[PATCH 04/11] dt-bindings: Add documentation for rockchip lvds

Laurent Pinchart laurent.pinchart at ideasonboard.com
Thu Feb 26 10:46:47 PST 2015


Hi Heiko,

Thank you for the patch.

On Saturday 31 January 2015 17:32:57 Heiko Stuebner wrote:
> From: Mark Yao <yzq at rock-chips.com>
> 
> Add binding documentation for Rockchip SoC LVDS driver.
> 
> Signed-off-by: Mark Yao <yzq at rock-chips.com>
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> ---
>  .../devicetree/bindings/video/rockchip-lvds.txt    | 59 +++++++++++++++++++
>  1 file changed, 59 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/video/rockchip-lvds.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/rockchip-lvds.txt
> b/Documentation/devicetree/bindings/video/rockchip-lvds.txt new file mode
> 100644
> index 0000000..1616d7e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/rockchip-lvds.txt
> @@ -0,0 +1,59 @@
> +Rockchip RK3288 LVDS interface
> +================================
> +
> +Required properties:
> +- compatible: "rockchip,rk3288-lvds";
> +
> +- reg: physical base address of the controller and length
> +	of memory mapped region.
> +- clocks: must include clock specifiers corresponding to entries in the
> +	clock-names property.
> +- clock-names: must contain "pclk_lvds"
> +
> +- avdd1v0-supply: regulator phandle for 1.0V analog power
> +- avdd1v8-supply: regulator phandle for 1.8V analog power
> +- avdd3v3-supply: regulator phandle for 3.3V analog power
> +
> +- rockchip,grf: phandle to the general register files syscon
> +- rockchip,panel: phandle to a panel node as described by
> +	Documentation/devicetree/bindings/panel/*

Doesn't this duplicate the information provided by the ports ?

> +- rockchip,data-mapping: should be "vesa" or "jeida",
> +	This describes how the color bits are laid out in the
> +	serialized LVDS signal.
> +- rockchip,data-width : should be <18> or <24>;
> +- rockchip,output: should be "rgb", "lvds" or "duallvds",
> +	This describes the output face.

Isn't all this panel-dependent ? Could we query the information from the panel 
at runtime instead ?

> +- ports: contain a port node with endpoint definitions as defined in
> +	Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +Example:
> +	lvds: lvds at ff96c000 {
> +		compatible = "rockchip,rk3288-lvds";
> +		rockchip,grf = <&grf>;
> +		reg = <0xff96c000 0x4000>;
> +		clocks = <&cru PCLK_LVDS_PHY>;
> +		clock-names = "pclk_lvds";
> +		avdd1v0-supply = <&vdd10_lcd>;
> +		avdd1v8-supply = <&vcc18_lcd>;
> +		avdd3v3-supply = <&vcca_33>;
> +		rockchip,panel = <&panel>;
> +		rockchip,data-mapping = "jeida";
> +		rockchip,data-width = <24>;
> +		rockchip,output = "rgb";
> +		ports {
> +			lvds_in: port {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				lvds_in_vopb: endpoint at 0 {
> +					reg = <0>;
> +					remote-endpoint = <&vopb_out_lvds>;
> +				};
> +				lvds_in_vopl: endpoint at 1 {
> +					reg = <1>;
> +					remote-endpoint = <&vopl_out_lvds>;
> +				};
> +			};
> +		};
> +	};

-- 
Regards,

Laurent Pinchart



More information about the dri-devel mailing list