[PATCH v2] drm/dp: add DPCD definitions from DP 1.1 and 1.2a
Jani Nikula
jani.nikula at intel.com
Fri Feb 27 03:12:46 PST 2015
Apologies, this was supposed to be in reply to
http://mid.gmane.org/54EEECC9.4010902@intel.com
On Fri, 27 Feb 2015, Jani Nikula <jani.nikula at intel.com> wrote:
> Add a number of DPCD definitions from DP 1.1 and 1.2a.
>
> v2: drop wrong DP version reference, rename DP training set macros
> (Sonika).
>
> Reviewed-by: Sonika Jindal <sonika.jindal at intel.com>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> ---
> include/drm/drm_dp_helper.h | 93 ++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 88 insertions(+), 5 deletions(-)
>
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index a3ecaa06c9db..319d5edfb3b5 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -92,6 +92,15 @@
> # define DP_MSA_TIMING_PAR_IGNORED (1 << 6) /* eDP */
> # define DP_OUI_SUPPORT (1 << 7)
>
> +#define DP_RECEIVE_PORT_0_CAP_0 0x008
> +# define DP_LOCAL_EDID_PRESENT (1 << 1)
> +# define DP_ASSOCIATED_TO_PRECEDING_PORT (1 << 2)
> +
> +#define DP_RECEIVE_PORT_0_BUFFER_SIZE 0x009
> +
> +#define DP_RECEIVE_PORT_1_CAP_0 0x00a
> +#define DP_RECEIVE_PORT_1_BUFFER_SIZE 0x00b
> +
> #define DP_I2C_SPEED_CAP 0x00c /* DPI */
> # define DP_I2C_SPEED_1K 0x01
> # define DP_I2C_SPEED_5K 0x02
> @@ -101,10 +110,16 @@
> # define DP_I2C_SPEED_1M 0x20
>
> #define DP_EDP_CONFIGURATION_CAP 0x00d /* XXX 1.2? */
> +# define DP_ALTERNATE_SCRAMBLER_RESET_CAP (1 << 0)
> +# define DP_FRAMING_CHANGE_CAP (1 << 1)
> # define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3) /* edp v1.2 or higher */
>
> #define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */
>
> +#define DP_ADAPTER_CAP 0x00f /* 1.2 */
> +# define DP_FORCE_LOAD_SENSE_CAP (1 << 0)
> +# define DP_ALTERNATE_I2C_PATTERN_CAP (1 << 1)
> +
> #define DP_SUPPORTED_LINK_RATES 0x010 /* eDP 1.4 */
> # define DP_MAX_SUPPORTED_RATES 8 /* 16-bit little-endian */
>
> @@ -115,6 +130,44 @@
> #define DP_MSTM_CAP 0x021 /* 1.2 */
> # define DP_MST_CAP (1 << 0)
>
> +#define DP_NUMBER_OF_AUDIO_ENDPOINTS 0x022 /* 1.2 */
> +
> +/* AV_SYNC_DATA_BLOCK 1.2 */
> +#define DP_AV_GRANULARITY 0x023
> +# define DP_AG_FACTOR_MASK (0xf << 0)
> +# define DP_AG_FACTOR_3MS (0 << 0)
> +# define DP_AG_FACTOR_2MS (1 << 0)
> +# define DP_AG_FACTOR_1MS (2 << 0)
> +# define DP_AG_FACTOR_500US (3 << 0)
> +# define DP_AG_FACTOR_200US (4 << 0)
> +# define DP_AG_FACTOR_100US (5 << 0)
> +# define DP_AG_FACTOR_10US (6 << 0)
> +# define DP_AG_FACTOR_1US (7 << 0)
> +# define DP_VG_FACTOR_MASK (0xf << 4)
> +# define DP_VG_FACTOR_3MS (0 << 4)
> +# define DP_VG_FACTOR_2MS (1 << 4)
> +# define DP_VG_FACTOR_1MS (2 << 4)
> +# define DP_VG_FACTOR_500US (3 << 4)
> +# define DP_VG_FACTOR_200US (4 << 4)
> +# define DP_VG_FACTOR_100US (5 << 4)
> +
> +#define DP_AUD_DEC_LAT0 0x024
> +#define DP_AUD_DEC_LAT1 0x025
> +
> +#define DP_AUD_PP_LAT0 0x026
> +#define DP_AUD_PP_LAT1 0x027
> +
> +#define DP_VID_INTER_LAT 0x028
> +
> +#define DP_VID_PROG_LAT 0x029
> +
> +#define DP_REP_LAT 0x02a
> +
> +#define DP_AUD_DEL_INS0 0x02b
> +#define DP_AUD_DEL_INS1 0x02c
> +#define DP_AUD_DEL_INS2 0x02d
> +/* End of AV_SYNC_DATA_BLOCK */
> +
> #define DP_GUID 0x030 /* 1.2 */
>
> #define DP_PSR_SUPPORT 0x070 /* XXX 1.2? */
> @@ -173,11 +226,12 @@
> # define DP_TRAINING_PATTERN_3 3 /* 1.2 */
> # define DP_TRAINING_PATTERN_MASK 0x3
>
> -# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2)
> -# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2)
> -# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2)
> -# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2)
> -# define DP_LINK_QUAL_PATTERN_MASK (3 << 2)
> +/* DPCD 1.1 only. For DPCD >= 1.2 see per-lane DP_LINK_QUAL_LANEn_SET */
> +# define DP_LINK_QUAL_PATTERN_11_DISABLE (0 << 2)
> +# define DP_LINK_QUAL_PATTERN_11_D10_2 (1 << 2)
> +# define DP_LINK_QUAL_PATTERN_11_ERROR_RATE (2 << 2)
> +# define DP_LINK_QUAL_PATTERN_11_PRBS7 (3 << 2)
> +# define DP_LINK_QUAL_PATTERN_11_MASK (3 << 2)
>
> # define DP_RECOVERED_CLOCK_OUT_EN (1 << 4)
> # define DP_LINK_SCRAMBLING_DISABLE (1 << 5)
> @@ -220,14 +274,43 @@
> /* bitmask as for DP_I2C_SPEED_CAP */
>
> #define DP_EDP_CONFIGURATION_SET 0x10a /* XXX 1.2? */
> +# define DP_ALTERNATE_SCRAMBLER_RESET_ENABLE (1 << 0)
> +# define DP_FRAMING_CHANGE_ENABLE (1 << 1)
> +# define DP_PANEL_SELF_TEST_ENABLE (1 << 7)
> +
> +#define DP_LINK_QUAL_LANE0_SET 0x10b /* DPCD >= 1.2 */
> +#define DP_LINK_QUAL_LANE1_SET 0x10c
> +#define DP_LINK_QUAL_LANE2_SET 0x10d
> +#define DP_LINK_QUAL_LANE3_SET 0x10e
> +# define DP_LINK_QUAL_PATTERN_DISABLE 0
> +# define DP_LINK_QUAL_PATTERN_D10_2 1
> +# define DP_LINK_QUAL_PATTERN_ERROR_RATE 2
> +# define DP_LINK_QUAL_PATTERN_PRBS7 3
> +# define DP_LINK_QUAL_PATTERN_80BIT_CUSTOM 4
> +# define DP_LINK_QUAL_PATTERN_HBR2_EYE 5
> +# define DP_LINK_QUAL_PATTERN_MASK 7
> +
> +#define DP_TRAINING_LANE0_1_SET2 0x10f
> +#define DP_TRAINING_LANE2_3_SET2 0x110
> +# define DP_LANE02_POST_CURSOR2_SET_MASK (3 << 0)
> +# define DP_LANE02_MAX_POST_CURSOR2_REACHED (1 << 2)
> +# define DP_LANE13_POST_CURSOR2_SET_MASK (3 << 4)
> +# define DP_LANE13_MAX_POST_CURSOR2_REACHED (1 << 6)
>
> #define DP_MSTM_CTRL 0x111 /* 1.2 */
> # define DP_MST_EN (1 << 0)
> # define DP_UP_REQ_EN (1 << 1)
> # define DP_UPSTREAM_IS_SRC (1 << 2)
>
> +#define DP_AUDIO_DELAY0 0x112 /* 1.2 */
> +#define DP_AUDIO_DELAY1 0x113
> +#define DP_AUDIO_DELAY2 0x114
> +
> #define DP_LINK_RATE_SET 0x115 /* eDP 1.4 */
>
> +#define DP_UPSTREAM_DEVICE_DP_PWR_NEED 0x118 /* 1.2 */
> +# define DP_PWR_NOT_NEEDED (1 << 0)
> +
> #define DP_PSR_EN_CFG 0x170 /* XXX 1.2? */
> # define DP_PSR_ENABLE (1 << 0)
> # define DP_PSR_MAIN_LINK_ACTIVE (1 << 1)
> --
> 2.1.4
>
--
Jani Nikula, Intel Open Source Technology Center
More information about the dri-devel
mailing list