[PATCH] rnndb/dsi: Add more bits for DSI PHY

[Samuel Pitoiset]

Hi Hai,

I don't know what those bits are used for, but I'm a bit curious about 
how did you find them?

Also, the next time don't forget to send patches related to envytools to 
nouveau at lists.freedesktop.org
(or better send a pull request from github).

Thanks.

On 08/13/2015 11:44 PM, Hai Li wrote:
> More registers and bit fields are added for PHY timings
> and bitclk source selection.
>
> Signed-off-by: Hai Li <hali at codeaurora.org>
> ---
>   rnndb/dsi/dsi.xml | 11 +++++++++--
>   1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/rnndb/dsi/dsi.xml b/rnndb/dsi/dsi.xml
> index 02cfa3b..956f3ff 100644
> --- a/rnndb/dsi/dsi.xml
> +++ b/rnndb/dsi/dsi.xml
> @@ -217,6 +217,9 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd">
>   	<reg32 offset="0x00128" name="PHY_RESET">
>   		<bitfield name="RESET" pos="0" type="boolean"/>
>   	</reg32>
> +	<reg32 offset="0x0017c" name="T_CLK_PRE_EXTEND">
> +		<bitfield name="INC_BY_2_BYTECLK" pos="0" type="boolean"/>
> +	</reg32>
>   	<reg32 offset="0x001d0" name="RDBK_DATA_CTRL">
>   		<bitfield name="COUNT" low="16" high="23" type="uint"/>
>   		<bitfield name="CLR" pos="0" type="boolean"/>
> @@ -437,7 +440,9 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd">
>   	<reg32 offset="0x001c4" name="BIST_CTRL_4"/>
>   	<reg32 offset="0x001c8" name="BIST_CTRL_5"/>
>   
> -	<reg32 offset="0x001d4" name="GLBL_TEST_CTRL"/>
> +	<reg32 offset="0x001d4" name="GLBL_TEST_CTRL">
> +		<bitfield name="BITCLK_HS_SEL" pos="0" type="boolean"/>
> +	</reg32>
>   	<reg32 offset="0x001dc" name="LDO_CNTRL"/>
>   </domain>
>   
> @@ -608,7 +613,9 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd">
>   	<reg32 offset="0x001c4" name="BIST_CTRL_4"/>
>   	<reg32 offset="0x001c8" name="BIST_CTRL_5"/>
>   
> -	<reg32 offset="0x001d4" name="GLBL_TEST_CTRL"/>
> +	<reg32 offset="0x001d4" name="GLBL_TEST_CTRL">
> +		<bitfield name="BITCLK_HS_SEL" pos="0" type="boolean"/>
> +	</reg32>
>   	<reg32 offset="0x001dc" name="LDO_CNTRL"/>
>   </domain>
>