[PATCH igt v6 6/6] tests: Add prime_mmap_coherency for cache coherency tests
Tiago Vignatti
tiago.vignatti at intel.com
Wed Dec 16 14:25:43 PST 2015
Different than kms_mmap_write_crc that captures the coherency issues within the
scanout mapped buffer, this one is meant for test dma-buf mmap on !llc
platforms mostly and provoke coherency bugs so we know where we need the sync
ioctls.
I tested this with !llc and llc platforms, BTY and IVY respectively.
Signed-off-by: Tiago Vignatti <tiago.vignatti at intel.com>
---
tests/Makefile.sources | 1 +
tests/prime_mmap_coherency.c | 246 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 247 insertions(+)
create mode 100644 tests/prime_mmap_coherency.c
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index ad2dd6a..78605c6 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -97,6 +97,7 @@ TESTS_progs_M = \
pm_rc6_residency \
pm_sseu \
prime_mmap \
+ prime_mmap_coherency \
prime_self_import \
template \
$(NULL)
diff --git a/tests/prime_mmap_coherency.c b/tests/prime_mmap_coherency.c
new file mode 100644
index 0000000..a9a2664
--- /dev/null
+++ b/tests/prime_mmap_coherency.c
@@ -0,0 +1,246 @@
+/*
+ * Copyright © 2015 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Tiago Vignatti
+ */
+
+/** @file prime_mmap_coherency.c
+ *
+ * TODO: need to show the need for prime_sync_end().
+ */
+
+#include "igt.h"
+
+IGT_TEST_DESCRIPTION("Test dma-buf mmap on !llc platforms mostly and provoke"
+ " coherency bugs so we know for sure where we need the sync ioctls.");
+
+#define ROUNDS 20
+
+int fd;
+int stale = 0;
+static drm_intel_bufmgr *bufmgr;
+struct intel_batchbuffer *batch;
+static int width = 1024, height = 1024;
+
+/*
+ * Exercises the need for read flush:
+ * 1. create a BO and write '0's, in GTT domain.
+ * 2. read BO using the dma-buf CPU mmap.
+ * 3. write '1's, in GTT domain.
+ * 4. read again through the mapped dma-buf.
+ */
+static void test_read_flush(bool expect_stale_cache)
+{
+ drm_intel_bo *bo_1;
+ drm_intel_bo *bo_2;
+ uint32_t *ptr_cpu;
+ uint32_t *ptr_gtt;
+ int dma_buf_fd, i;
+
+ if (expect_stale_cache)
+ igt_require(!gem_has_llc(fd));
+
+ bo_1 = drm_intel_bo_alloc(bufmgr, "BO 1", width * height * 4, 4096);
+
+ /* STEP #1: put the BO 1 in GTT domain. We use the blitter to copy and fill
+ * zeros to BO 1, so commands will be submitted and likely to place BO 1 in
+ * the GTT domain. */
+ bo_2 = drm_intel_bo_alloc(bufmgr, "BO 2", width * height * 4, 4096);
+ intel_copy_bo(batch, bo_1, bo_2, width * height);
+ gem_sync(fd, bo_1->handle);
+ drm_intel_bo_unreference(bo_2);
+
+ /* STEP #2: read BO 1 using the dma-buf CPU mmap. This dirties the CPU caches. */
+ dma_buf_fd = prime_handle_to_fd_for_mmap(fd, bo_1->handle);
+ igt_skip_on(errno == EINVAL);
+
+ ptr_cpu = mmap(NULL, width * height, PROT_READ | PROT_WRITE,
+ MAP_SHARED, dma_buf_fd, 0);
+ igt_assert(ptr_cpu != MAP_FAILED);
+
+ for (i = 0; i < (width * height) / 4; i++)
+ igt_assert_eq(ptr_cpu[i], 0);
+
+ /* STEP #3: write 0x11 into BO 1. */
+ bo_2 = drm_intel_bo_alloc(bufmgr, "BO 2", width * height * 4, 4096);
+ ptr_gtt = gem_mmap__gtt(fd, bo_2->handle, width * height, PROT_READ | PROT_WRITE);
+ memset(ptr_gtt, 0x11, width * height);
+ munmap(ptr_gtt, width * height);
+
+ intel_copy_bo(batch, bo_1, bo_2, width * height);
+ gem_sync(fd, bo_1->handle);
+ drm_intel_bo_unreference(bo_2);
+
+ /* STEP #4: read again using the CPU mmap. Doing #1 before #3 makes sure we
+ * don't do a full CPU cache flush in step #3 again. That makes sure all the
+ * stale cachelines from step #2 survive (mostly, a few will be evicted)
+ * until we try to read them again in step #4. This behavior could be fixed
+ * by flush CPU read right before accessing the CPU pointer */
+ if (!expect_stale_cache)
+ prime_sync_start(dma_buf_fd);
+
+ for (i = 0; i < (width * height) / 4; i++)
+ if (ptr_cpu[i] != 0x11111111) {
+ igt_warn_on_f(!expect_stale_cache,
+ "Found 0x%08x at offset 0x%08x\n", ptr_cpu[i], i);
+ stale++;
+ }
+
+ drm_intel_bo_unreference(bo_1);
+ munmap(ptr_cpu, width * height);
+}
+
+/*
+ * Exercises the need for write flush:
+ * 1. create BO 1 and write '0's, in GTT domain.
+ * 2. write '1's into BO 1 using the dma-buf CPU mmap.
+ * 3. copy BO 1 to new BO 2, in GTT domain.
+ * 4. read via dma-buf mmap BO 2.
+ */
+static void test_write_flush(bool expect_stale_cache)
+{
+ drm_intel_bo *bo_1;
+ drm_intel_bo *bo_2;
+ uint32_t *ptr_cpu;
+ uint32_t *ptr2_cpu;
+ int dma_buf_fd, dma_buf2_fd, i;
+
+ if (expect_stale_cache)
+ igt_require(!gem_has_llc(fd));
+
+ bo_1 = drm_intel_bo_alloc(bufmgr, "BO 1", width * height * 4, 4096);
+
+ /* STEP #1: Put the BO 1 in GTT domain. We use the blitter to copy and fill
+ * zeros to BO 1, so commands will be submitted and likely to place BO 1 in
+ * the GTT domain. */
+ bo_2 = drm_intel_bo_alloc(bufmgr, "BO 2", width * height * 4, 4096);
+ intel_copy_bo(batch, bo_1, bo_2, width * height);
+ gem_sync(fd, bo_1->handle);
+ drm_intel_bo_unreference(bo_2);
+
+ /* STEP #2: Write '1's into BO 1 using the dma-buf CPU mmap. */
+ dma_buf_fd = prime_handle_to_fd_for_mmap(fd, bo_1->handle);
+ igt_skip_on(errno == EINVAL);
+
+ ptr_cpu = mmap(NULL, width * height, PROT_READ | PROT_WRITE,
+ MAP_SHARED, dma_buf_fd, 0);
+ igt_assert(ptr_cpu != MAP_FAILED);
+
+ /* This is the main point of this test: !llc hw requires a cache write
+ * flush right here (explained in step #4). */
+ if (!expect_stale_cache)
+ prime_sync_start(dma_buf_fd);
+
+ memset(ptr_cpu, 0x11, width * height);
+
+ /* STEP #3: Copy BO 1 into BO 2, using blitter. */
+ bo_2 = drm_intel_bo_alloc(bufmgr, "BO 2", width * height * 4, 4096);
+ intel_copy_bo(batch, bo_2, bo_1, width * height);
+ gem_sync(fd, bo_2->handle);
+
+ /* STEP #4: compare BO 2 against written BO 1. In !llc hardware, there
+ * should be some cache lines that didn't get flushed out and are still 0,
+ * requiring cache flush before the write in step 2. */
+ dma_buf2_fd = prime_handle_to_fd_for_mmap(fd, bo_2->handle);
+ igt_skip_on(errno == EINVAL);
+
+ ptr2_cpu = mmap(NULL, width * height, PROT_READ | PROT_WRITE,
+ MAP_SHARED, dma_buf2_fd, 0);
+ igt_assert(ptr2_cpu != MAP_FAILED);
+
+ for (i = 0; i < (width * height) / 4; i++)
+ if (ptr2_cpu[i] != 0x11111111) {
+ igt_warn_on_f(!expect_stale_cache,
+ "Found 0x%08x at offset 0x%08x\n", ptr2_cpu[i], i);
+ stale++;
+ }
+
+ drm_intel_bo_unreference(bo_1);
+ drm_intel_bo_unreference(bo_2);
+ munmap(ptr_cpu, width * height);
+}
+
+int main(int argc, char **argv)
+{
+ int i;
+ bool expect_stale_cache;
+ igt_subtest_init(argc, argv);
+
+ igt_fixture {
+ fd = drm_open_driver(DRIVER_INTEL);
+
+ bufmgr = drm_intel_bufmgr_gem_init(fd, 4096);
+ batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
+ }
+
+ /* Cache coherency and the eviction are pretty much unpredictable, so
+ * reproducing boils down to trial and error to hit different scenarios.
+ * TODO: We may want to improve tests a bit by picking random subranges. */
+ igt_info("%d rounds for each test\n", ROUNDS);
+ igt_subtest("read") {
+ stale = 0;
+ expect_stale_cache = false;
+ igt_info("exercising read flush\n");
+ for (i = 0; i < ROUNDS; i++)
+ test_read_flush(expect_stale_cache);
+ igt_fail_on_f(stale, "num of stale cache lines %d\n", stale);
+ }
+
+ /* Only for !llc platforms */
+ igt_subtest("read-and-fail") {
+ stale = 0;
+ expect_stale_cache = true;
+ igt_info("exercising read flush and expect to fail on !llc\n");
+ for (i = 0; i < ROUNDS; i++)
+ test_read_flush(expect_stale_cache);
+ igt_fail_on_f(!stale, "couldn't find any stale cache lines\n");
+ }
+
+ igt_subtest("write") {
+ stale = 0;
+ expect_stale_cache = false;
+ igt_info("exercising write flush\n");
+ for (i = 0; i < ROUNDS; i++)
+ test_write_flush(expect_stale_cache);
+ igt_fail_on_f(stale, "num of stale cache lines %d\n", stale);
+ }
+
+ /* Only for !llc platforms */
+ igt_subtest("write-and-fail") {
+ stale = 0;
+ expect_stale_cache = true;
+ igt_info("exercising write flush and expect to fail on !llc\n");
+ for (i = 0; i < ROUNDS; i++)
+ test_write_flush(expect_stale_cache);
+ igt_fail_on_f(!stale, "couldn't find any stale cache lines\n");
+ }
+
+ igt_fixture {
+ intel_batchbuffer_free(batch);
+ drm_intel_bufmgr_destroy(bufmgr);
+
+ close(fd);
+ }
+
+ igt_exit();
+}
--
2.1.4
More information about the dri-devel
mailing list