[RFC v3 4/4] drm/i915: Enable DSI panel enable/disable based on PMIC

Shobhit Kumar shobhit.kumar at intel.com
Wed Jan 21 03:18:13 PST 2015


This allows for proper PPS during enable/disable of BYT-T platforms
where these signals are routed through PMIC. Needs DRM_PANEL to be
selected by default as well

v2: Adapt to panel find function name change in drm_panel

Signed-off-by: Shobhit Kumar <shobhit.kumar at intel.com>
---
 drivers/gpu/drm/i915/Kconfig                   |  1 +
 drivers/gpu/drm/i915/intel-panel-crystalcove.c |  1 +
 drivers/gpu/drm/i915/intel_dsi.c               | 16 ++++++++++++++++
 drivers/gpu/drm/i915/intel_dsi.h               |  6 ++++++
 4 files changed, 24 insertions(+)

diff --git a/drivers/gpu/drm/i915/Kconfig b/drivers/gpu/drm/i915/Kconfig
index 0510ef0..bacbc06 100644
--- a/drivers/gpu/drm/i915/Kconfig
+++ b/drivers/gpu/drm/i915/Kconfig
@@ -18,6 +18,7 @@ config DRM_I915
 	select INPUT if ACPI
 	select ACPI_VIDEO if ACPI
 	select ACPI_BUTTON if ACPI
+	select DRM_PANEL
 	help
 	  Choose this option if you have a system that has "Intel Graphics
 	  Media Accelerator" or "HD Graphics" integrated graphics,
diff --git a/drivers/gpu/drm/i915/intel-panel-crystalcove.c b/drivers/gpu/drm/i915/intel-panel-crystalcove.c
index a6aefa3..0f129b2 100644
--- a/drivers/gpu/drm/i915/intel-panel-crystalcove.c
+++ b/drivers/gpu/drm/i915/intel-panel-crystalcove.c
@@ -154,6 +154,7 @@ static struct platform_driver crystalcove_panel_driver = {
 
 module_platform_driver(crystalcove_panel_driver);
 
+MODULE_ALIAS();
 MODULE_AUTHOR("Shobhit Kumar <shobhit.kumar at linux.intel.com");
 MODULE_DESCRIPTION("Intel Crystal Cove Panel Driver");
 MODULE_LICENSE("GPL and additional rights");
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 42b6d6f..6857d19 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -26,6 +26,7 @@
 #include <drm/drmP.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_edid.h>
+#include <drm/drm_panel.h>
 #include <drm/i915_drm.h>
 #include <linux/slab.h>
 #include "i915_drv.h"
@@ -230,6 +231,8 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder)
 
 	DRM_DEBUG_KMS("\n");
 
+	drm_panel_enable(intel_dsi->panel);
+
 	/* Disable DPOunit clock gating, can stall pipe
 	 * and we need DPLL REFA always enabled */
 	tmp = I915_READ(DPLL(pipe));
@@ -392,6 +395,8 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder)
 
 	msleep(intel_dsi->panel_off_delay);
 	msleep(intel_dsi->panel_pwr_cycle_delay);
+
+	drm_panel_disable(intel_dsi->panel);
 }
 
 static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
@@ -896,6 +901,17 @@ void intel_dsi_init(struct drm_device *dev)
 	fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
 	intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
 
+	/* Initialize the PMIC based drm_panel if available on the platform */
+	if (dev_priv->vbt.dsi.config->pwm_blc == PPS_BLC_PMIC) {
+		intel_dsi->panel = drm_find_panel_by_name("crystal_cove_panel");
+		if (!intel_dsi->panel) {
+			DRM_ERROR("PMIC Panel control will not work !!\n");
+			return;
+		}
+
+		drm_panel_attach(intel_dsi->panel, connector);
+	}
+
 	return;
 
 err:
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index 8fe2064..4a9242d 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -33,6 +33,9 @@
 #define DSI_DUAL_LINK_FRONT_BACK	1
 #define DSI_DUAL_LINK_PIXEL_ALT		2
 
+#define PPS_BLC_PMIC	0
+#define PPS_BLC_SOC	1
+
 struct intel_dsi_device {
 	unsigned int panel_id;
 	const char *name;
@@ -83,6 +86,8 @@ struct intel_dsi {
 
 	struct intel_connector *attached_connector;
 
+	struct drm_panel *panel;
+
 	/* bit mask of ports being driven */
 	u16 ports;
 
@@ -116,6 +121,7 @@ struct intel_dsi {
 	u32 dphy_reg;
 	u32 video_frmt_cfg_bits;
 	u16 lp_byte_clk;
+	u8 pps_blc;
 
 	/* timeouts in byte clocks */
 	u16 lp_rx_timeout;
-- 
1.9.1



More information about the dri-devel mailing list