[PATCH v2] drm: imx: imx-tve: Check and propagate the errors

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

In the case of errors we should propagate them.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v1:
- Fixed a typo on my FSL address

 drivers/gpu/drm/imx/imx-tve.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/imx/imx-tve.c b/drivers/gpu/drm/imx/imx-tve.c
index a729f4f7..a281723 100644
--- a/drivers/gpu/drm/imx/imx-tve.c
+++ b/drivers/gpu/drm/imx/imx-tve.c
@@ -191,10 +191,18 @@ static int tve_setup_vga(struct imx_tve *tve)
 	/* set gain to (1 + 10/128) to provide 0.7V peak-to-peak amplitude */
 	ret = regmap_update_bits(tve->regmap, TVE_TVDAC0_CONT_REG,
 				 TVE_TVDAC_GAIN_MASK, 0x0a);
+	if (ret)
+		return ret;
+
 	ret = regmap_update_bits(tve->regmap, TVE_TVDAC1_CONT_REG,
 				 TVE_TVDAC_GAIN_MASK, 0x0a);
+	if (ret)
+		return ret;
+
 	ret = regmap_update_bits(tve->regmap, TVE_TVDAC2_CONT_REG,
 				 TVE_TVDAC_GAIN_MASK, 0x0a);
+	if (ret)
+		return ret;
 
 	/* set configuration register */
 	mask = TVE_DATA_SOURCE_MASK | TVE_INP_VIDEO_FORM;
@@ -210,10 +218,8 @@ static int tve_setup_vga(struct imx_tve *tve)
 	}
 
 	/* set test mode (as documented) */
-	ret = regmap_update_bits(tve->regmap, TVE_TST_MODE_REG,
+	return regmap_update_bits(tve->regmap, TVE_TST_MODE_REG,
 				 TVE_TVDAC_TEST_MODE_MASK, 1);
-
-	return 0;
 }
 
 static enum drm_connector_status imx_tve_connector_detect(
@@ -671,6 +677,8 @@ static int imx_tve_bind(struct device *dev, struct device *master, void *data)
 
 	/* disable cable detection for VGA mode */
 	ret = regmap_write(tve->regmap, TVE_CD_CONT_REG, 0);
+	if (ret)
+		return ret;
 
 	ret = imx_tve_register(drm, tve);
 	if (ret)
-- 
1.9.1