[PATCH] drm/exynos: remove unused files
Andrzej Hajda
a.hajda at samsung.com
Wed Feb 18 03:17:07 PST 2015
These files are not used anymore.
Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
---
drivers/gpu/drm/exynos/exynos_drm_connector.c | 245 --------------------------
drivers/gpu/drm/exynos/exynos_drm_connector.h | 20 ---
2 files changed, 265 deletions(-)
delete mode 100644 drivers/gpu/drm/exynos/exynos_drm_connector.c
delete mode 100644 drivers/gpu/drm/exynos/exynos_drm_connector.h
diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c
deleted file mode 100644
index ba9b3d5..0000000
--- a/drivers/gpu/drm/exynos/exynos_drm_connector.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * Authors:
- * Inki Dae <inki.dae at samsung.com>
- * Joonyoung Shim <jy0922.shim at samsung.com>
- * Seung-Woo Kim <sw0312.kim at samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <drm/drmP.h>
-#include <drm/drm_crtc_helper.h>
-
-#include <drm/exynos_drm.h>
-#include "exynos_drm_drv.h"
-#include "exynos_drm_encoder.h"
-#include "exynos_drm_connector.h"
-
-#define to_exynos_connector(x) container_of(x, struct exynos_drm_connector,\
- drm_connector)
-
-struct exynos_drm_connector {
- struct drm_connector drm_connector;
- uint32_t encoder_id;
- struct exynos_drm_display *display;
-};
-
-static int exynos_drm_connector_get_modes(struct drm_connector *connector)
-{
- struct exynos_drm_connector *exynos_connector =
- to_exynos_connector(connector);
- struct exynos_drm_display *display = exynos_connector->display;
- struct edid *edid = NULL;
- unsigned int count = 0;
- int ret;
-
- /*
- * if get_edid() exists then get_edid() callback of hdmi side
- * is called to get edid data through i2c interface else
- * get timing from the FIMD driver(display controller).
- *
- * P.S. in case of lcd panel, count is always 1 if success
- * because lcd panel has only one mode.
- */
- if (display->ops->get_edid) {
- edid = display->ops->get_edid(display, connector);
- if (IS_ERR_OR_NULL(edid)) {
- ret = PTR_ERR(edid);
- edid = NULL;
- DRM_ERROR("Panel operation get_edid failed %d\n", ret);
- goto out;
- }
-
- count = drm_add_edid_modes(connector, edid);
- if (!count) {
- DRM_ERROR("Add edid modes failed %d\n", count);
- goto out;
- }
-
- drm_mode_connector_update_edid_property(connector, edid);
- } else {
- struct exynos_drm_panel_info *panel;
- struct drm_display_mode *mode = drm_mode_create(connector->dev);
- if (!mode) {
- DRM_ERROR("failed to create a new display mode.\n");
- return 0;
- }
-
- if (display->ops->get_panel)
- panel = display->ops->get_panel(display);
- else {
- drm_mode_destroy(connector->dev, mode);
- return 0;
- }
-
- drm_display_mode_from_videomode(&panel->vm, mode);
- mode->width_mm = panel->width_mm;
- mode->height_mm = panel->height_mm;
- connector->display_info.width_mm = mode->width_mm;
- connector->display_info.height_mm = mode->height_mm;
-
- mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
- drm_mode_set_name(mode);
- drm_mode_probed_add(connector, mode);
-
- count = 1;
- }
-
-out:
- kfree(edid);
- return count;
-}
-
-static int exynos_drm_connector_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- struct exynos_drm_connector *exynos_connector =
- to_exynos_connector(connector);
- struct exynos_drm_display *display = exynos_connector->display;
- int ret = MODE_BAD;
-
- DRM_DEBUG_KMS("%s\n", __FILE__);
-
- if (display->ops->check_mode)
- if (!display->ops->check_mode(display, mode))
- ret = MODE_OK;
-
- return ret;
-}
-
-static struct drm_encoder *exynos_drm_best_encoder(
- struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct exynos_drm_connector *exynos_connector =
- to_exynos_connector(connector);
- return drm_encoder_find(dev, exynos_connector->encoder_id);
-}
-
-static struct drm_connector_helper_funcs exynos_connector_helper_funcs = {
- .get_modes = exynos_drm_connector_get_modes,
- .mode_valid = exynos_drm_connector_mode_valid,
- .best_encoder = exynos_drm_best_encoder,
-};
-
-static int exynos_drm_connector_fill_modes(struct drm_connector *connector,
- unsigned int max_width, unsigned int max_height)
-{
- struct exynos_drm_connector *exynos_connector =
- to_exynos_connector(connector);
- struct exynos_drm_display *display = exynos_connector->display;
- unsigned int width, height;
-
- width = max_width;
- height = max_height;
-
- /*
- * if specific driver want to find desired_mode using maxmum
- * resolution then get max width and height from that driver.
- */
- if (display->ops->get_max_resol)
- display->ops->get_max_resol(display, &width, &height);
-
- return drm_helper_probe_single_connector_modes(connector, width,
- height);
-}
-
-/* get detection status of display device. */
-static enum drm_connector_status
-exynos_drm_connector_detect(struct drm_connector *connector, bool force)
-{
- struct exynos_drm_connector *exynos_connector =
- to_exynos_connector(connector);
- struct exynos_drm_display *display = exynos_connector->display;
- enum drm_connector_status status = connector_status_disconnected;
-
- if (display->ops->is_connected) {
- if (display->ops->is_connected(display))
- status = connector_status_connected;
- else
- status = connector_status_disconnected;
- }
-
- return status;
-}
-
-static void exynos_drm_connector_destroy(struct drm_connector *connector)
-{
- struct exynos_drm_connector *exynos_connector =
- to_exynos_connector(connector);
-
- drm_connector_unregister(connector);
- drm_connector_cleanup(connector);
- kfree(exynos_connector);
-}
-
-static struct drm_connector_funcs exynos_connector_funcs = {
- .dpms = drm_helper_connector_dpms,
- .fill_modes = exynos_drm_connector_fill_modes,
- .detect = exynos_drm_connector_detect,
- .destroy = exynos_drm_connector_destroy,
-};
-
-struct drm_connector *exynos_drm_connector_create(struct drm_device *dev,
- struct drm_encoder *encoder)
-{
- struct exynos_drm_connector *exynos_connector;
- struct exynos_drm_display *display = exynos_drm_get_display(encoder);
- struct drm_connector *connector;
- int type;
- int err;
-
- exynos_connector = kzalloc(sizeof(*exynos_connector), GFP_KERNEL);
- if (!exynos_connector)
- return NULL;
-
- connector = &exynos_connector->drm_connector;
-
- switch (display->type) {
- case EXYNOS_DISPLAY_TYPE_HDMI:
- type = DRM_MODE_CONNECTOR_HDMIA;
- connector->interlace_allowed = true;
- connector->polled = DRM_CONNECTOR_POLL_HPD;
- break;
- case EXYNOS_DISPLAY_TYPE_VIDI:
- type = DRM_MODE_CONNECTOR_VIRTUAL;
- connector->polled = DRM_CONNECTOR_POLL_HPD;
- break;
- default:
- type = DRM_MODE_CONNECTOR_Unknown;
- break;
- }
-
- drm_connector_init(dev, connector, &exynos_connector_funcs, type);
- drm_connector_helper_add(connector, &exynos_connector_helper_funcs);
-
- err = drm_connector_register(connector);
- if (err)
- goto err_connector;
-
- exynos_connector->encoder_id = encoder->base.id;
- exynos_connector->display = display;
- connector->dpms = DRM_MODE_DPMS_OFF;
- connector->encoder = encoder;
-
- err = drm_mode_connector_attach_encoder(connector, encoder);
- if (err) {
- DRM_ERROR("failed to attach a connector to a encoder\n");
- goto err_sysfs;
- }
-
- DRM_DEBUG_KMS("connector has been created\n");
-
- return connector;
-
-err_sysfs:
- drm_connector_unregister(connector);
-err_connector:
- drm_connector_cleanup(connector);
- kfree(exynos_connector);
- return NULL;
-}
diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.h b/drivers/gpu/drm/exynos/exynos_drm_connector.h
deleted file mode 100644
index 4eb20d7..0000000
--- a/drivers/gpu/drm/exynos/exynos_drm_connector.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * Authors:
- * Inki Dae <inki.dae at samsung.com>
- * Joonyoung Shim <jy0922.shim at samsung.com>
- * Seung-Woo Kim <sw0312.kim at samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef _EXYNOS_DRM_CONNECTOR_H_
-#define _EXYNOS_DRM_CONNECTOR_H_
-
-struct drm_connector *exynos_drm_connector_create(struct drm_device *dev,
- struct drm_encoder *encoder);
-
-#endif
--
1.9.1
More information about the dri-devel
mailing list