>> - Update the exist exynos dtsi file with the latest DP DT properies.
>> - Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip
>>   dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp
>>   core driver which name to "dp", and leave "pclk_edp" to rockchip dp platform
>>   driver which name to "pclk".
>> - Take Heiko suggest, add devicetree binding document.
>> - Take Heiko suggest, remove "rockchip,panel" DT property, take use of remote
>>   point to get panel node.
>> - Add the new function point analogix_dp_platdata.get_modes init.
>> - Take Heiko suggest, add rockchip dp phy driver,
>>   collect the phy clocks and power control.
>> - Add "analogix,need-force-hpd" to indicate whether driver need foce
>>   hpd when hpd detect failed.
>> - move dp hpd detect to connector detect function.
>> - Add edid modes parse support
>> 
>> Changes in v2:
>> - Take Joe Preches advise, improved commit message more readable, and
>>   avoid using some uncommon style like bellow:
>>   -  retval = exynos_dp_read_bytes_from_i2c(...
>>                ...)
>>   +  retval =
>>   +  exynos_dp_read_bytes_from_i2c(......);
>> - Take Jingoo Han suggest, just remove my name from author list.
>> - Take Jingoo Han suggest, remove new copyright
>> - Fix compiled failed dut to analogix_dp_device misspell
>> - Take Heiko suggest, get panel node with remote-endpoint method,
>>   and create devicetree binding for driver.
>> - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
>>   leave those clock to rockchip dp phy driver.
>> - Add GNU license v2 declared and samsung copyright
>> - Fix compile failed dut to phy_pd_addr variable misspell error
>> 
>> Yakir Yang (14):
>>   drm: exynos/dp: fix code style
>>   drm: exynos/dp: convert to drm bridge mode
>>   drm: bridge: analogix_dp: split exynos dp driver to bridge dir
>>   drm: bridge/analogix_dp: dynamic parse sync_pol & interlace &
>>     colorimetry
>>   drm: bridge/analogix_dp: fix link_rate & lane_count bug
>>   Documentation: drm/bridge: add document for analogix_dp
>>   drm: rockchip/dp: add rockchip platform dp driver
>>   phy: Add driver for rockchip Display Port PHY
>>   drm: bridge/analogix_dp: add platform device type support
>>   drm: bridge: analogix_dp: add some rk3288 special registers setting
>>   drm: bridge: analogix_dp: try force hpd after plug in lookup failed
>>   drm: bridge/analogix_dp: expand the delay time for hpd detect
>>   drm: bridge/analogix_dp: move hpd detect to connector detect function
>>   drm: bridge/analogix_dp: add edid modes parse in get_modes method
>> 
>>  .../devicetree/bindings/drm/bridge/analogix_dp.txt |   73 +
>>  .../devicetree/bindings/phy/rockchip-dp-phy.txt    |   26 +
>>  .../bindings/video/analogix_dp-rockchip.txt        |   83 ++
>>  .../devicetree/bindings/video/exynos_dp.txt        |   51 +-
>>  arch/arm/boot/dts/exynos5250-arndale.dts           |   10 +-
>>  arch/arm/boot/dts/exynos5250-smdk5250.dts          |   10 +-
>>  arch/arm/boot/dts/exynos5250-snow.dts              |   12 +-
>>  arch/arm/boot/dts/exynos5250-spring.dts            |   12 +-
>>  arch/arm/boot/dts/exynos5420-peach-pit.dts         |   12 +-
>>  arch/arm/boot/dts/exynos5420-smdk5420.dts          |   10 +-
>>  arch/arm/boot/dts/exynos5800-peach-pi.dts          |   12 +-
>>  drivers/gpu/drm/bridge/Kconfig                     |    5 +
>>  drivers/gpu/drm/bridge/Makefile                    |    1 +
>>  drivers/gpu/drm/bridge/analogix_dp_core.c          | 1382 +++++++++++++++++++
>>  drivers/gpu/drm/bridge/analogix_dp_core.h          |  286 ++++
>>  drivers/gpu/drm/bridge/analogix_dp_reg.c           | 1294 ++++++++++++++++++
>>  .../exynos_dp_reg.h => bridge/analogix_dp_reg.h}   |  270 ++--
>>  drivers/gpu/drm/exynos/Kconfig                     |    5 +-
>>  drivers/gpu/drm/exynos/Makefile                    |    2 +-
>>  drivers/gpu/drm/exynos/analogix_dp-exynos.c        |  347 +++++
>>  drivers/gpu/drm/exynos/exynos_dp_core.c            | 1416 --------------------
>>  drivers/gpu/drm/exynos/exynos_dp_core.h            |  282 ----
>>  drivers/gpu/drm/exynos/exynos_dp_reg.c             | 1263 -----------------
>>  drivers/gpu/drm/rockchip/Kconfig |    9 +
>>  drivers/gpu/drm/rockchip/Makefile                  |    1 +
>>  drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    |  390 ++++++
>>  drivers/phy/Kconfig                                |    7 +
>>  drivers/phy/Makefile                               |    1 +
>>  drivers/phy/phy-rockchip-dp.c                      |  185 +++
>>  include/drm/bridge/analogix_dp.h |   40 +
>>  30 files changed, 4325 insertions(+), 3172 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
>>  create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
>>  create mode 100644 Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
>>  create mode 100644 drivers/gpu/drm/bridge/analogix_dp_core.c
>>  create mode 100644 drivers/gpu/drm/bridge/analogix_dp_core.h
>>  create mode 100644 drivers/gpu/drm/bridge/analogix_dp_reg.c
> 
> Minor comment: Since there are a few files required for the driver,
> could you create a separate folder within drivers/gpu/drm/bridge?

I agree on this opinion.
Thank you. 

Best regards,
Jingoo Han

> Thanks,
> Archit
> 
> -- 
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project


More information about the dri-devel mailing list