[PATCH 3/3] drm/i915/dp: move TPS3 logic to where it's used

[Jani Nikula]

There is no need to have a separate flag for tps3 as the information is
only used at one location. Move the logic there to make it easier to
follow.

Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c  | 31 +++++++++++++++++--------------
 drivers/gpu/drm/i915/intel_drv.h |  1 -
 2 files changed, 17 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 60dca34d2f0f..cc97d5d7fe5e 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3746,13 +3746,25 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 void
 intel_dp_complete_link_train(struct intel_dp *intel_dp)
 {
+	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = dig_port->base.base.dev;
 	bool channel_eq = false;
 	int tries, cr_tries;
 	uint32_t DP = intel_dp->DP;
 	uint32_t training_pattern = DP_TRAINING_PATTERN_2;
 
-	/* Training Pattern 3 for HBR2 or 1.2 devices that support it*/
-	if (intel_dp->link_rate == 540000 || intel_dp->use_tps3)
+	/*
+	 * Training Pattern 3 for HBR2 or 1.2 devices that support it.
+	 *
+	 * Intel platforms that support HBR2 also support TPS3. TPS3 support is
+	 * also mandatory for downstream devices that support HBR2.
+	 *
+	 * Due to WaDisableHBR2 SKL < B0 is the only exception where TPS3 is
+	 * supported but still not enabled.
+	 */
+	if (intel_dp->link_rate == 540000 ||
+	    (intel_dp_source_supports_hbr2(dev) &&
+	     drm_dp_tps3_supported(intel_dp->dpcd)))
 		training_pattern = DP_TRAINING_PATTERN_3;
 
 	/* channel equalization */
@@ -3934,18 +3946,9 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
 		}
 	}
 
-	/* Training Pattern 3 support, Intel platforms that support HBR2 alone
-	 * have support for TP3 hence that check is used along with dpcd check
-	 * to ensure TP3 can be enabled.
-	 * SKL < B0: due it's WaDisableHBR2 is the only exception where TP3 is
-	 * supported but still not enabled.
-	 */
-	if (drm_dp_tps3_supported(intel_dp->dpcd) &&
-	    intel_dp_source_supports_hbr2(dev)) {
-		intel_dp->use_tps3 = true;
-		DRM_DEBUG_KMS("Displayport TPS3 supported\n");
-	} else
-		intel_dp->use_tps3 = false;
+	DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
+		      intel_dp_source_supports_hbr2(dev) ? "yes" : "no",
+		      drm_dp_tps3_supported(intel_dp->dpcd) ? "yes" : "no");
 
 	/* Intermediate frequency support */
 	if (is_edp(intel_dp) &&
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 71a2e18d9f50..1de68b2cdae6 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -743,7 +743,6 @@ struct intel_dp {
 	enum pipe pps_pipe;
 	struct edp_power_seq pps_delays;
 
-	bool use_tps3;
 	bool can_mst; /* this port supports mst */
 	bool is_mst;
 	int active_mst_links;
-- 
2.1.4