[PATCH v3 5/7] drm/exynos: mixer: refactor layer setup

[Marek Szyprowski]

Hi Joonyoung,

On 2015-12-17 05:19, Joonyoung Shim wrote:
> Hi Marek,
>
> On 12/16/2015 09:21 PM, Marek Szyprowski wrote:
>> Properly configure blending properties of given hardware layer based on
>> the selected pixel format. Currently only per-pixel-based alpha is possible
>> when respective pixel format has been selected. Configuration of global,
>> per-plane alpha value, color key and background color will be added later.
>>
>> This patch is heavily inspired by earlier work done by Tobias Jakobi
>> <tjakobi at math.uni-bielefeld.de>.
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
>> ---
>>   drivers/gpu/drm/exynos/exynos_mixer.c | 43 +++++++++++++++++++++++++++++++++++
>>   drivers/gpu/drm/exynos/regs-mixer.h   |  1 +
>>   2 files changed, 44 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
>> index c572e271579e..ae7b122274ac 100644
>> --- a/drivers/gpu/drm/exynos/exynos_mixer.c
>> +++ b/drivers/gpu/drm/exynos/exynos_mixer.c
>> @@ -165,6 +165,16 @@ static const u8 filter_cr_horiz_tap4[] = {
>>   	70,	59,	48,	37,	27,	19,	11,	5,
>>   };
>>   
>> +static inline bool is_alpha_format(unsigned int pixel_format)
>> +{
>> +	switch (pixel_format) {
>> +	case DRM_FORMAT_ARGB8888:
>> +		return true;
>> +	default:
>> +		return false;
>> +	}
>> +}
>> +
>>   static inline u32 vp_reg_read(struct mixer_resources *res, u32 reg_id)
>>   {
>>   	return readl(res->vp_regs + reg_id);
>> @@ -294,6 +304,37 @@ static void vp_default_filter(struct mixer_resources *res)
>>   		filter_cr_horiz_tap4, sizeof(filter_cr_horiz_tap4));
>>   }
>>   
>> +static void mixer_cfg_gfx_blend(struct mixer_context *ctx, unsigned int win,
>> +				bool alpha)
>> +{
>> +	struct mixer_resources *res = &ctx->mixer_res;
>> +	u32 val;
>> +
>> +	val  = MXR_GRP_CFG_COLOR_KEY_DISABLE; /* no blank key */
>> +	if (alpha) {
>> +		/* blending based on pixel alpha */
>> +		val |= MXR_GRP_CFG_BLEND_PRE_MUL;
>> +		val |= MXR_GRP_CFG_PIXEL_BLEND_EN;
>> +	}
>> +	mixer_reg_writemask(res, MXR_GRAPHIC_CFG(win),
>> +			    val, MXR_GRP_CFG_MISC_MASK);
> I think the priority of plane and whether vp layer exists should be
> considered for blending setting. When priority of graphic layer0 is
> lowest and vp layer is not, this will blend background layer.
> It was not permitted to blend background layer until current.

Currently blending is hardcoded to following configuration:
1. Order: [top] Grp1 > Grp0 > Video [bottom]
2. Per-pixel alpha blending enabled unconditionally for Grp1 layer 
(regardless
    of the selected pixel format for Grp1 layer).
3. Per-pixel alpha blending enabled for Grp0 layer when Video layer gets 
enabled
    (regardless of the selected pixel format for Grp0 layer).

It is not very intuitive and it looks hardcoded for one particular use case.
With the above patch application can configure blending for its needs.

I really see no reason for special handling of the bottom layer (like
disabling per-pixel alpha even if alpha-enabled format is selected). It is
role of application to set proper pixel format (like XRGB8888 instead of
ARGB8888) if the application is not interested in alpha blending. Per-pixel
alpha blending is enabled only for formats which really support alpha.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland