[PATCH 3/3] dt-bindings: exynos-dp: update ports node binding for panel
Inki Dae
inki.dae at samsung.com
Fri Dec 4 01:08:47 PST 2015
Hi Rob,
2015년 12월 04일 08:38에 Rob Herring 이(가) 쓴 글:
> On Thu, Dec 03, 2015 at 06:30:10PM +0900, Inki Dae wrote:
>> This patch updates a ports node binding for panel.
>>
>> With this, dp node can have a ports node which describes
>> a remote endpoint node that can be connected to panel or bridge
>> node.
>>
>> Signed-off-by: Inki Dae <inki.dae at samsung.com>
>> ---
>> .../bindings/display/exynos/exynos_dp.txt | 28 ++++++++++++++++++----
>> 1 file changed, 24 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
>> index 64693f2..15b52cb 100644
>> --- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
>> +++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
>> @@ -66,8 +66,15 @@ Optional properties for dp-controller:
>> Hotplug detect GPIO.
>> Indicates which GPIO should be used for hotplug
>> detection
>> - -video interfaces: Device node can contain video interface port
>> - nodes according to [1].
>> +Video interfaces:
>> + Device node can contain video interface port nodes according to [1].
>> + The following are properties specific to those nodes:
>> +
>> + endpoint node connected to bridge or panel node:
>> + - remote-endpoint: specifies the endpoint in panel or bridge node.
>> + This node is required in all kinds of exynos dp
>> + to represent the connection between dp and bridge
>> + ,or dp and panel.
>
> Fix your punctuation.
Right.
>
>>
>> [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
>>
>> @@ -111,9 +118,22 @@ Board Specific portion:
>> };
>>
>> ports {
>> - port at 0 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>
> You don't need these.
Ditto.
>
>> +
>> + port {
>> dp_out: endpoint {
>> - remote-endpoint = <&bridge_in>;
>> + remote-endpoint = <&dp_in>;
>> + };
>> + };
>> + };
>> +
>> + panel at 0 {
>> + reg = <0>;
>
> Drop the @0 and reg as you only have 1.
Ditto.
Thanks,
Inki Dae
>
>> + ...
>> + port {
>> + dp_in: endpoint {
>> + remote-endpoint = <&dp_out>;
>> };
>> };
>> };
>> --
>> 1.9.1
>>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
More information about the dri-devel
mailing list