[PATCH v2 0/7] imx-drm: ipuv3-crtc: Implement mode_fixup

[Philipp Zabel]

Hi Liu,

Am Freitag, den 23.01.2015, 10:56 +0800 schrieb Liu Ying:
> Hi,
> 
> It looks that the below commit makes my Hannstar XGA LVDS panel stop working
> on the i.MX6DL SabreSD board.  Any idea?
> 
> commit eb10d6355532def3a74aaabd115e2373cca70b9d
> Author: Steve Longerbeam <slongerbeam at gmail.com>
> Date:   Thu Dec 18 18:00:24 2014 -0800
> 
> imx-drm: encoder prepare/mode_set must use adjusted mode
> 
> The encoder ->prepare() and ->mode_set() methods need to use the
> hw adjusted mode, not the original mode.
> 
> Signed-off-by: Steve Longerbeam <steve_longerbeam at mentor.com>
> Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> 
> Regards,
> Liu Ying

What are this panel timings? The adjustment should increase the vertical
back porch by up to two lines (so it is at least two lines), reducing
the front porch or vsync length by the same amount. Does this panel use
the HSYNC/VSYNC signals embedded in the LVDS stream?

regards
Philipp