[PATCH] Fix i2c table parsing for dcb 4.1

[Stefan Huehner]

Code before looked only at bit 31 to decide if a port is unused.
However dcb 4.1 spec says 0x1F in bits 31-27 and 26-22 means unused.

This fixed hdmi monitor detection on GM206.
---
 drm/nouveau/nvkm/subdev/bios/i2c.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drm/nouveau/nvkm/subdev/bios/i2c.c b/drm/nouveau/nvkm/subdev/bios/i2c.c
index d1a89b2..c4e1f08 100644
--- a/drm/nouveau/nvkm/subdev/bios/i2c.c
+++ b/drm/nouveau/nvkm/subdev/bios/i2c.c
@@ -74,7 +74,11 @@ dcb_i2c_parse(struct nvkm_bios *bios, u8 idx, struct dcb_i2c_entry *info)
 	u16 ent = dcb_i2c_entry(bios, idx, &ver, &len);
 	if (ent) {
 		if (ver >= 0x41) {
-			if (!(nv_ro32(bios, ent) & 0x80000000))
+			u32 ent_value = nv_ro32(bios, ent);
+			u8 i2c_port = (ent_value >> 27) & 0x1f;
+			u8 dpaux_port = (ent_value >> 22) & 0x1f;
+			/* value 0x1f means unused according to DCB 4.x spec */
+			if (i2c_port == 0x1f && dpaux_port == 0x1f)
 				info->type = DCB_I2C_UNUSED;
 			else
 				info->type = DCB_I2C_PMGR;
-- 
2.1.4